sreetported 8 wont idle please help
#26
SARX Legend
iTrader: (46)
I am turbocharged as well but it was tuned by Steve Kan.
PRT Performance | Lewisville Performance Shop | Dallas Auto Services | Dyno Tuning
PRT Performance | Lewisville Performance Shop | Dallas Auto Services | Dyno Tuning
#27
I am turbocharged as well but it was tuned by Steve Kan.
PRT Performance | Lewisville Performance Shop | Dallas Auto Services | Dyno Tuning
PRT Performance | Lewisville Performance Shop | Dallas Auto Services | Dyno Tuning
#31
Its not broke if any thing it has came alive.The car is so much quicker and faster it is awsome just got to step up the idle.
#32
#33
SARX Legend
iTrader: (46)
Yeah but in my experience ported Renesis engines usually idle just fine, they may idle a little low and lopey but they idle. Three of us locally are ported by different people. I just had to bump mine up to idle smooth (personal preference really), the other two guys left theirs alone. It shouldn't die.
Last edited by 9krpmrx8; 06-05-2015 at 05:50 PM.
#35
Yeah but in my experience ported Renesis engines usually idle, they may idle a little low and lopey but they idle. Three of us locally are ported by different people. I just had to bump mine up to idle smooth (personal preference really), the other two guys left theirs alone.
#37
SARX Legend
iTrader: (46)
Well I would do a vacuum test while warm and then depending on those results, then do smoke test for vacuum leaks, and then depending on those results, start thinking about a compression test.
#38
Driving my unreliable rx8
sreetported 8 wont idle please help
Have you personally checked your neutral position switch. And injector wiring?
On top of the vac test. You should check fuel trims and maf g/sec and volts.
On top of the vac test. You should check fuel trims and maf g/sec and volts.
#39
You would think if it was low compression it would suffer hot start problems. No mater how long it runs it starts right back up . Could there still be a compression problem?
#42
Driving my unreliable rx8
that will do it. just a FYI. a OBd 2 dongle and the torque app would have pointed to that almost immediately. And thank you for posting the solution. one of the biggest reasons people don't find answers is people don't post how they solved the problem.
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
Danield97
Series I Trouble Shooting
1
09-30-2015 05:59 PM