Notices
New Member Forum A place for new members to get their feet wet

New!! S1 2007 rx8 headlights are sh#t

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-21-2023, 06:05 PM
  #1  
Registered
Thread Starter
 
Angrybishop's Avatar
 
Join Date: Nov 2023
Location: Scotland
Posts: 9
Received 0 Likes on 0 Posts
New!! S1 2007 rx8 headlights are sh#t

Hello everyone so I got a rx8 after everyone saying no. Perfect car however I'm in Scotland and it's always dark and **** weather so the nights draw in early and the worst part about this car is the flecking headlights.
there s1 non hid lights and I've tried the good Philips h7s utter chap now I'm running leds but there just bad.
So please what can i do.
Can i swap the projector out for hid ones and then get a conversion kits.
can I just put hid conversion kit in
I know there is a difference inside the projector it's self from hid to halogen so I dono.
I can't find aftermarket,cant fid a answer surely someone has a idea.
the full beam are leds and there like foot ball stadium lights there OK but the dip is almost dangerous to drive with. I tend to use my fogs on aswell but thats not a long term solution.
please help with helpfully advice.
Old 12-21-2023, 06:49 PM
  #2  
Registered
iTrader: (1)
 
Loki's Avatar
 
Join Date: Jun 2009
Location: Montreal
Posts: 7,854
Received 982 Likes on 857 Posts
I would find original equipment HID lights, ballasts everything and swap that in. Can't imagine it needs changes upstream from the ballast..

Playing with mix of aftermarket parts rarely ends well.
The following users liked this post:
Jedi54 (12-24-2023)
Old 12-22-2023, 06:18 AM
  #3  
Registered
Thread Starter
 
Angrybishop's Avatar
 
Join Date: Nov 2023
Location: Scotland
Posts: 9
Received 0 Likes on 0 Posts
Yea I think I was going to dyi the hid projector lens and assembly and swap it to the s1 headlight but finding parts is now so dam rare

This is a pic of the halogon and hid assembly
Old 12-22-2023, 05:34 PM
  #4  
Smoking turbo yay
 
UnknownJinX's Avatar
 
Join Date: Apr 2017
Location: BC, Canada
Posts: 3,113
Received 669 Likes on 595 Posts
You can use this tutorial as a guide. It's for an S2, but the procedure should be generally the same as an S1.

https://www.rx8club.com/series-ii-di...y-swap-249205/

Wiring shouldn't be too bad since you only have to worry about the low beams. I would also make sure the headlight lenses aren't fogged. They tend to do that over time.
Old 12-22-2023, 08:53 PM
  #5  
Registered
Thread Starter
 
Angrybishop's Avatar
 
Join Date: Nov 2023
Location: Scotland
Posts: 9
Received 0 Likes on 0 Posts
Originally Posted by Angrybishop
Yea I think I was going to dyi the hid projector lens and assembly and swap it to the s1 headlight but finding parts is now so dam rare

This is a pic of the halogon and hid assembly
soon hard to get this parts tho it's turned into getting hens teeth for anything for the rx8 sadly it's a old car now
Old 12-24-2023, 02:10 PM
  #6  
Smoking turbo yay
 
UnknownJinX's Avatar
 
Join Date: Apr 2017
Location: BC, Canada
Posts: 3,113
Received 669 Likes on 595 Posts
Originally Posted by Angrybishop
soon hard to get this parts tho it's turned into getting hens teeth for anything for the rx8 sadly it's a old car now
I would think they have junkyards in the UK as well? We have a site called car-part.com that pulls up junkyard car parts in North America for us.

With any luck, you might even be able to swap in the whole HID headlight assembly into your 8 with fairly minimal rewiring. Unless you have DRL and it runs of the low beams(really uncommon, but I had a 05 Mazda3 hatchback that did that so I am not ruling it out), I think you just have to figure something out for the low beams and the rest should be plug and play(though you won't have the headlight leveling features).

The headlights on the Mazda3 hatchbacks are fine with good halogen bulbs, BTW. Not nearly as good as the HID in my Speed3 now, but they worked fine. Make sure they are properly leveled and polish them if they are foggy.

Last edited by UnknownJinX; 12-24-2023 at 02:13 PM.
Old 12-24-2023, 03:19 PM
  #7  
Registered
Thread Starter
 
Angrybishop's Avatar
 
Join Date: Nov 2023
Location: Scotland
Posts: 9
Received 0 Likes on 0 Posts
Originally Posted by UnknownJinX
I would think they have junkyards in the UK as well? We have a site called car-part.com that pulls up junkyard car parts in North America for us.

With any luck, you might even be able to swap in the whole HID headlight assembly into your 8 with fairly minimal rewiring. Unless you have DRL and it runs of the low beams(really uncommon, but I had a 05 Mazda3 hatchback that did that so I am not ruling it out), I think you just have to figure something out for the low beams and the rest should be plug and play(though you won't have the headlight leveling features).

The headlights on the Mazda3 hatchbacks are fine with good halogen bulbs, BTW. Not nearly as good as the HID in my Speed3 now, but they worked fine. Make sure they are properly leveled and polish them if they are foggy.
i did try the Philips goods ones the halogon but even they was bad but yea mazda 3 have good lights ill see if there is any brokers that have the rx8 in for parts and maybe try the hid swap. Gonna take that bumper off again lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
richcoto
Series I Exterior Appearance and Body Kits
32
04-14-2015 10:44 AM
jim123321
Series I Exterior Appearance and Body Kits
0
04-25-2011 05:35 PM
jtabraham
Series I Exterior Appearance and Body Kits
10
01-07-2010 01:01 PM
lopezian2004
Series I Exterior Appearance and Body Kits
7
09-30-2008 06:57 PM
xxdevilzeroxx
Series I Exterior Appearance and Body Kits
5
02-01-2005 10:32 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: New!! S1 2007 rx8 headlights are sh#t



All times are GMT -5. The time now is 03:47 AM.