SR20 Drift Build
#27
Project Addict
Thread Starter
Hammer and chisel FTW
I bought it to break it
And boy will I have fun along the way...
Cheers fella, thanks alot...
Been kept going with removing the sound proofing from the passenger foot well and drivers foot well :
![Name: 0030.jpg
Views: 1989
Size: 116.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237238d1501244386-sr20-drift-build-0030.jpg)
![Name: 0031.jpg
Views: 1988
Size: 117.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237239d1501244386-sr20-drift-build-0031.jpg)
And now the dreaded wiring, this f'ing car is riddled with wires, labelling plugs![Frown](https://www.rx8club.com/images/smilies/frown.gif)
![Name: 0032.jpg
Views: 1969
Size: 48.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237240d1501244386-sr20-drift-build-0032.jpg)
![Name: 0033.jpg
Views: 1990
Size: 58.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237241d1501244386-sr20-drift-build-0033.jpg)
Can't wait to see this thing with a full wide arch kit dropped on its ring![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0034.jpg)
Then got stuck into ripping out the heater matrix and more sound proffing from the firewall, small bit more to chisel off the foot wells but almost complete, nearly ready to receive the cage![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0035.jpg
Views: 1996
Size: 121.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237242d1501244386-sr20-drift-build-0035.jpg)
![Name: 0036.jpg
Views: 1962
Size: 114.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237243d1501244386-sr20-drift-build-0036.jpg)
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Cheers fella, thanks alot...
Been kept going with removing the sound proofing from the passenger foot well and drivers foot well :
![Name: 0030.jpg
Views: 1989
Size: 116.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237238d1501244386-sr20-drift-build-0030.jpg)
![Name: 0031.jpg
Views: 1988
Size: 117.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237239d1501244386-sr20-drift-build-0031.jpg)
And now the dreaded wiring, this f'ing car is riddled with wires, labelling plugs
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
![Name: 0032.jpg
Views: 1969
Size: 48.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237240d1501244386-sr20-drift-build-0032.jpg)
![Name: 0033.jpg
Views: 1990
Size: 58.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237241d1501244386-sr20-drift-build-0033.jpg)
Can't wait to see this thing with a full wide arch kit dropped on its ring
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0034.jpg)
Then got stuck into ripping out the heater matrix and more sound proffing from the firewall, small bit more to chisel off the foot wells but almost complete, nearly ready to receive the cage
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0035.jpg
Views: 1996
Size: 121.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237242d1501244386-sr20-drift-build-0035.jpg)
![Name: 0036.jpg
Views: 1962
Size: 114.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237243d1501244386-sr20-drift-build-0036.jpg)
![Name: 0037.jpg
Views: 1978
Size: 109.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237244d1501244386-sr20-drift-build-0037.jpg)
#28
Project Addict
Thread Starter
So here is todays quick update, there was a drip, drip, drip from the pipes leading to the oil coolers and it was getting on my nerves and the garage floor so they had to come out. Threw the car up on axle stands got ripping the splash gaurds from the front arches.
![Name: 0038.jpg
Views: 2058
Size: 127.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237219d1501244360-sr20-drift-build-0038.jpg)
I don't think Mazda used enough bolts and clips![Roll Eyes (Sarcastic)](https://www.rx8club.com/images/smilies/rolleyes.gif)
![Name: 0039.jpg
Views: 1980
Size: 139.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237220d1501244360-sr20-drift-build-0039.jpg)
Unbolted the corners of the bumper which gave me access to the top bolts on the cooolers, 3 more bolts and the complete system dropped out, some set up to have direct from the factory.
![Name: 0040.jpg
Views: 2002
Size: 192.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237221d1501244360-sr20-drift-build-0040.jpg)
Job as usual cut short by crap weather, so back to the garage until tomorrow, bless Ireland LoL
![Name: 0038.jpg
Views: 2058
Size: 127.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237219d1501244360-sr20-drift-build-0038.jpg)
I don't think Mazda used enough bolts and clips
![Roll Eyes (Sarcastic)](https://www.rx8club.com/images/smilies/rolleyes.gif)
![Name: 0039.jpg
Views: 1980
Size: 139.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237220d1501244360-sr20-drift-build-0039.jpg)
Unbolted the corners of the bumper which gave me access to the top bolts on the cooolers, 3 more bolts and the complete system dropped out, some set up to have direct from the factory.
![Name: 0040.jpg
Views: 2002
Size: 192.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237221d1501244360-sr20-drift-build-0040.jpg)
Job as usual cut short by crap weather, so back to the garage until tomorrow, bless Ireland LoL
![Name: 0041.jpg
Views: 1948
Size: 89.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237222d1501244360-sr20-drift-build-0041.jpg)
#30
Project Addict
Thread Starter
No just crappy Irish rain as per usual ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
So haven't done a whole lot over the weekend barr finish off the jobs I started, it took a few days but 15kgs lighter now thankfully. Just have the last of the glue to remove from the drivers side foot well.
![Name: 0042.jpg
Views: 1978
Size: 86.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237171d1501244262-sr20-drift-build-0042.jpg)
I had planned on stripping the front doors down like the rear but there is a second skin and the window harness and runner is bolted to it so the weight saving there is on hold until I get the fibreglass doors and lexan kit. All I could really remove were the speakers.
![Name: 0043.jpg
Views: 2232
Size: 92.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237172d1501244262-sr20-drift-build-0043.jpg)
![Name: 0044.jpg
Views: 1946
Size: 116.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237173d1501244262-sr20-drift-build-0044.jpg)
![Name: 0045.jpg
Views: 1989
Size: 127.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237174d1501244262-sr20-drift-build-0045.jpg)
I've only ever seen the car in darkness or partial light due to being in the garage so brought her out for a wash to get an idea of what repairs are need, awkward dent on the passenger rear door, front and rear bumpers are being replaced so nothing needed there and all thats left is the drivers side wing so I happy enough, big weight off my mind is there is no rust repair needed thankfully as I was concerned being from the uk originally...
![Name: 0046.jpg
Views: 1974
Size: 128.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237175d1501244262-sr20-drift-build-0046.jpg)
![Name: 0047.jpg
Views: 1978
Size: 138.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237176d1501244262-sr20-drift-build-0047.jpg)
![Name: 0048.jpg
Views: 1980
Size: 123.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237177d1501244262-sr20-drift-build-0048.jpg)
![Name: 0049.jpg
Views: 1977
Size: 122.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237178d1501244262-sr20-drift-build-0049.jpg)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
So haven't done a whole lot over the weekend barr finish off the jobs I started, it took a few days but 15kgs lighter now thankfully. Just have the last of the glue to remove from the drivers side foot well.
![Name: 0042.jpg
Views: 1978
Size: 86.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237171d1501244262-sr20-drift-build-0042.jpg)
I had planned on stripping the front doors down like the rear but there is a second skin and the window harness and runner is bolted to it so the weight saving there is on hold until I get the fibreglass doors and lexan kit. All I could really remove were the speakers.
![Name: 0043.jpg
Views: 2232
Size: 92.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237172d1501244262-sr20-drift-build-0043.jpg)
![Name: 0044.jpg
Views: 1946
Size: 116.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237173d1501244262-sr20-drift-build-0044.jpg)
![Name: 0045.jpg
Views: 1989
Size: 127.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237174d1501244262-sr20-drift-build-0045.jpg)
I've only ever seen the car in darkness or partial light due to being in the garage so brought her out for a wash to get an idea of what repairs are need, awkward dent on the passenger rear door, front and rear bumpers are being replaced so nothing needed there and all thats left is the drivers side wing so I happy enough, big weight off my mind is there is no rust repair needed thankfully as I was concerned being from the uk originally...
![Name: 0046.jpg
Views: 1974
Size: 128.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237175d1501244262-sr20-drift-build-0046.jpg)
![Name: 0047.jpg
Views: 1978
Size: 138.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237176d1501244262-sr20-drift-build-0047.jpg)
![Name: 0048.jpg
Views: 1980
Size: 123.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237177d1501244262-sr20-drift-build-0048.jpg)
![Name: 0049.jpg
Views: 1977
Size: 122.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237178d1501244262-sr20-drift-build-0049.jpg)
![Name: 0050.jpg
Views: 1990
Size: 143.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237179d1501244262-sr20-drift-build-0050.jpg)
#31
Can i suggest that you use a particularly cheap but highly reputable manufacturer of lexan windows that's active up in the uk? ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
They have both rail-less and complete window kits for 450-600€ (depending on the rail\sliders)... That's half of what other manufacturer charge.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
They have both rail-less and complete window kits for 450-600€ (depending on the rail\sliders)... That's half of what other manufacturer charge.
#32
Project Addict
Thread Starter
Was up in Yowdy’s last night so just got a few pic’s of the parts we have ready to go in.
RB25 Box and Adapter plate thanks to Alan Sinnott.
![Name: 0051.jpg
Views: 1977
Size: 64.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237116d1501244180-sr20-drift-build-0051.jpg)
SR20 Engine with metal headgasket and lightweight flywheel thanks to Gem
![Name: 0052.jpg
Views: 2004
Size: 119.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237117d1501244180-sr20-drift-build-0052.jpg)
![Name: 0053.jpg
Views: 2007
Size: 81.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237118d1501244180-sr20-drift-build-0053.jpg)
![Name: 0054.jpg
Views: 1978
Size: 99.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237119d1501244180-sr20-drift-build-0054.jpg)
Exedy stage 2 clutch, J Performance Rad and Cooler thanks to Dave in Japanese Performance
![Name: 0055.jpg
Views: 1968
Size: 102.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237120d1501244180-sr20-drift-build-0055.jpg)
![Name: 0056.jpg
Views: 1991
Size: 93.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237121d1501244180-sr20-drift-build-0056.jpg)
![Name: 0057.jpg
Views: 1958
Size: 93.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237122d1501244180-sr20-drift-build-0057.jpg)
![Name: 0058.jpg
Views: 1956
Size: 50.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237123d1501244180-sr20-drift-build-0058.jpg)
![Name: 0059.jpg
Views: 1984
Size: 100.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237124d1501244180-sr20-drift-build-0059.jpg)
![Name: 0060.jpg
Views: 1955
Size: 85.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237125d1501244180-sr20-drift-build-0060.jpg)
Finally a pedal box and hydro that Yowdy sourced
![Name: 0061.jpg
Views: 1968
Size: 94.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237126d1501244180-sr20-drift-build-0061.jpg)
![Name: 0062.jpg
Views: 1961
Size: 96.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/237127d1501244180-sr20-drift-build-0062.jpg)
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0063.jpg)
Last edited by Kruizer; 01-24-2012 at 02:37 AM.
#33
http://www.plastics4performance.com
This is the company anyway, in case you have trouble with the rear window especially... that one is nearly impossible to replicate with a flat sheet.
Is the pedal box one of obp ltd ones?
This is the company anyway, in case you have trouble with the rear window especially... that one is nearly impossible to replicate with a flat sheet.
Is the pedal box one of obp ltd ones?
#34
Registered
iTrader: (1)
Join Date: Jul 2010
Location: san diego,ca
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
http://www.plastics4performance.com
This is the company anyway, in case you have trouble with the rear window especially... that one is nearly impossible to replicate with a flat sheet.
Is the pedal box one of obp ltd ones?
This is the company anyway, in case you have trouble with the rear window especially... that one is nearly impossible to replicate with a flat sheet.
Is the pedal box one of obp ltd ones?
#36
Project Addict
Thread Starter
http://www.plastics4performance.com
This is the company anyway, in case you have trouble with the rear window especially... that one is nearly impossible to replicate with a flat sheet.
Is the pedal box one of obp ltd ones?
This is the company anyway, in case you have trouble with the rear window especially... that one is nearly impossible to replicate with a flat sheet.
Is the pedal box one of obp ltd ones?
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
No idea of brand mate sorry
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I decided to keep my monster Works Wheels and will use these as a point of reference so I can build the wings and quarters, must pick up another pair for the rear something like 18 x 11JJ or 11.5JJ -10 offset as I don’t fancy ripping up 315’s… Back onto Dave to wreck his head some more…
Work Meister S1’s
Front 18 x 11JJ +10 offset : Tires 255 / 35 / R18
Rear 18 x 13.5JJ -10 offset : Tires 315 / 30 / R18
![Name: 0064.jpg
Views: 1981
Size: 68.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236995d1501243936-sr20-drift-build-0064.jpg)
#38
Project Addict
Thread Starter
The front will stay put, gonna use the rears as a show piece and track down some 18 x 10 Meisters with spacers for the track ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Did a bit more ripping, took out all the pedals, master cylinder and abs unit...
![Name: 0065.jpg
Views: 1980
Size: 100.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236949d1501243849-sr20-drift-build-0065.jpg)
![Name: 0066.jpg
Views: 1983
Size: 133.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236950d1501243849-sr20-drift-build-0066.jpg)
The engine bay is starting to look alot cleaner, except for that monstrous loom !
![Name: 0067.jpg
Views: 1989
Size: 147.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236951d1501243849-sr20-drift-build-0067.jpg)
Dave in JP sent me a pic of my turbo kit, TD06 20g freshly rebuilt with a topmount manifold and hks wastegate
The pic of the coilovers was the box, not even opened LoL
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Did a bit more ripping, took out all the pedals, master cylinder and abs unit...
![Name: 0065.jpg
Views: 1980
Size: 100.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236949d1501243849-sr20-drift-build-0065.jpg)
![Name: 0066.jpg
Views: 1983
Size: 133.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236950d1501243849-sr20-drift-build-0066.jpg)
The engine bay is starting to look alot cleaner, except for that monstrous loom !
![Name: 0067.jpg
Views: 1989
Size: 147.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236951d1501243849-sr20-drift-build-0067.jpg)
Dave in JP sent me a pic of my turbo kit, TD06 20g freshly rebuilt with a topmount manifold and hks wastegate
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0068.jpg
Views: 1955
Size: 94.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236952d1501243849-sr20-drift-build-0068.jpg)
Last edited by Kruizer; 01-27-2012 at 02:47 AM.
#39
Project Addict
Thread Starter
So just a small update, I was onto Brian in Driftkits.eu and looking for a vent to build into my own bonnet, so he cut up an S15 skin he had in stock, legend ! Looking forward to fitting it once it arrives ![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Name: 0069.jpg
Views: 1986
Size: 63.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236837d1501243618-sr20-drift-build-0069.jpg)
And the next pic is probably my favourite of the thread to date, I got a set of Bride Fixed back seats in red and head protection, saw them in Ffrenchie’s ages ago but a mate of mine bought them, they came up for sale so I bit the bullet and doubled my budget on seats, should look awesome in the car…
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Name: 0069.jpg
Views: 1986
Size: 63.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236837d1501243618-sr20-drift-build-0069.jpg)
And the next pic is probably my favourite of the thread to date, I got a set of Bride Fixed back seats in red and head protection, saw them in Ffrenchie’s ages ago but a mate of mine bought them, they came up for sale so I bit the bullet and doubled my budget on seats, should look awesome in the car…
![Name: 0070.jpg
Views: 1963
Size: 105.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236838d1501243618-sr20-drift-build-0070.jpg)
#44
Project Addict
Thread Starter
Me too ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I'm sure you'll build something bad *** dude ! ![Wink](https://www.rx8club.com/images/smilies/wink.gif)
LoL
Don't show him this thread so fella...
Finished removing all the glue with petrol left over from the sound deadening, took off the heat cover under the bonnet, lined up the vent and have it ready for cutting tomorrow![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Weird looking bonnet...
![Name: 0071.jpg
Views: 1952
Size: 81.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236750d1501243457-sr20-drift-build-0071.jpg)
Everything outside the masking tape is now waste, will have to fit the vents seperately to avoid the standard dip in the original bonnet...
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
LoL
Don't show him this thread so fella...
Finished removing all the glue with petrol left over from the sound deadening, took off the heat cover under the bonnet, lined up the vent and have it ready for cutting tomorrow
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Weird looking bonnet...
![Name: 0071.jpg
Views: 1952
Size: 81.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236750d1501243457-sr20-drift-build-0071.jpg)
Everything outside the masking tape is now waste, will have to fit the vents seperately to avoid the standard dip in the original bonnet...
![Name: 0072.jpg
Views: 1952
Size: 34.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236751d1501243457-sr20-drift-build-0072.jpg)
#46
04 NORDIC GREEN RX8
iTrader: (3)
Join Date: Aug 2009
Location: brentwood tn
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Thanks fella, I may use them for the rear screen ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
No idea of brand mate sorry![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I would say so...
Hopefully not, reason for it is to empty the bay and my abs won't work with the new stoppers...
I decided to keep my monster Works Wheels and will use these as a point of reference so I can build the wings and quarters, must pick up another pair for the rear something like 18 x 11JJ or 11.5JJ -10 offset as I don’t fancy ripping up 315’s… Back onto Dave to wreck his head some more…
Work Meister S1’s
Front 18 x 11JJ +10 offset : Tires 255 / 35 / R18
Rear 18 x 13.5JJ -10 offset : Tires 315 / 30 / R18
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0064.jpg)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
No idea of brand mate sorry
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I would say so...
Hopefully not, reason for it is to empty the bay and my abs won't work with the new stoppers...
I decided to keep my monster Works Wheels and will use these as a point of reference so I can build the wings and quarters, must pick up another pair for the rear something like 18 x 11JJ or 11.5JJ -10 offset as I don’t fancy ripping up 315’s… Back onto Dave to wreck his head some more…
Work Meister S1’s
Front 18 x 11JJ +10 offset : Tires 255 / 35 / R18
Rear 18 x 13.5JJ -10 offset : Tires 315 / 30 / R18
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0064.jpg)
holy ****! good luck getting those to fit! lol should look crazy dope if it works out tho
#49
FULLY SEMI AUTOMATIC
iTrader: (9)
ive been watching this from the get go, figured i would sub.
great work man
why are these swaps so common in every country but the us? theres a bunch over in the sand box
great work man
why are these swaps so common in every country but the us? theres a bunch over in the sand box
#50
Project Addict
Thread Starter
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Thanks mate...
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Have the bonnet marked up ready for cutting tomorrow...
![Name: 0073.jpg
Views: 1952
Size: 45.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236677d1501243212-sr20-drift-build-0073.jpg)
How it should look...
![Name: 0074.jpg
Views: 1939
Size: 45.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236678d1501243212-sr20-drift-build-0074.jpg)
Said I'd resort to using the Limerick method of removing the spoiler...
![Name: 0075.jpg
Views: 1942
Size: 89.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236679d1501243212-sr20-drift-build-0075.jpg)
Debadged and spoiler off, just getting the last few shitty bits done before she goes away Sunday...
![Name: 0076.jpg
Views: 1937
Size: 65.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/236680d1501243212-sr20-drift-build-0076.jpg)