Help!!!!!!!!!!!!!!!!!!!
#1
Registered User
Thread Starter
Join Date: Dec 2008
Location: Denver
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
![Exclamation](https://www.rx8club.com/images/icons/icon4.gif)
okay so im changing my parking lights to led and i lost a damn bulb in the housing. question is.. ifi use a magnet will it mess anything in the led or will it be fine? second... how the hell do you reinstall the passenger side??
#2
Yeah Sioux Sioux!!!
iTrader: (2)
Join Date: Feb 2009
Location: Dickinson, North Dakota
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
Ooo, i warned you. It is really hard to get it in especially if you have bigger hands/fingers but you just have to work with very little room, and getting it out of the housing after it has fallen in there is extremely difficult from what i have heard, so i guess good luck and let us know if you can get it out.
#3
Registered User
Thread Starter
Join Date: Dec 2008
Location: Denver
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
OMFG!!! so i lost the one on the drivers side so i was like w.e ill just do the passenger side. i taped that one up put it in. then after 2 hours, i finally got the bulb out that i lost on the drivers side. taped that one up put it in.. turned on lights to see if it was working... drivers one works now the Fing passenger one fell out. question now is how do you take out the whole light housing thing cause the esu is a bitch and i cant see what the hell im doing. so i think it would be easy if i just took off the lights.
#4
SARX
iTrader: (2)
OMFG!!! so i lost the one on the drivers side so i was like w.e ill just do the passenger side. i taped that one up put it in. then after 2 hours, i finally got the bulb out that i lost on the drivers side. taped that one up put it in.. turned on lights to see if it was working... drivers one works now the Fing passenger one fell out. question now is how do you take out the whole light housing thing cause the esu is a bitch and i cant see what the hell im doing. so i think it would be easy if i just took off the lights.
#11
Daddy's Home...
iTrader: (2)
Join Date: Oct 2008
Location: sevenONEfour
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
gl with that! i made the same mistake you did...i had to remove the actual headlight to get the bulb out. i think thats the easiest way to go...removing the front bumper really isn't that hard .
#12
Registered User
Thread Starter
Join Date: Dec 2008
Location: Denver
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
well i found the easiest way to take out the bulb w/o taking off the bumper is to get a wire long enough for it to get inside the housing, and tape a sewing thread on it... its like going fishing, but for a bulb lol