New SSV Valve still rattles. Help!!
03-18-2020, 06:42 PM
#1
Registered
Thread Starter
Join Date: Jan 2020
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
New SSV Valve still rattles. Help!!
So I bought a new SSV from Japan. The whole set with the switch included because my old ssv was rattling like crazy. And I still hear that sucker rattle. It’s driving me crazy cause I can’t figure out what else to do.
03-21-2020, 05:22 PM
#5
Registered
Thread Starter
Join Date: Jan 2020
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Yup. I checked the Solenoid. It’s perfect. It seems to be the shaft. If I put pressure on the shaft no more noise. But if I let it go it back to its regular tapping sound. The SSV is brand new. Not sure why it could be tapping .
03-21-2020, 06:07 PM
#6
I had assumed you checked the shaft in the original one and only replaced it because the arm was loose on it.
You should do a compression check then. Could be one or more bad rotor side seals.
.
You should do a compression check then. Could be one or more bad rotor side seals.
.
Last edited by TeamRX8; 03-21-2020 at 06:10 PM.
Thread
Thread Starter
Forum
Replies
Last Post