Hard shift
#1
Hard shift
Well I made it 500 miles after loki help me fix the clutch safety switch lol now I'm having to hard shift and force my gears I checked the rod on the clutch and it's right idk what else it could be ideas
#3
#4
Registered
iTrader: (1)
So if the car crawla forward with clutch in, the clutch isn't disengaging fully and you need to either adjust the friction point higher on the pedal using the nuts on the clutch pushrod, or you bave clutch master or slave cylinder problem or there's aie in the clutch line.
Try to adjust the pedal first, if it helps and doesn't fet worse again with time, the hydraulics are probably fine. For adjustment you want to bring the pedal linkage closer to the firewall to raise the friction point.
Try to adjust the pedal first, if it helps and doesn't fet worse again with time, the hydraulics are probably fine. For adjustment you want to bring the pedal linkage closer to the firewall to raise the friction point.
#5
So if the car crawla forward with clutch in, the clutch isn't disengaging fully and you need to either adjust the friction point higher on the pedal using the nuts on the clutch pushrod, or you bave clutch master or slave cylinder problem or there's aie in the clutch line.
Try to adjust the pedal first, if it helps and doesn't fet worse again with time, the hydraulics are probably fine. For adjustment you want to bring the pedal linkage closer to the firewall to raise the friction point.
Try to adjust the pedal first, if it helps and doesn't fet worse again with time, the hydraulics are probably fine. For adjustment you want to bring the pedal linkage closer to the firewall to raise the friction point.
Thread
Thread Starter
Forum
Replies
Last Post
Reddix93
Series I Trouble Shooting
0
08-13-2011 03:05 PM
Unionville_2004_RX8
Series I Trouble Shooting
13
02-13-2011 08:35 AM
PRX8
Series I Aftermarket Performance Modifications
8
05-17-2008 11:03 AM