Ls1
#26
Registered User
Join Date: Dec 2003
Location: Boulder/Denver, Colorado
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Yipes... and imagine all the work that would have to be done beefing up the tranny too, that could get expensive. At least I don't think the stock tranny on a 8 could handle the torque of an LS1??
Putting down over twice the torque of the renesis in an RX8 would be a helluva good time though!!!
Putting down over twice the torque of the renesis in an RX8 would be a helluva good time though!!!
#27
Registered
Originally Posted by PetersonPeleRx8
Yipes... and imagine all the work that would have to be done beefing up the tranny too, that could get expensive. At least I don't think the stock tranny on a 8 could handle the torque of an LS1??
Putting down over twice the torque of the renesis in an RX8 would be a helluva good time though!!!
Putting down over twice the torque of the renesis in an RX8 would be a helluva good time though!!!
#28
Drift Fanatic
Join Date: Mar 2005
Location: East Texas
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
20b swap would be the most reasonable engine swap if you ask me.
still has the same basics as the 13b just with 1 more rotor.
654cc x 3 = (1,962cc) 20b displacement
so its basically a 2.0 litre naturally aspirated engine making somewhere around 300hp if i stand correct on my estimation
still has the same basics as the 13b just with 1 more rotor.
654cc x 3 = (1,962cc) 20b displacement
so its basically a 2.0 litre naturally aspirated engine making somewhere around 300hp if i stand correct on my estimation
Last edited by Diabolical RX8; 03-20-2005 at 07:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post