Car cover recommendations???
#1
Car cover recommendations???
Does anyone have any suggestions for a good thick car cover? I live in an apartment and don't have a garage. I'm less concerned with keeping the car clean, but very concerned about protecting from hail and other inclement weather conditions.
So, anyone have experience with a nice thick car cover that will still be breathable and not trap in water?
Thanks!
So, anyone have experience with a nice thick car cover that will still be breathable and not trap in water?
Thanks!
#3
Re: Car cover recommendations???
Originally posted by dwntreader
Does anyone have any suggestions for a good thick car cover? I live in an apartment and don't have a garage. I'm less concerned with keeping the car clean, but very concerned about protecting from hail and other inclement weather conditions.
So, anyone have experience with a nice thick car cover that will still be breathable and not trap in water?
Thanks!
Does anyone have any suggestions for a good thick car cover? I live in an apartment and don't have a garage. I'm less concerned with keeping the car clean, but very concerned about protecting from hail and other inclement weather conditions.
So, anyone have experience with a nice thick car cover that will still be breathable and not trap in water?
Thanks!
http://216.60.144.111/ecatcust/getx....&vid=902912890
pick a color. i got grey evolution. took about 2 weeks to get but worth it.
beers
#4
I have the Evolution also which does offer some dent protection but is not as soft as the Noah. The only thing I don't like is that it is a very tight fit. I know this is probably done so it does not blow off the car when it is windy but I think this could cause some swirls or scratches if any grit which is common on the car cover areas near the wheels rubs against the paint when pulling the cover down. Because mine is stored in the garage and the cover is just for ding protection I would prefer a looser fit.
#5
As noted, covers made from Noah or Evolution fabrics are your best bet. A very good source for covers and information is:
www.bigskycarcover.com
www.bigskycarcover.com
#6
dwntreader -- I've been thinking about this myself. I have a Weathershield cover now, which is brilliantly weatherproof (not a drop of water gets through) and can be cleaned in my home washer and dryer. Unfortunately, it is also very thin and light, with no dent protection whatsoever. I've been leaning toward an Evolution IV cover for the summer months -- the fabric is thick, but they're hard to clean.
flatso -- Is your Evolution IV cover elasticized around the bottom? I park my car outside, so a tight fit is something I'm looking for. I had an Evolution cover years ago, and it had elastic only around the front and rear bumpers -- the sides flopped around a lot in the wind. Maybe they've re-engineered them since.
flatso -- Is your Evolution IV cover elasticized around the bottom? I park my car outside, so a tight fit is something I'm looking for. I had an Evolution cover years ago, and it had elastic only around the front and rear bumpers -- the sides flopped around a lot in the wind. Maybe they've re-engineered them since.
#7
just around the front and rear bumper
by the way here is the best prices I have found for covers and includes free shipping.
by the way here is the best prices I have found for covers and includes free shipping.
#9
The car cover by Budge (Budge Light size B-3) is a perfect light weight cover for INSIDE storage, only $19.95 at Walmart. It fits loosely enough not to cause scratches, elasticized front and rear and reaches just a few inches above the floor. I bought it to keep our cat from messing up the finish. It also helps protect from minor nicks in the garage and keeps the dust off.
#12
My advice is a little different - I'd consider skipping the cover altogether - personally I regard covers as appropriate for long term enclosed storage only to keep the dust down - outside they can be a hassle. In my experience most people get tired of the on/off drill sooner or later. It gets worse when it's wet or windy and dusty can get trapped underneath and be abrasive between the finish and cover depending on the environment. My $0.02
#13
Originally posted by pgtr
My advice is a little different - I'd consider skipping the cover altogether - personally I regard covers as appropriate for long term enclosed storage only to keep the dust down - outside they can be a hassle. In my experience most people get tired of the on/off drill sooner or later. It gets worse when it's wet or windy and dusty can get trapped underneath and be abrasive between the finish and cover depending on the environment. My $0.02
My advice is a little different - I'd consider skipping the cover altogether - personally I regard covers as appropriate for long term enclosed storage only to keep the dust down - outside they can be a hassle. In my experience most people get tired of the on/off drill sooner or later. It gets worse when it's wet or windy and dusty can get trapped underneath and be abrasive between the finish and cover depending on the environment. My $0.02
I would agree with you until the day I saw Mr Cat jumping all over my warm hood with his nice sharp claws. That is why I would use a cover if my car was outside.
#14
Originally posted by pgtr
My advice is a little different - I'd consider skipping the cover altogether - personally I regard covers as appropriate for long term enclosed storage only to keep the dust down - outside they can be a hassle. In my experience most people get tired of the on/off drill sooner or later. It gets worse when it's wet or windy and dusty can get trapped underneath and be abrasive between the finish and cover depending on the environment. My $0.02
My advice is a little different - I'd consider skipping the cover altogether - personally I regard covers as appropriate for long term enclosed storage only to keep the dust down - outside they can be a hassle. In my experience most people get tired of the on/off drill sooner or later. It gets worse when it's wet or windy and dusty can get trapped underneath and be abrasive between the finish and cover depending on the environment. My $0.02
Again, thanks for the advice and input!
Thread
Thread Starter
Forum
Replies
Last Post
akagc
RX-8's For Sale/Wanted
7
08-11-2015 08:07 PM
LakeStreet
RX-8 Parts For Sale/Wanted
0
07-17-2015 09:58 AM