Wont stay idling
#1
Wont stay idling
Okay , i bought my 04 RX-8 about 2 months ago, ive replaced the vacuum sensor, throttle body , all fresh plugs wires and fluids. And im still having this problem, CEL comes up at high idle and IMT VALVE STUCK OPEN. anyone point me in the right direction?
#2
Registered
iTrader: (1)
Vacuum sensor?
One of the intake valves is stuck open, usually the SSV. It's in the lower intake manifold and can get gunked up. You can try to free it by hand by moving the actuator, but the proper solution is to take it out and clean it.
If you've replaced the spark plugs and wires, you should probably replace the coils as well. #1 killer of RX8s.
One of the intake valves is stuck open, usually the SSV. It's in the lower intake manifold and can get gunked up. You can try to free it by hand by moving the actuator, but the proper solution is to take it out and clean it.
If you've replaced the spark plugs and wires, you should probably replace the coils as well. #1 killer of RX8s.
Last edited by Loki; 04-28-2020 at 03:07 PM.
#4
Registered
It’s P2070 I’m sure. Clean fuel injectors would be the easiest plan of attack. That may be the issue as that code can indicate clogged fuel injectors. If it’s not that then I would suspect an issue in the intake manifold. Could be difficult to fix if the fuel injectors are working fine.
Thread
Thread Starter
Forum
Replies
Last Post
Bladerunner
Series I Trouble Shooting
7
06-25-2010 09:38 PM