Prince6

How are you every one?
Please I need your help we are just from rebuilding my RX8 but its has refused to start, I bought new coils and new plugs too... what can I do? How can I boost the compression? Or which pips can we use?

Red line envy

Push or pull it to bump start it if its a manual. Worked for me after my build.

Prince6

Okay thanks very much will try that

Prince6

Hope you are fine sir! I wanted to find out we are, what causes hot start or hard start wen its hot after rebuild? And how can I solve it.

Loki

iTrader: (1)

Low compression. What was replaced during the rebuild?

Prince6

We just replaced the apex seals, springs and coolant seals

Loki

iTrader: (1)

Ah.
Not the side seals?
Did you check the housings for flaking or chatter marks?

Sorry man. I think you'll need to rebuild it again, properly. Do it right or do it twice.

Prince6

We checked the rota housing also

strokercharged95gt

Its not uncommon for the compression to be low following a rebuild. I would recharge your battery and keep trying to start it. Good chance you'll pick up some compression during the first 5-10 minutes of run time. I would at least try that before tearing it back apart.