GTSPEC / Hotchkis / Whiteline / Eibach / BC Coilovers
#1
Hotchkis / Whiteline / Eibach / BC Coilovers
04-10 Mazda RX-8 Hotchkis Sport Sway Bars- $360 (PM for Shipping Quote)
--------------------------------------------------------------------------------------------------------
04-10 Mazda RX-8 Whiteline End Links - $148 (PM for Shipping Quote)
04-10 Mazda RX-8 Eibach Pro-Kit - $250 (PM for Shipping Quote)
BR Type Coilovers for 03+ Mazda RX-8 - $999 Shipped ( FREE GTSPEC "BLACK"cooling Radiator Panel with each order )
Hotchkis Tuning Sport sway bars for the 04-10 Mazda RX-8 improve handling by reducing body roll. With Hotchkis lightweight, hollow sway bars on your RX-8 you will be able to turn-in with confidence and take corners more aggressively thanks to Hotchkis's intensive on-track testing. Speed robbing understeer is eliminated allowing power to be applied earlier during corner exit. The Hotchkis RX-8 sway bar set includes front and rear bars, greaseable bushings, and brackets for installation.
* Specs:
* Front: 33mm: 110%, 150%, or 195% stiffer than stock settings.
* Rear: 21mm: 390%, 470%, or 580% stiffer than stock settings.
* Specs:
* Front: 33mm: 110%, 150%, or 195% stiffer than stock settings.
* Rear: 21mm: 390%, 470%, or 580% stiffer than stock settings.
04-10 Mazda RX-8 Whiteline End Links - $148 (PM for Shipping Quote)
Any high performance swaybar kit deserves an upgraded end link assembly that can safely handle sharp curves and aggressive driving both on and off the track. Whiteline performance spherical bearing end links for the RX-8 are the perfect compliment to any swaybar combination. The stock end links can flex and crack over time, especially under high performance and competitive driving conditions. Whiteline spherical bearing end links feature anodized aluminum turn-buckles and fully adjustable stainless steel rod-ends, allowing you to custom tune your suspension setup to maximize handling performance.
Each Whiteline end link kit for the 04-10 Mazda RX-8 includes high tensile hardware replacements, rubberized dust boots for added bearing protection and easy to follow, application specific installation instructions; all features that many competitors cut to save time and production costs. Just one more reason why you can only expect the best in suspension performance from the experts at Whiteline.
Each Whiteline end link kit for the 04-10 Mazda RX-8 includes high tensile hardware replacements, rubberized dust boots for added bearing protection and easy to follow, application specific installation instructions; all features that many competitors cut to save time and production costs. Just one more reason why you can only expect the best in suspension performance from the experts at Whiteline.
Eibach produces some of the highest quality springs in the world. They can be found everywhere from high performance street cars to full race F1 cars. Eibach springs are built from the ground up - starting with full research and development for every application to determine the best balance between performance and ride quality. Eibach springs are on average 2.75 pounds lighter than the competition. This reduction of unsprung mass is equivalent to removing 50 pounds from your car! All Eibach springs come with an unbeatable Million Mile Warranty.
The Eibach Pro-Kit will greatly improve handling with a moderate drop that is perfect for a daily driven car. The reduced wheel gap will make your car look the way it should have come from the factory, and the lower center of gravity dramatically helps in the corners. The Pro-Kit features a progressive spring design for the ultimate mix of comfort and performance.
* Drop:
* Front: -1.2" / Rear: -.8"
The Eibach Pro-Kit will greatly improve handling with a moderate drop that is perfect for a daily driven car. The reduced wheel gap will make your car look the way it should have come from the factory, and the lower center of gravity dramatically helps in the corners. The Pro-Kit features a progressive spring design for the ultimate mix of comfort and performance.
* Drop:
* Front: -1.2" / Rear: -.8"
BR Type Coilovers for 03+ Mazda RX-8 - $999 Shipped ( FREE GTSPEC "BLACK"cooling Radiator Panel with each order )
BR model is perfect for street driving and occasional road course duty. With easily accessible adjustment ***** for fine tuning your compression/rebound and separately adjustable ride height, having a performance coilover system couldn’t be any easier. You choose how low or high you want your vehicle, no preset ride height here, and our patented concave lower locking ring keeps it locked in. All of our systems come with pillowball mounts to provide the most feedback possible from your suspension and to sharpen your steering response. BC’s available front and rear camber plates also allow you to get the perfect alignment setup without compromise. All this while providing a strong, attractive looking coilover system.
- Mono-tube shock design
- 30 levels of damping force adjustment, adjust compression/rebound
- Pillowball mounts and adjustable camber plates included (where applicable)
- Adjustable rear camber plates available
- Separate full length height adjustable
- One year warranty
- Rebuildable
- Mono-tube shock design
- 30 levels of damping force adjustment, adjust compression/rebound
- Pillowball mounts and adjustable camber plates included (where applicable)
- Adjustable rear camber plates available
- Separate full length height adjustable
- One year warranty
- Rebuildable
Last edited by RAVSPEC; 11-18-2010 at 11:34 AM.
Thread
Thread Starter
Forum
Replies
Last Post