Notices
New Member Forum A place for new members to get their feet wet

Advice steering problem.

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 07-29-2017, 05:19 PM
  #1  
New Member
Thread Starter
 
Shaunm1981's Avatar
 
Join Date: Jul 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Angry Advice steering problem.

Recently acquired a 2004 rx8. Love the car. All fone was driving it when engine stalled and power went. After a few minutes the power restored. As I was driving it home suddenly the power steering light came on and the steering stiffened.

Upon opening the bonnet the first thing I noticed was very loose battery connectors (which I have changed). I have cleaned all connectors on the steering harness. The light is still on and the steering is still hard.

Any advice on what else could be and how to test to save me buying lots of parts that may not be required.
Old 07-29-2017, 05:29 PM
  #2  
Registered
 
Reoze's Avatar
 
Join Date: Feb 2017
Location: Austin, TX
Posts: 448
Received 50 Likes on 41 Posts
If you have a persistent light, get the codes checked.
Old 07-29-2017, 05:41 PM
  #3  
Smoking turbo yay
 
UnknownJinX's Avatar
 
Join Date: Apr 2017
Location: BC, Canada
Posts: 3,113
Received 668 Likes on 594 Posts
If the battery connection was loose, then you'd have to reset the power steering. Do you see a flashing DSC light?

When you reconnect the battery, go into the car, turn the key to ON(don't start it yet), then turn the steering wheel all the way to the left once, then all the way to the right. The flashing DSC light should go off. It should be good afterward.

S1 RX-8s also have the overflow tube directly above the power steering connector. A common practice is to reroute that tube to somewhere else so you don't have hot coolant dripping on the connector.
Old 07-29-2017, 05:46 PM
  #4  
New Member
Thread Starter
 
Shaunm1981's Avatar
 
Join Date: Jul 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
The sad light did come on and I reset should have said the light I have is a steering with exclamation mark. I read somewhere about the overflow tube. (Great design) I have fitted a new longer piece and 3rd routed this.
Old 07-30-2017, 02:41 AM
  #5  
New Member
Thread Starter
 
Shaunm1981's Avatar
 
Join Date: Jul 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Morning update.

So I decided to try the connectors again weirdly upon restarting the ps light disappeared....result...now when started it has been sat for a day I've noticed trace white smoke from exhaust and a burning smell?
Old 07-30-2017, 04:28 AM
  #6  
Registered
 
ogwazza's Avatar
 
Join Date: Jul 2017
Posts: 46
Received 3 Likes on 3 Posts
Possibly a slight oil leak, and it's getting into your connectors - I've read in the service manual that there is a lot of emphasis given on cleaning electrical connectors.
Old 07-31-2017, 05:24 AM
  #7  
Registered
 
Okki-Jakarta's Avatar
 
Join Date: Apr 2017
Location: Jakarta, Indonesia
Posts: 165
Received 8 Likes on 6 Posts
Originally Posted by Shaunm1981
Morning update.

So I decided to try the connectors again weirdly upon restarting the ps light disappeared....result...now when started it has been sat for a day I've noticed trace white smoke from exhaust and a burning smell?
Exactly same as mine. haha. i've almost given up. Send me some info if u found out what it is. Thanks!



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:02 PM.