SR20 Drift Build
#203
Project Addict
Thread Starter
Cheers fella...
Thanks mate...
So I free'd up some time to get back to the RX8 today, applied the last 50/50 mix to the passenger rear quarter so now I have a better idea of how it will look from the rear :
![Name: 0223_zps0fac1122.jpg
Views: 1239
Size: 188.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225462d1501217845-sr20-drift-build-0223_zps0fac1122.jpg)
![Name: 0224_zps916396e2.jpg
Views: 807
Size: 198.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225463d1501217845-sr20-drift-build-0224_zps916396e2.jpg)
![Name: 0225_zps06cc70f8.jpg
Views: 771
Size: 156.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225464d1501217845-sr20-drift-build-0225_zps06cc70f8.jpg)
Repaired some damage to the driver wings and gone to working on the top too :
![Name: 0226_zps964241f6.jpg
Views: 742
Size: 164.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225465d1501217845-sr20-drift-build-0226_zps964241f6.jpg)
![Name: 0227_zpsdc94f3d0.jpg
Views: 743
Size: 175.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225466d1501217845-sr20-drift-build-0227_zpsdc94f3d0.jpg)
![Name: 0228_zps4f8642ec.jpg
Views: 735
Size: 175.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225467d1501217845-sr20-drift-build-0228_zps4f8642ec.jpg)
Passenger side is coming along good now too :
![Name: 0229_zps1486218e.jpg
Views: 734
Size: 199.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225468d1501217845-sr20-drift-build-0229_zps1486218e.jpg)
![Name: 0230_zpsd2df5a74.jpg
Views: 735
Size: 179.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225469d1501217845-sr20-drift-build-0230_zpsd2df5a74.jpg)
![Name: 0231_zpsa62618d5.jpg
Views: 747
Size: 200.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225470d1501217845-sr20-drift-build-0231_zpsa62618d5.jpg)
Popped on the sideskirts and I think they will suit the car :
![Name: 0232_zpsdc0de760.jpg
Views: 740
Size: 256.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225471d1501217845-sr20-drift-build-0232_zpsdc0de760.jpg)
![Name: 0233_zps4794881f.jpg
Views: 738
Size: 208.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225472d1501217845-sr20-drift-build-0233_zps4794881f.jpg)
![Name: 0234_zps1d7e2ea0.jpg
Views: 750
Size: 180.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225473d1501217845-sr20-drift-build-0234_zps1d7e2ea0.jpg)
Then decided to throw on the bumper to see the challenge ahead :
![Name: 0235_zpsf4610617.jpg
Views: 749
Size: 210.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225474d1501217845-sr20-drift-build-0235_zpsf4610617.jpg)
![Name: 0236_zps5c12d121.jpg
Views: 748
Size: 176.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225475d1501217845-sr20-drift-build-0236_zps5c12d121.jpg)
***** :
![Name: 0237_zps1a073664.jpg
Views: 737
Size: 155.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225476d1501217845-sr20-drift-build-0237_zps1a073664.jpg)
![Name: 0238_zps2b7c0be5.jpg
Views: 730
Size: 151.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225477d1501217845-sr20-drift-build-0238_zps2b7c0be5.jpg)
Oh well here is where I have decided to cut, will get at it tomorrow, its time for some grub :
![Name: 0239_zpsd35304dd.jpg
Views: 743
Size: 155.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225478d1501217845-sr20-drift-build-0239_zpsd35304dd.jpg)
Thanks mate...
So I free'd up some time to get back to the RX8 today, applied the last 50/50 mix to the passenger rear quarter so now I have a better idea of how it will look from the rear :
![Name: 0223_zps0fac1122.jpg
Views: 1239
Size: 188.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225462d1501217845-sr20-drift-build-0223_zps0fac1122.jpg)
![Name: 0224_zps916396e2.jpg
Views: 807
Size: 198.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225463d1501217845-sr20-drift-build-0224_zps916396e2.jpg)
![Name: 0225_zps06cc70f8.jpg
Views: 771
Size: 156.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225464d1501217845-sr20-drift-build-0225_zps06cc70f8.jpg)
Repaired some damage to the driver wings and gone to working on the top too :
![Name: 0226_zps964241f6.jpg
Views: 742
Size: 164.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225465d1501217845-sr20-drift-build-0226_zps964241f6.jpg)
![Name: 0227_zpsdc94f3d0.jpg
Views: 743
Size: 175.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225466d1501217845-sr20-drift-build-0227_zpsdc94f3d0.jpg)
![Name: 0228_zps4f8642ec.jpg
Views: 735
Size: 175.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225467d1501217845-sr20-drift-build-0228_zps4f8642ec.jpg)
Passenger side is coming along good now too :
![Name: 0229_zps1486218e.jpg
Views: 734
Size: 199.2 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225468d1501217845-sr20-drift-build-0229_zps1486218e.jpg)
![Name: 0230_zpsd2df5a74.jpg
Views: 735
Size: 179.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225469d1501217845-sr20-drift-build-0230_zpsd2df5a74.jpg)
![Name: 0231_zpsa62618d5.jpg
Views: 747
Size: 200.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225470d1501217845-sr20-drift-build-0231_zpsa62618d5.jpg)
Popped on the sideskirts and I think they will suit the car :
![Name: 0232_zpsdc0de760.jpg
Views: 740
Size: 256.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225471d1501217845-sr20-drift-build-0232_zpsdc0de760.jpg)
![Name: 0233_zps4794881f.jpg
Views: 738
Size: 208.5 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225472d1501217845-sr20-drift-build-0233_zps4794881f.jpg)
![Name: 0234_zps1d7e2ea0.jpg
Views: 750
Size: 180.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225473d1501217845-sr20-drift-build-0234_zps1d7e2ea0.jpg)
Then decided to throw on the bumper to see the challenge ahead :
![Name: 0235_zpsf4610617.jpg
Views: 749
Size: 210.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225474d1501217845-sr20-drift-build-0235_zpsf4610617.jpg)
![Name: 0236_zps5c12d121.jpg
Views: 748
Size: 176.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225475d1501217845-sr20-drift-build-0236_zps5c12d121.jpg)
***** :
![Name: 0237_zps1a073664.jpg
Views: 737
Size: 155.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225476d1501217845-sr20-drift-build-0237_zps1a073664.jpg)
![Name: 0238_zps2b7c0be5.jpg
Views: 730
Size: 151.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225477d1501217845-sr20-drift-build-0238_zps2b7c0be5.jpg)
Oh well here is where I have decided to cut, will get at it tomorrow, its time for some grub :
![Name: 0239_zpsd35304dd.jpg
Views: 743
Size: 155.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225478d1501217845-sr20-drift-build-0239_zpsd35304dd.jpg)
![Name: 0240_zps71af5414.jpg
Views: 734
Size: 145.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225479d1501217845-sr20-drift-build-0240_zps71af5414.jpg)
Last edited by Kruizer; 06-18-2013 at 02:12 AM.
#207
Project Addict
Thread Starter
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Cheers fella...
#209
Danny Rotstein
iTrader: (10)
Join Date: Dec 2009
Location: Chicago
Posts: 1,325
Likes: 0
Received 0 Likes
on
0 Posts
Woah. Fenders look amazing. I like what you're doing with the bumper but i can't help but think you could have chose a more aggressive front. I dunno though, could end up awesome. Still super stoked to see the results!
#211
Project Addict
Thread Starter
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#213
Project Addict
Thread Starter
Should be all good in the hood ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Decided to chop the rear bumper today since I had some time, plan is to have it vented like the front wings, join it at the top and the bottom only and I made the exhaust exit a bit wider too. The space on either side of the fog will be cut out and I will be flushing the licence plate recess for a smooth **** on her![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Name: 0245_zps530daa12.jpg
Views: 729
Size: 197.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225440d1501217811-sr20-drift-build-0245_zps530daa12.jpg)
Looks alot cleaner now :
![Name: 0246_zps8ef5e9cb.jpg
Views: 722
Size: 168.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225441d1501217811-sr20-drift-build-0246_zps8ef5e9cb.jpg)
![Name: 0247_zpsd4fbe543.jpg
Views: 754
Size: 177.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225442d1501217811-sr20-drift-build-0247_zpsd4fbe543.jpg)
![Name: 0248_zps8a2fe37b.jpg
Views: 749
Size: 184.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225443d1501217811-sr20-drift-build-0248_zps8a2fe37b.jpg)
The top will be joined and the bottom fang I guess you could call it![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0249_zpse3432f33.jpg
Views: 741
Size: 174.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225444d1501217811-sr20-drift-build-0249_zpse3432f33.jpg)
![Name: 0250_zps1e701db8.jpg
Views: 727
Size: 183.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225445d1501217811-sr20-drift-build-0250_zps1e701db8.jpg)
![Name: 0251_zps996dc3c3.jpg
Views: 735
Size: 174.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225446d1501217811-sr20-drift-build-0251_zps996dc3c3.jpg)
More tomorrow. Just confirm the front of the car is 77" inches wide (6ft 5"inches) and the rear is 78.5" inches wide (6ft 6.5" inches) LoL
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Decided to chop the rear bumper today since I had some time, plan is to have it vented like the front wings, join it at the top and the bottom only and I made the exhaust exit a bit wider too. The space on either side of the fog will be cut out and I will be flushing the licence plate recess for a smooth **** on her
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Name: 0245_zps530daa12.jpg
Views: 729
Size: 197.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225440d1501217811-sr20-drift-build-0245_zps530daa12.jpg)
Looks alot cleaner now :
![Name: 0246_zps8ef5e9cb.jpg
Views: 722
Size: 168.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225441d1501217811-sr20-drift-build-0246_zps8ef5e9cb.jpg)
![Name: 0247_zpsd4fbe543.jpg
Views: 754
Size: 177.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225442d1501217811-sr20-drift-build-0247_zpsd4fbe543.jpg)
![Name: 0248_zps8a2fe37b.jpg
Views: 749
Size: 184.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225443d1501217811-sr20-drift-build-0248_zps8a2fe37b.jpg)
The top will be joined and the bottom fang I guess you could call it
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0249_zpse3432f33.jpg
Views: 741
Size: 174.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225444d1501217811-sr20-drift-build-0249_zpse3432f33.jpg)
![Name: 0250_zps1e701db8.jpg
Views: 727
Size: 183.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225445d1501217811-sr20-drift-build-0250_zps1e701db8.jpg)
![Name: 0251_zps996dc3c3.jpg
Views: 735
Size: 174.3 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/225446d1501217811-sr20-drift-build-0251_zps996dc3c3.jpg)
More tomorrow. Just confirm the front of the car is 77" inches wide (6ft 5"inches) and the rear is 78.5" inches wide (6ft 6.5" inches) LoL
#224
Project Addict
Thread Starter
Ya loads of room, about an 4inches clearance.
They are not, I just cut the crap outta my old bumper![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I'll be leaving vents in the rear bumper alright dude.
You need to use an RX7 rack like myself ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Ya the fronts are easy to appreciate but the rears are something you need to see in person, maybe primer will make it clearer.
LoL
Hardly, more a dope that went chopping a perfectly good car up...
Welcome![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Cheers![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Hmmm I haven't updated the thread in a while, not much has happened but I'll bring you up to speed.
I needed to line up the rear bumper section I cut off, so used some metal from a bonnet I chopped and pop riveted it on to hold the shape.
![Name: 0252_zps8a0c437c.jpg
Views: 775
Size: 158.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224824d1501216061-sr20-drift-build-0252_zps8a0c437c.jpg)
![Name: 0253_zps15de442a.jpg
Views: 749
Size: 95.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224825d1501216061-sr20-drift-build-0253_zps15de442a.jpg)
Caesar invited his bitch over to chill while I did the work of course.
![Name: 0254_zpsbdd4ce41.jpg
Views: 732
Size: 199.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224826d1501216061-sr20-drift-build-0254_zpsbdd4ce41.jpg)
So I had to give the garage a bit of a clean as it was wrecked, threw the car back in and I have to say I felt sorry for her.
![Name: 0255_zps178230d7.jpg
Views: 733
Size: 195.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224827d1501216061-sr20-drift-build-0255_zps178230d7.jpg)
So with a burst of new interest pulled her back out of the garage Monday and got back to some sanding / stripping.
![Name: 0256_zpse998e3e2.jpg
Views: 743
Size: 225.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224828d1501216061-sr20-drift-build-0256_zpse998e3e2.jpg)
![Name: 0257_zps491eaada.jpg
Views: 738
Size: 237.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224829d1501216061-sr20-drift-build-0257_zps491eaada.jpg)
Unfortunately this is the slow part making sure the lines look good and everything fits like it should, removing the wiring from the doors and unnecssary clips. However I have enlisted the help of a mate (panel beater) who will be repairing any of the dents in the doors and priming them. Also we will be finishing the bonnet and wings to get them ready for primer. All of the above should be primed by early next week, then its a case of finishing the bumpers, skirts, spoiler and boot and having them primed. Once all the exterior bits are finished and ready for paint the engine bay and interior will be attacked, this is how the car sits now :
![Name: 0258_zps62f65cfe.jpg
Views: 735
Size: 206.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224830d1501216061-sr20-drift-build-0258_zps62f65cfe.jpg)
More updates to come
They are not, I just cut the crap outta my old bumper
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
LoL
Welcome
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Cheers
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Hmmm I haven't updated the thread in a while, not much has happened but I'll bring you up to speed.
I needed to line up the rear bumper section I cut off, so used some metal from a bonnet I chopped and pop riveted it on to hold the shape.
![Name: 0252_zps8a0c437c.jpg
Views: 775
Size: 158.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224824d1501216061-sr20-drift-build-0252_zps8a0c437c.jpg)
![Name: 0253_zps15de442a.jpg
Views: 749
Size: 95.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224825d1501216061-sr20-drift-build-0253_zps15de442a.jpg)
Caesar invited his bitch over to chill while I did the work of course.
![Name: 0254_zpsbdd4ce41.jpg
Views: 732
Size: 199.8 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224826d1501216061-sr20-drift-build-0254_zpsbdd4ce41.jpg)
So I had to give the garage a bit of a clean as it was wrecked, threw the car back in and I have to say I felt sorry for her.
![Name: 0255_zps178230d7.jpg
Views: 733
Size: 195.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224827d1501216061-sr20-drift-build-0255_zps178230d7.jpg)
So with a burst of new interest pulled her back out of the garage Monday and got back to some sanding / stripping.
![Name: 0256_zpse998e3e2.jpg
Views: 743
Size: 225.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224828d1501216061-sr20-drift-build-0256_zpse998e3e2.jpg)
![Name: 0257_zps491eaada.jpg
Views: 738
Size: 237.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224829d1501216061-sr20-drift-build-0257_zps491eaada.jpg)
Unfortunately this is the slow part making sure the lines look good and everything fits like it should, removing the wiring from the doors and unnecssary clips. However I have enlisted the help of a mate (panel beater) who will be repairing any of the dents in the doors and priming them. Also we will be finishing the bonnet and wings to get them ready for primer. All of the above should be primed by early next week, then its a case of finishing the bumpers, skirts, spoiler and boot and having them primed. Once all the exterior bits are finished and ready for paint the engine bay and interior will be attacked, this is how the car sits now :
![Name: 0258_zps62f65cfe.jpg
Views: 735
Size: 206.6 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224830d1501216061-sr20-drift-build-0258_zps62f65cfe.jpg)
More updates to come
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#225
Project Addict
Thread Starter
So I got a bit more done last week, chopped up the AE86 spoiler a bit more to give a sharper rise at the rear. Then got out the bondo and pop rivets, still more to do but you get the idea.
![Name: 0259_zps4398ad6b.jpg
Views: 748
Size: 134.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224779d1501215984-sr20-drift-build-0259_zps4398ad6b.jpg)
Stipped off the bonnet, wings and 4 doors so I could drop them out to the panel beaters garage, should all be back by the end of the week in primer. He is fixing up the car park dents and this frees me up to focus on the other bits.
![Name: 0260_zps10bd2cf2.jpg
Views: 742
Size: 115.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224780d1501215984-sr20-drift-build-0260_zps10bd2cf2.jpg)
Even the dogs decided to chip in to get **** done, from the left you have Caesar, Nibbles, Phoebe and Romeo hiding in the background.
![Name: 0261_zps667f9f4e.jpg
Views: 729
Size: 197.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224781d1501215984-sr20-drift-build-0261_zps667f9f4e.jpg)
Its mad how far back the engine is and oh ya how bare the car is now![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0262_zps3fb0cd5e.jpg
Views: 811
Size: 256.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224782d1501215984-sr20-drift-build-0262_zps3fb0cd5e.jpg)
![Name: 0263_zpsc3efcd42.jpg
Views: 925
Size: 230.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224783d1501215984-sr20-drift-build-0263_zpsc3efcd42.jpg)
Next up, finishing the boot/spoiler for primer and move onto the engine bay and interior.
![Name: 0259_zps4398ad6b.jpg
Views: 748
Size: 134.0 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224779d1501215984-sr20-drift-build-0259_zps4398ad6b.jpg)
Stipped off the bonnet, wings and 4 doors so I could drop them out to the panel beaters garage, should all be back by the end of the week in primer. He is fixing up the car park dents and this frees me up to focus on the other bits.
![Name: 0260_zps10bd2cf2.jpg
Views: 742
Size: 115.1 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224780d1501215984-sr20-drift-build-0260_zps10bd2cf2.jpg)
Even the dogs decided to chip in to get **** done, from the left you have Caesar, Nibbles, Phoebe and Romeo hiding in the background.
![Name: 0261_zps667f9f4e.jpg
Views: 729
Size: 197.9 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224781d1501215984-sr20-drift-build-0261_zps667f9f4e.jpg)
Its mad how far back the engine is and oh ya how bare the car is now
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Name: 0262_zps3fb0cd5e.jpg
Views: 811
Size: 256.4 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224782d1501215984-sr20-drift-build-0262_zps3fb0cd5e.jpg)
![Name: 0263_zpsc3efcd42.jpg
Views: 925
Size: 230.7 KB](https://www.rx8club.com/attachments/non-rotary-swaps-196/224783d1501215984-sr20-drift-build-0263_zpsc3efcd42.jpg)
Next up, finishing the boot/spoiler for primer and move onto the engine bay and interior.