Cobb Tuning Class In Seattle
#1
Cobb Tuning Class In Seattle
Tuning Your RX8 101
On June 7-8 2014
GoodBox Motorsports
8627 S 212th St
Kent WA 98031
Start time both days 9:00am PDT Check your time zones!
Open to RX8, Mazdaspeed3, Mazdaspeed6, WRX and STI. So tell your friends.
Kane will be offering a Tuning Class in Seattle Washington this coming June.
Just in time for perfect weather.
He will be teaching the basic methods of Cobb tuning along with other EMS styles of tuning live and streaming on the internet.
These will be two eight hour days full of information and insight into tuning and tuning with the Cobb AccessPort.
If you would like to learn about tuning cars, here's your chance.
Day one "Tuning Class" Hands on classroom instruction.
(There wil be a remote link also. So you do not need to be here in person. Details to come.)
Day two "Personalized Tuning" For those people interested in individual tuning of their cars.
Outline of the Class,
Introduction
Training Goals
Gas laws/Tuning Physics
Volumetric Efficiency
Explosions
Engine Basics
Common Modifications
Forced Induction
Injector Math
Compressor Maps
Build vs. Buy
Intro to Tuning EFI
Tuning Math
Planning a Tuning Session
Step by Step Tuning Guide "Tuning the Extras"
Documentation
Practical Exercises
1st Day Class only $200 (including Webinar participants) (limit 12 participants for webinar)
1st and 2nd Day Class $300 Both Days. (limit 4 cars second day, at location)
More info will be added as it becomes available.
Starting a list of whose coming. Kane will PM you for Payment info.
DAY ONE 06/07/2014 (on location participants)
1. bwilk Paid
2. AreAxeAte Paid
3. Ex Fiat Paid
4. tpb7463 Paid
5.
6.
DAY TWO 06/08/2014 (on location participants)
1. bwilk Paid
2. AreAxeAte Paid
3. tpb7463 Paid
4.
WEBINAR ONLY (day one)
1. Carbon8
2. WaitingforFI
3. Hydr0nium Paid
4. shaxk Paid
5. REtali8
6. moRotorMotor Paid
7. po_snake Paid
8. 1.3_LittersOfFurry Paid
9. JB_Rotary Paid
10. JimmyBlack Paid
11.
12.
WEBINAR ONLY (day two)
1. REtali8
2. moRotorMotor Paid
3. po_snake Paid
4.
5.
6.
Please give a firm commitment here now so I can add you to the list.
PLEASE SPECIFY YOUR PARTICIPATION CHOICE IN YOUR POST BELOW
On June 7-8 2014
GoodBox Motorsports
8627 S 212th St
Kent WA 98031
Start time both days 9:00am PDT Check your time zones!
Open to RX8, Mazdaspeed3, Mazdaspeed6, WRX and STI. So tell your friends.
Kane will be offering a Tuning Class in Seattle Washington this coming June.
Just in time for perfect weather.
He will be teaching the basic methods of Cobb tuning along with other EMS styles of tuning live and streaming on the internet.
These will be two eight hour days full of information and insight into tuning and tuning with the Cobb AccessPort.
If you would like to learn about tuning cars, here's your chance.
Day one "Tuning Class" Hands on classroom instruction.
(There wil be a remote link also. So you do not need to be here in person. Details to come.)
Day two "Personalized Tuning" For those people interested in individual tuning of their cars.
Outline of the Class,
Introduction
Training Goals
Gas laws/Tuning Physics
Volumetric Efficiency
Explosions
Engine Basics
Common Modifications
Forced Induction
Injector Math
Compressor Maps
Build vs. Buy
Intro to Tuning EFI
Tuning Math
Planning a Tuning Session
Step by Step Tuning Guide "Tuning the Extras"
Documentation
Practical Exercises
1st Day Class only $200 (including Webinar participants) (limit 12 participants for webinar)
1st and 2nd Day Class $300 Both Days. (limit 4 cars second day, at location)
More info will be added as it becomes available.
Starting a list of whose coming. Kane will PM you for Payment info.
DAY ONE 06/07/2014 (on location participants)
1. bwilk Paid
2. AreAxeAte Paid
3. Ex Fiat Paid
4. tpb7463 Paid
5.
6.
DAY TWO 06/08/2014 (on location participants)
1. bwilk Paid
2. AreAxeAte Paid
3. tpb7463 Paid
4.
WEBINAR ONLY (day one)
1. Carbon8
2. WaitingforFI
3. Hydr0nium Paid
4. shaxk Paid
5. REtali8
6. moRotorMotor Paid
7. po_snake Paid
8. 1.3_LittersOfFurry Paid
9. JB_Rotary Paid
10. JimmyBlack Paid
11.
12.
WEBINAR ONLY (day two)
1. REtali8
2. moRotorMotor Paid
3. po_snake Paid
4.
5.
6.
Please give a firm commitment here now so I can add you to the list.
PLEASE SPECIFY YOUR PARTICIPATION CHOICE IN YOUR POST BELOW
Last edited by Easy_E1; 06-06-2014 at 02:22 PM.
#2
I participated in Kane's previous tuning session hosted by Kma....all I can say is, AMAZING. I learned a ton. Kane basically walked through the entire tuning spectrum. I now have everything down pretty good except timing(my fault, not his. I just can't seem to grasp it) He answered all of my stupid questions and we still managed to move through the class at a decent pace. Anyone who is wanting to learn anything about tuning should definitely take part in the class. It's well worth it
#10
Illudium Q-36 Space Moderator
iTrader: (1)
Both. It will be streamed and I'll try to set up som kind of remote computing / share type dealio. Something like blackboard/adobe connect, but I'll have to do some research.
Looking like 200 for the webinar (Day one only / mostly) and 300 for the those who want to continue and do their specific car on day two. I can do remote as well for the tuning, but I'm going to limit it to 4 cars since that becomes too time consuming.
In person, I think a class of no more than 12. In total, I cannot possibly do more than 14-16 cars at a time, lol. I get confused (that is a lot of logs flying around).
#11
when I say fueling approach I meant some folks spend most of there time on one table
math cal aside, desired fuel aside
a person could
adjust maf scale til they got what they wanted or match the fuel table
adjust VE til they got what they wanted or match the fuel table
or adjust the fuel table to get what they wanted ***** nilly like
I understand there is a bit of finace as you work with them all, but one table holds more weight then another table from person/tuner to person/tuner
what is yours?
mine is VE
math cal aside, desired fuel aside
a person could
adjust maf scale til they got what they wanted or match the fuel table
adjust VE til they got what they wanted or match the fuel table
or adjust the fuel table to get what they wanted ***** nilly like
I understand there is a bit of finace as you work with them all, but one table holds more weight then another table from person/tuner to person/tuner
what is yours?
mine is VE
#13
IC, I guess I am similar accept I just do calibration with the maf, and fuel, then tune with VE, then adjust fuel tables, but I am FI so though similar, as you know the initial setup is much different
#15
How is driveability? I guess since I was tought by Kane I understand his way a little better. I feel as if manipulating VE tables before fuel tables is somewhat chasing your tail. If the math is done right with the MAF and Injector scale the fuel tables should put you within a 3% margin of error. That just leaves fine tuning with the VE table for the anomalies such as the weird lean spot seen around 6200rpm.
#16
Drivability is great!!
I am doing the turbo so My stuff is different. All the out of boost areas are similar to na tuning. but when tuning the top end above 100% load I keep the Maf at realistic values and redo the VE to match the target fuel once I get that then I change the fuel table for power. Having 380gs with .99ve is better then 550gs and .88ve imho
I am doing the turbo so My stuff is different. All the out of boost areas are similar to na tuning. but when tuning the top end above 100% load I keep the Maf at realistic values and redo the VE to match the target fuel once I get that then I change the fuel table for power. Having 380gs with .99ve is better then 550gs and .88ve imho
#21
Yank My Wankel
iTrader: (4)
I will be in Day 1 of the Webinar, I will continue one on one tuning with Kane on his schedule over the summer.
Another quick question tho, maybe Kane can answer. I pre-ordered a 2015 STI, and will have it by then how much of this session will focus on other cars as said in the title. Now I know the 2015 is not supported currently but it will be (Using the same EJ motor and same ECU with an update OE map) and it will be nice to get a beginners inside look into it.
Another quick question tho, maybe Kane can answer. I pre-ordered a 2015 STI, and will have it by then how much of this session will focus on other cars as said in the title. Now I know the 2015 is not supported currently but it will be (Using the same EJ motor and same ECU with an update OE map) and it will be nice to get a beginners inside look into it.