SR20 Drift Build
#101
Project Addict
Thread Starter
Cheers Dan...
Its getting there slowly...
Dude I just opened a tin of filler and started one day, you can too...
Thanks mate, bit more to do now![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Lining it up...
![Name: 0105.jpg
Views: 1276
Size: 140.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235260d1501239847-sr20-drift-build-0105.jpg)
Bit more to trim...
![Name: 0106.jpg
Views: 1304
Size: 116.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235261d1501239847-sr20-drift-build-0106.jpg)
Getting the angle right...
![Name: 0107.jpg
Views: 1303
Size: 140.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235262d1501239847-sr20-drift-build-0107.jpg)
Masked up with cardboard and filled with expanding foam...
![Name: 0108.jpg
Views: 1295
Size: 95.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235263d1501239847-sr20-drift-build-0108.jpg)
Should be ready for shaping tomorrow...
![Name: 0109.jpg
Views: 1284
Size: 60.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235264d1501239847-sr20-drift-build-0109.jpg)
And a shot of the new BC Coilovers from Japanese Performance...
![Name: 0110.jpg
Views: 1278
Size: 55.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235265d1501239847-sr20-drift-build-0110.jpg)
Its getting there slowly...
Thanks mate, bit more to do now
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Lining it up...
![Name: 0105.jpg
Views: 1276
Size: 140.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235260d1501239847-sr20-drift-build-0105.jpg)
Bit more to trim...
![Name: 0106.jpg
Views: 1304
Size: 116.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235261d1501239847-sr20-drift-build-0106.jpg)
Getting the angle right...
![Name: 0107.jpg
Views: 1303
Size: 140.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235262d1501239847-sr20-drift-build-0107.jpg)
Masked up with cardboard and filled with expanding foam...
![Name: 0108.jpg
Views: 1295
Size: 95.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235263d1501239847-sr20-drift-build-0108.jpg)
Should be ready for shaping tomorrow...
![Name: 0109.jpg
Views: 1284
Size: 60.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235264d1501239847-sr20-drift-build-0109.jpg)
And a shot of the new BC Coilovers from Japanese Performance...
![Name: 0110.jpg
Views: 1278
Size: 55.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235265d1501239847-sr20-drift-build-0110.jpg)
![Name: 0111.jpg
Views: 1259
Size: 37.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/235266d1501239847-sr20-drift-build-0111.jpg)
#106
Project Addict
Thread Starter
Ya we'll see how they work next ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Cheers Hutch...
LoL I'll see if I can chop a bit more![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Will have some the weekend Jake![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Arty shot thanks to pedro![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Name: 0112.jpg
Views: 1245
Size: 90.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/234349d1501237788-sr20-drift-build-0112.jpg)
And a sneak peak of what to see later on in the week, should have more updates the weekend :p
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Cheers Hutch...
LoL I'll see if I can chop a bit more
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Will have some the weekend Jake
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Arty shot thanks to pedro
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Name: 0112.jpg
Views: 1245
Size: 90.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/234349d1501237788-sr20-drift-build-0112.jpg)
And a sneak peak of what to see later on in the week, should have more updates the weekend :p
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0113.jpg)
#110
Project Addict
Thread Starter
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I will get stuck back in soon fella
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Hope to have some updates soon but for the latest info on the build you can like my FB page Team Chihuahua :
http://www.facebook.com/teamchihuahua2012
#111
Project Addict
Thread Starter
Just started on the Brides last night, have the mounting plates on the bottom and head bar bolted on now... Wrapped the rear bar in red tape just to freshen it up a bit, should look well in the car ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0114.jpg
Views: 1246
Size: 46.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233630d1501236278-sr20-drift-build-0114.jpg)
![Name: 0115.jpg
Views: 1256
Size: 46.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233631d1501236278-sr20-drift-build-0115.jpg)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0114.jpg
Views: 1246
Size: 46.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233630d1501236278-sr20-drift-build-0114.jpg)
![Name: 0115.jpg
Views: 1256
Size: 46.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233631d1501236278-sr20-drift-build-0115.jpg)
![Name: 0116.jpg
Views: 1238
Size: 43.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233632d1501236278-sr20-drift-build-0116.jpg)
#115
Project Addict
Thread Starter
Thanks mate
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Wiggle](https://www.rx8club.com/images/smilies/wiggle.gif)
The front bumper and sideskirts arrived today from EP Racing, very well wrapped. Looking forward to cutting them up and making it wider
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0117.jpg
Views: 1236
Size: 137.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233533d1501236064-sr20-drift-build-0117.jpg)
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0118.jpg)
![Name: 0119.jpg
Views: 1208
Size: 115.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233534d1501236064-sr20-drift-build-0119.jpg)
![Name: 0120.jpg
Views: 1295
Size: 135.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233535d1501236064-sr20-drift-build-0120.jpg)
#117
this is an amazing project, looking foward for the engine installation parts and stuff like that. Best of luck with this project and btw that hood is amazing, i want that really bad...
#119
Project Addict
Thread Starter
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Bumper came from EP Racing in the UK fella
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#120
Project Addict
Thread Starter
Quick update :
So the engine and gearbox are in, mounts all made up, work has started on the v-mount setup and the pedal box has been fitted. Next up is running the lines and fittings, piping for the intercooler and rad and a few more little touches before the fabrication portion is done...
![Name: 0121.jpg
Views: 1292
Size: 91.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233194d1501235474-sr20-drift-build-0121.jpg)
![Name: 0122.jpg
Views: 1273
Size: 132.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233195d1501235474-sr20-drift-build-0122.jpg)
So the engine and gearbox are in, mounts all made up, work has started on the v-mount setup and the pedal box has been fitted. Next up is running the lines and fittings, piping for the intercooler and rad and a few more little touches before the fabrication portion is done...
![Name: 0121.jpg
Views: 1292
Size: 91.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233194d1501235474-sr20-drift-build-0121.jpg)
![Name: 0122.jpg
Views: 1273
Size: 132.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233195d1501235474-sr20-drift-build-0122.jpg)
![Name: 0123.jpg
Views: 1248
Size: 64.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/233196d1501235474-sr20-drift-build-0123.jpg)
#124
Voids warranties
Quick update :
So the engine and gearbox are in, mounts all made up, work has started on the v-mount setup and the pedal box has been fitted. Next up is running the lines and fittings, piping for the intercooler and rad and a few more little touches before the fabrication portion is done...
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0122.jpg)
So the engine and gearbox are in, mounts all made up, work has started on the v-mount setup and the pedal box has been fitted. Next up is running the lines and fittings, piping for the intercooler and rad and a few more little touches before the fabrication portion is done...
![](http://i628.photobucket.com/albums/uu5/Kruizer_666/SRX8/0122.jpg)