Originally Posted by 9krpmrx8
(Post 4662483)
Of course now you are only interested in the small turbo Renny
Your mouth wrote a check your turdbo renny can't cash!:yelrotflm . |
Originally Posted by 9krpmrx8
(Post 4662483)
Of course now you are only interested in the small turbo Renny, :lol: My car should be plenty though. And of course it would be video taped, I would not have it any other way. Having video of my car beating an LS swapped RX-8 would make my year. If I lose well, I lost to a LS swapped RX-8 :)
|
Originally Posted by firecran
(Post 4662509)
Talk so much shit and now making excuses? :scared:
Your mouth wrote a check your turdbo renny can't cash!:yelrotflm . :lol: LSXREX was talking shit about rotaries in general, not just the Renesis. I will likely run times similar to your big turbo REW. That is my goal anyway, we shall see how the switch of ECU's and E85 goes. If not then I use the top mount kit I have and go EFR. Either way it will be on a renny no matter what. As for talking shit, you talk a lot for a guy running a best of 12.7's on drag radials, :lol: All that HP and you are barely faster than a "turdbo renny" running a 60-1. Now that is amusing to me. |
Originally Posted by RIWWP
(Post 4662488)
9k, make sure to get a lot of good video and pictures of all of his cut corners stuff that won't ever fail on him
Though I'd be tempted to lay a bet that some unforseen (and magically unrelated?) problem would prevent him from showing up. Kid got sick is a pretty good chance.
Originally Posted by 9krpmrx8
(Post 4662483)
Of course now you are only interested in the small turbo Renny, :lol: My car should be plenty though. And of course it would be video taped, I would not have it any other way. Having video of my car beating an LS swapped RX-8 would make my year. If I lose well, I lost to a LS swapped RX-8 :)
|
Originally Posted by 9krpmrx8
(Post 4662512)
:lol: LSXREX was talking shit about rotaries in general, not just the Renesis. I will likely run times similar to your big turbo REW. That is my goal anyway, we shall see how the switch of ECU's and E85 goes. If not then I use the top mount kit I have and go EFR. Either way it will be on a renny no matter what.
As for talking shit, you talk a lot for a guy running a best of 12.7's on drag radials, :lol: All that HP and you are barely faster than a "turdbo renny" running a 60-1. Now that is amusing to me. I made myself pretty clear on my stance on rotaries. I wasn't challenging them all. Rotary's reputation isn't very good. Only a few last year at TX2K and they were barely quick enough to be third string camera cars. You made things personal talking so much shit op about the car. I'm looking to show you where a garage built LS swap (that works) falls in line in front of your roturd. Beating you would just be a bonus. I guess I can play the 9k card. "If I win then I beat the prettiest RX8 in the world. And if I lose well then I'll just come back with a 125 wet shot and radials." |
I wish you both would both shut up and build something for a change ...
. |
Or get a room !
|
:lol: nothing here is personal I assure you. I don't even know you, I just like getting a rise out of you (lot's of people actually). If you can't take the ribbing then I suggest the PurelyRX8 group on FB, they will tell you how great your RX-8 is all day long. As for who is faster, well that is to be determined.
|
Originally Posted by 9krpmrx8
(Post 4662512)
:lol: LSXREX was talking shit about rotaries in general, not just the Renesis. I will likely run times similar to your big turbo REW. That is my goal anyway, we shall see how the switch of ECU's and E85 goes. If not then I use the top mount kit I have and go EFR. Either way it will be on a renny no matter what.
As for talking shit, you talk a lot for a guy running a best of 12.7's on drag radials, :lol: All that HP and you are barely faster than a "turdbo renny" running a 60-1. Now that is amusing to me. Big turbo REW....... That to funny!! You are so clueless..... Try again! I ran a 12.7@115 on 12psi with no launch. If you had a clue you would know there's plenty more in it. As we can see by your post you don't! Its not about me it's about you getting a LS in that big mouth. :yelrotflm . |
No launch, blah, blah, blah. Well let's see the plenty more then. You talk as much shit as anyone, :lol:
|
Originally Posted by TeamRX8
(Post 4662534)
I wish you both would both shut up and build something for a change ... .
|
I'm starting to think some people need to be excluded from accessing this particular section of the forum for constant negativity ... last I checked this section of the forum is for people who want to swap whatever the hell they desire into their car.
Is it a smart swap - who cares will it be successful - who cares is motor x better than a rotary - who cares intellectual discussion and progress - this is what matters If you can't fathom the idea that there are individuals out there who just dont care for the rotary engine, then this is not the section for you, its that simple. No one is forcing anyone to remain active in this section of the forum. edit: to clarify, the bashing of swaps is fine and dandy, but we are getting awful close to personal attacks (at least in my opinion) and maybe even a hint of street racing ('rolling' on people). Now get some damn pics up |
I would say it isn't personal considering I haven't even met anyone here. Let's clear the air here with Mr. LSXREX. I don't hate people who own rotaries. Actually I wish more of my friends owned them so I could give them shit about it. I don't even hate the rotary that much. It's a very interested design and definately has its uses. Rotary engines will always be in the backseat when even compared with the worst piston motors. I'll pipe down about the rotary hatred everywhere except this thread. But that doesn't mean I don't want to roll 9k's ass. Only bc he is local and seems to be the head honcho when it comes to rotaries. Who knows maybe we will have a beer after. Lol? How about we put something on the line 9k? If you lose, you have to introduce EVERY piston swap thread with your love for piston goodness, blah blah blah. I'll write something up for ya. And if I lose? Well you can fill in the blank on that one.
|
Originally Posted by paimon.soror
(Post 4662595)
I'm starting to think some people need to be excluded from accessing this particular section of the forum for constant negativity ... last I checked this section of the forum is for people who want to swap whatever the hell they desire into their car.
Is it a smart swap - who cares will it be successful - who cares is motor x better than a rotary - who cares intellectual discussion and progress - this is what matters If you can't fathom the idea that there are individuals out there who just dont care for the rotary engine, then this is not the section for you, its that simple. No one is forcing anyone to remain active in this section of the forum. Go back and read the beginning of dannobre's idea. It just seems some people's idea of "Fun" is not the same as others. This is basically the swap trash talk thread. |
Keep in mind that although this is a "trash talk thread" it isn't void of forum rules. ;)
|
Originally Posted by LSXREX
(Post 4662604)
I would say it isn't personal considering I haven't even met anyone here. Let's clear the air here with Mr. LSXREX. I don't hate people who own rotaries. Actually I wish more of my friends owned them so I could give them shit about it. I don't even hate the rotary that much. It's a very interested design and definately has its uses. Rotary engines will always be in the backseat when even compared with the worst piston motors. I'll pipe down about the rotary hatred everywhere except this thread. But that doesn't mean I don't want to roll 9k's ass. Only bc he is local and seems to be the head honcho when it comes to rotaries. Who knows maybe we will have a beer after. Lol? How about we put something on the line 9k? If you lose, you have to introduce EVERY piston swap thread with your love for piston goodness, blah blah blah. I'll write something up for ya. And if I lose? Well you can fill in the blank on that one.
|
Dammit man that was a try at an apology. Every time I get "hostile" people get their feelings hurt and I get banned. These rotary guys really take digs at their motors personally. I began to lose interest after the discussion turned to high 12 second times from turbo cars. I've been faster in a full weight, bolt on, f boat on street tires.
|
Personally I think this thread is a great idea. And I don't hate swaps. I think kickerfox's is hilarious. The VR6 one might just take the cake though, we shall see. But if either get finished properly I will be the first to give props. I'm not holding my breath though.
Oh and rolling an LS swap RX-8 would be wonderful. I hope I get to try. If I fail I will catch a ton of shit from my rotary hating friends. |
I'm definately down to run 9k. I'm in Austin. I gotta do a shakedown T&T night though, I seriously can't keep this fucker straight. The 60' is gonna be minutes
|
Why not try just letting it go for a change? You don't gave to reply/apologize/respond to every single freaking post ....
|
speak for yourself. I'm over it.
|
......... :rolleyes:
|
Originally Posted by 9krpmrx8
(Post 4662561)
No launch, blah, blah, blah. Well let's see the plenty more then. You talk as much shit as anyone, :lol:
Oh wait your the same guy that sent off for a rebuild because you werent comfortable rebuilding a rotary :yelrotflm :yelrotflm ...mod edit . |
Let's keep it civil folks.
Trash talk about a car/build/etc is fine; not about a person. This is the last warning before I start moderating this thread with a heavy hand. |
Originally Posted by LSXREX
(Post 4662529)
Let's make something clear. DONT talk about my child. I am game for shit talking but don't bring up kids again.
|
All times are GMT -5. The time now is 01:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands