Notices
RX-8 Discussion General discussion about the RX-8 that doesn't fit in one of the specialty forums.
Sponsored by:
Sponsored by: CARiD

Dealership talk

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-16-2011 | 05:11 PM
  #1  
pasngr46n2's Avatar
Thread Starter
I am a meat popsicle
 
Joined: Mar 2011
Posts: 17
Likes: 0
From: Beachwood, NJ
NJ Dealership talk

So.....my baby won't start. I assumed she was flooded but the folks couldn't get it started using the "de-flooding" procedures i sent them and I'm overseas right now so i can't do anything. I sure don't want to spend any of the limited time i have back home tryna get my car started. I've still got lots to learn bout y car so I got her towed to a dealership. Below is what they've told me so far. I think the part that frightens me the most is the "This is where we need to START" line. Yer toughts please. I know what the compression test is but what the hell is an upper engine decarb/clean?

Walter,

First thing first we need to put a battery in the vehicle, put fuel in the vehicle, perform an upper engine decarb and perform a compression test. The battery is $159 installed, upper engine clean w/compression test $259.95 and I'll put $20 of premium in the car. This is where we need to start, let me know.

Old 05-16-2011 | 05:18 PM
  #2  
RX8Soldier's Avatar
Time for boost...
iTrader: (24)
 
Joined: Jun 2010
Posts: 5,414
Likes: 15
From: Canada
and that's how stealerships work...

First, see if you can get someone you know to check the plugs and coils. They may be damaged. Your starter may be weak and faulty. Check that as well. While they're at it, they can pick up the battery and install it.
If you MUST use the stealership, then all this maintenance will cost you.

What the dealer is saying is that they want to do a compression test for you. In order to do that, they have to do a decarbonization (Is that a word??) of the engine (basically, they inject stuff into the intake manifold to clean out the carbon). Then they run the test.
Old 05-16-2011 | 05:32 PM
  #3  
CrazyJek's Avatar
"I wanna go fast!"
 
Joined: Jul 2008
Posts: 330
Likes: 1
From: East Fishkill NY
Spray starter fluid into the intake. It will stink and blow smoke for several minutes.

If that dont do it then follow step one with checking plugs, coils, starter.

If not... decarbonize.

Compression...

etc...


Good luck and god speed.
Old 05-16-2011 | 07:41 PM
  #4  
nycgps's Avatar
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 32
From: Planet Earth
Battery, use this with Coupon code BIG35 , select pick up in store, they will install it for you for free

http://shop.advanceautoparts.com/web...1729475764____

wtf they mean upper engine clean, I assume they meant Zoom Zoom cleaning. pay me 50 bux I do it for your car (when you're back and goes NYC), come to our Thursday night meet and I'll do it for you on the spot, but takes at least an hour, keep that in mind.

Compression test I will soon have tester to test it, same one that Popular Japanese tuners like Knights Sports, Fujita Engineering, etc use. and I'm thinking of 25 bux each test. this will give you an idea what to expect at the stealership.at least its better than paying them an hour of labor (which is at least 100) for 15 minutes of work, and end up "oh you passed"

Last edited by nycgps; 05-16-2011 at 07:49 PM.
Old 05-16-2011 | 08:15 PM
  #5  
expo1's Avatar
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
Originally Posted by pasngr46n2

First thing first we need to put a battery in the vehicle, put fuel in the vehicle, perform an upper engine decarb and perform a compression test. The battery is $159 installed, upper engine clean w/compression test $259.95 and I'll put $20 of premium in the car. This is where we need to start, let me know.

To be honest that isn't a bad quote for the work they want to do.

Is that from Lester Glen Mazda on 37? Or Weisleder in Brick? If it's Lester Glen I would avoid them . That used to be Toms River Mazda and I wasn't surprised when they went out of business. That location was closed for a while and Lester Glen purchased the rights and re-opened it. They don't have much history selling or working on RX-8's. Most likely your going to get a tech from their other lots that took the RX-8 certification.
If your dealing with Weisleder I have had good dealings with them and met their RX-8 tech and like him.
Old 05-16-2011 | 10:22 PM
  #6  
pasngr46n2's Avatar
Thread Starter
I am a meat popsicle
 
Joined: Mar 2011
Posts: 17
Likes: 0
From: Beachwood, NJ
Originally Posted by expo1
To be honest that isn't a bad quote for the work they want to do.

Is that from Lester Glen Mazda on 37? Or Weisleder in Brick? If it's Lester Glen I would avoid them . That used to be Toms River Mazda and I wasn't surprised when they went out of business. That location was closed for a while and Lester Glen purchased the rights and re-opened it. They don't have much history selling or working on RX-8's. Most likely your going to get a tech from their other lots that took the RX-8 certification.
If your dealing with Weisleder I have had good dealings with them and met their RX-8 tech and like him.
This is with Lester Glen. I actually bought the car there when it was Toms River Mazda(still got that god awful sticker on my bumber). This is prolly the last time I'll go with a dealer. I just didn't know any good rotary mechanics in the area and I'm super pressed for time. I'm coming home in 8 days now and I need my gal up and running. I can see already I'm gonna pay he price. They gave me q quote for a tune-up. $1000. Thanx fer the info.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 04:53 PM
R3Dream
New Member Forum
9
03-07-2019 10:11 AM
R3Dream
Series II Technical and Trouble shooting
48
03-12-2016 02:44 PM
SimonT182
RX-8 Parts For Sale/Wanted
4
10-02-2015 11:33 AM
archon
RX-8 Parts For Sale/Wanted
3
10-01-2015 07:08 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Dealership talk



All times are GMT -5. The time now is 01:00 PM.