MAF cleaning, coil slightly bent
10-19-2015, 11:18 PM
#1
New Member
Thread Starter
Join Date: Oct 2015
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
MAF cleaning, coil slightly bent
Hiya Just checked and cleaned Ripley's MAF sensor.
I had a good look to see what i was working with and noticed that the one of the coils was slightly bent.
I went ahead and cleaned it all with isopropyl alcohol.
Logged a drive with Torque Pro. but ambient temps were very high, so hard to know if it had any effect.
It really wasn't that dirty.
But i'm thinking that because one of the coils is bent, it must be effecting it.
Anyone know where i can get my hands on a replacement? > Melbourne>Vic
my mileage is about 16L/100 - 340km max tank.
In the warm weather on 95. (switching to 98 now)
I had a good look to see what i was working with and noticed that the one of the coils was slightly bent.
I went ahead and cleaned it all with isopropyl alcohol.
Logged a drive with Torque Pro. but ambient temps were very high, so hard to know if it had any effect.
It really wasn't that dirty.
But i'm thinking that because one of the coils is bent, it must be effecting it.
Anyone know where i can get my hands on a replacement? > Melbourne>Vic
my mileage is about 16L/100 - 340km max tank.
In the warm weather on 95. (switching to 98 now)
Thread
Thread Starter
Forum
Replies
Last Post
madrotor
RX-8 Parts For Sale/Wanted
3
10-20-2015 09:27 PM