Notices
RX-8 Discussion General discussion about the RX-8 that doesn't fit in one of the specialty forums.
Sponsored by:
Sponsored by: CARiD

help? ideas needed please

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-31-2010 | 06:11 PM
  #1  
georgemagana's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 175
Likes: 0
From: Calgary, Canada
Smile my sparkplugs experience with lots of picture( problems and some solutions included )

this may be a stupid but i need some ideas. My friends and me tried to change the sparkplugs on my 8 yesterday taking the wheel off and working from the side, we tried to the get the spark plugs out with no result and we also didnt have enough room to work so we decided to work on it next weekend jacking the car up BUT last night when i drove to work my car had a really hard start and did a "funny" noise and it seems like the car didntt have much power either when driving from a stop . So im guessing that when trying to get the spark plug out we broke something some how and that my car is missfiring or something like that any ideas? because i really dont wanna taker my car into the dealer.

Thanks in advance

Last edited by georgemagana; 11-01-2010 at 07:43 PM.
Old 10-31-2010 | 06:20 PM
  #2  
jasonrxeight's Avatar
Registered
 
Joined: Jan 2010
Posts: 3,487
Likes: 3
From: Omaha, NE
you need some extension and a wobble head to get in there.
probably a loose wire? make sure everything is tight.
could it be you broke a electrode inside?
Old 10-31-2010 | 06:21 PM
  #3  
av8tionmec's Avatar
Registered
iTrader: (2)
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: Savannah, GA
You might have broke a plug trying to get them out. Change the plugs, and check to make sure you have the right wires going to the right plugs.
Old 10-31-2010 | 11:58 PM
  #4  
georgemagana's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 175
Likes: 0
From: Calgary, Canada
Originally Posted by jasonrxeight
you need some extension and a wobble head to get in there.
probably a loose wire? make sure everything is tight.
could it be you broke a electrode inside?
"You might have broke a plug trying to get them out. Change the plugs, and check to make sure you have the right wires going to the right plugs."


thanks for the hel guys! my friend and me tried again wwe changed the 4 sparkplugs and wow it feels like a new car and you were both right the coil was loose and the sparkplug had a pretty big crack. Im almost 100% sure the sparkplugs were never changed before ( i bought the car about 4 months ago ) because they were destroyed lol im gonna upload pictures tomorrow so everyone can they a look at my old sparkplugs thanks a lot guys
Old 11-01-2010 | 12:19 AM
  #5  
nycgps's Avatar
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 32
From: Planet Earth
if thats the case, might be a good time to change the coils too.
Old 11-01-2010 | 07:46 PM
  #6  
georgemagana's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 175
Likes: 0
From: Calgary, Canada
some pictures of the whole process ! lots of fun
Attached Thumbnails help? ideas needed please-img00432-20101031-1800.jpg   help? ideas needed please-img00435-20101031-1800.jpg   help? ideas needed please-img00434-20101031-1800.jpg   help? ideas needed please-img00439-20101031-1817.jpg   help? ideas needed please-img00441-20101031-1825.jpg  

Old 11-01-2010 | 07:48 PM
  #7  
georgemagana's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 175
Likes: 0
From: Calgary, Canada
more pics! and yea the coils will be my next project hopefully before winter gets really bad
Attached Thumbnails help? ideas needed please-img00442-20101031-1827.jpg   help? ideas needed please-img00444-20101031-1833.jpg   help? ideas needed please-img00446-20101031-2152.jpg   help? ideas needed please-img00447-20101031-2153.jpg  

Last edited by georgemagana; 11-01-2010 at 07:51 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JakeKaminskisRacing
New Member Forum
13
08-23-2015 02:10 AM
MolecularConcept
New Member Forum
8
08-09-2015 05:46 AM
MarkX
New Member Forum
3
07-31-2015 08:50 AM
MolecularConcept
New Member Forum
7
07-26-2015 10:09 PM
04MazdaMan
Series I Interior, Audio, and Electronics
1
07-15-2015 09:23 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: help? ideas needed please



All times are GMT -5. The time now is 10:16 AM.