Notices
RX-8 Discussion General discussion about the RX-8 that doesn't fit in one of the specialty forums.
Sponsored by:
Sponsored by: CARiD

Mazdaspeed RX8's

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-02-2006 | 07:38 PM
  #51  
gxyooj's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 18
Likes: 0
Originally Posted by murix
Mazda Presents Limited-Production 'Mazda RX-8 Mazdaspeed Version'

Mazda Motor Corporation announces the release of a limited edition RX-8 Mazdaspeed Version, which is based on the RX-8 and fitted with Mazdaspeed* brand tune-up parts for enhanced sports driving performance. The RX-8 Mazdaspeed Version goes on sale from the middle of February at Mazda Anfini and Mazda dealerships throughout Japan.

The new RX-8 Mazdaspeed Version is based on the RX-8 Type S. Mazda has tuned up the engine using it's exclusively designed PCM (Powertrain Control Module) to match the modified intake and exhaust systems of the Mazdaspeed Version, as well as going through balance adjustments around the eccentric shaft in response to the lightweight flywheel. Mazda has also tuned up the suspension and fitted aero parts to further enhance sports driving performance. Those modifications, carried out under Mazda's strict quality control system, provide the RX-8 Mazdaspeed Version with well-balanced performance.

In addition, the RENESIS rotary engine has been further improved to deliver greater aerodynamic performance and even better sports car driving performance. Sharp, stable maneuverability is further enhanced while maintaining ride comfort, and the vehicle's exterior design supervised by the RX-8 chief designer expresses high performance.

The sales volume of the RX-8 Mazdaspeed Version will be limited to 300 units.
clearly RHD
Old 10-02-2006 | 07:40 PM
  #52  
murix's Avatar
Registered
 
Joined: Aug 2003
Posts: 740
Likes: 0
From: La La Land
Originally Posted by gxyooj

It's a forum however I expected this "OMG HE DON'T KNOW ****" type of treatment. who cares.

I like your attitude to the internet where everyone is a hero.
Old 10-02-2006 | 08:00 PM
  #53  
Vash137's Avatar
Registered
 
Joined: Jul 2006
Posts: 119
Likes: 0
From: Pembroke, MA
Believe it or not, there is a mazda dealer down in Palm Beach, FL that was selling a Mazdaspeed RX-8 as well. It was the normal winning blue color with a mazdaspeed full bodykit, flywheel, suspension, wheels...etc...you know the rest. But it also had custom blue/black two tone leather done by a local leather shop. I don't remember the sticker price, but I do remember it being quite a bit higher than a run of the mill RX-8, at least $5k extra. So some dealers are trying to sell off "mazdaspeed rx-8s" for some extra cash.
Old 10-02-2006 | 08:06 PM
  #54  
NoTears316's Avatar
Shock and Awe
 
Joined: Oct 2004
Posts: 3,871
Likes: 4
From: North Carolina
Originally Posted by gxyooj
My uncle paid 36k. 6k miles on odometer. a little over a year old.

I'll have to ask him about the actual "sticker".

36k for an 04?!!! Where do you live? I'm selling mine there!
Old 10-02-2006 | 08:14 PM
  #55  
dillsrotary's Avatar
jersey fresh
 
Joined: Dec 2005
Posts: 3,688
Likes: 0
From: Boston, MA
Originally Posted by gxyooj
I figured RX8 board members would know.

Just based on my first thread on this forum everyone seems to act like they are GURU's or something.

How friendly.....
you may find this hard to believe but we on the board know everything about everything, you can ask just about any question about anything and someone will have the correct answer. GOOGLE is no match for us.

Also as for "gurus" you had an answer to your question by the 8th post.
Old 10-02-2006 | 08:24 PM
  #56  
Aipex8's Avatar
X e p i A
iTrader: (1)
 
Joined: Feb 2006
Posts: 2,015
Likes: 5
From: Vancouver, WA
Is this the car?



I've seen this car in a couple of different places (magazines, websites) and if I remember correctly, it was a one-off demo car that was just built up with all of the Mazdaspeed add-on parts.

Also, this car is built off of a sport model, as it has cloth seats + a DSC OFF switch. $36 seems a little high, but I imagine if you bought an 05 model with 6k on it today and had the dealership add all the Mazdaspeed parts to it, you'd end up paying close to that.

Last edited by Aipex8; 10-02-2006 at 08:34 PM.
Old 10-02-2006 | 09:41 PM
  #57  
Mazdaspeed RX8 ver2's Avatar
Registered
 
Joined: Sep 2005
Posts: 2,373
Likes: 51
From: Hayward, CA
wow..... this thread is fun to read.....

Lets put all the chips on the table...

NO MAZDASPEED RX8'S WHERE EVER IMPORTED INTO THE UNITED STATES!

YOU CAN ONLY GET ACCESSORIES HERE IN THE UNITED STATES.
But heres the thing, there are only springs, shocks, strut bars, sway bars, interior accents, exterior body kit with spoiler, rims, intake, exhaust and flywheel available in the United States.

In Japan, the real mazdaspeed rx8's are actually the base model rx8 type s with all those plus more, for example, the Mazdaspeed RX8 Ver2 includes fresh air ducts, high preformance spark plugs, mazdaspeed PCM, closer gear ratios with a higher final gear. The reason they use the base model is because for lighter weight. Also, the mazdaspeed 8 has mazdaspeed racing seats, and now they have roll cages, also they have the mazdaspeed defi guages. Oh yeah, forgot to add they JDM mazdaspeed rx8 has a better looking b-pillar than the red one shown below. The "mazdaspeed" words are smaller and just on the bottom of the garnish.
Old 10-02-2006 | 09:50 PM
  #58  
lesper4's Avatar
T-29 years and counting
iTrader: (3)
 
Joined: Apr 2005
Posts: 3,062
Likes: 0
From: North Fontana, CA.
Out of all the information provided you should have understand the awnser to your question and then some. Yeah he paid too much and no there arent any here. It is a funny thread to read about but sadley I hope it ends soon.
Old 10-02-2006 | 09:53 PM
  #59  
Mazdaspeed RX8 ver2's Avatar
Registered
 
Joined: Sep 2005
Posts: 2,373
Likes: 51
From: Hayward, CA
Originally Posted by lesper4
Out of all the information provided you should have understand the awnser to your question and then some. Yeah he paid too much and no there arent any here. It is a funny thread to read about but sadley I hope it ends soon.
Old 10-02-2006 | 09:55 PM
  #60  
SmokeyTheBalrog's Avatar
Thread Pirate, Ahhrrrrr
 
Joined: Aug 2006
Posts: 784
Likes: 0
From: Long Island, NY
Hey gxyooj,
You paid 36k for a used Rx-8?

I'm sorry to say I think you got ripped off.

If they have a list of after market parts they put on then maybe we can give you an idea by how much.
Old 10-02-2006 | 10:02 PM
  #61  
murix's Avatar
Registered
 
Joined: Aug 2003
Posts: 740
Likes: 0
From: La La Land
Originally Posted by Mazdaspeed RX8 ver2
wow..... this thread is fun to read.....

Lets put all the chips on the table...

NO MAZDASPEED RX8'S WHERE EVER IMPORTED INTO THE UNITED STATES!

YOU CAN ONLY GET ACCESSORIES HERE IN THE UNITED STATES.
But heres the thing, there are only springs, shocks, strut bars, sway bars, interior accents, exterior body kit with spoiler, rims, intake, exhaust and flywheel available in the United States.

In Japan, the real mazdaspeed rx8's are actually the base model rx8 type s with all those plus more, for example, the Mazdaspeed RX8 Ver2 includes fresh air ducts, high preformance spark plugs, mazdaspeed PCM, closer gear ratios with a higher final gear. The reason they use the base model is because for lighter weight. Also, the mazdaspeed 8 has mazdaspeed racing seats, and now they have roll cages, also they have the mazdaspeed defi guages. Oh yeah, forgot to add they JDM mazdaspeed rx8 has a better looking b-pillar than the red one shown below. The "mazdaspeed" words are smaller and just on the bottom of the garnish.

There is a NR-A version which has a roll cage and race seats. The MS has stock seats, wheels, and no cage. No gauges either. Not everything MS comes on the MS 8. The version I sold 300. Version II sold 180 and had an upgrade to the new adjustable suspension. Stock gears as far as I am aware of.

Last edited by murix; 10-02-2006 at 10:07 PM.
Old 10-02-2006 | 10:03 PM
  #62  
Mazdaspeed RX8 ver2's Avatar
Registered
 
Joined: Sep 2005
Posts: 2,373
Likes: 51
From: Hayward, CA
Originally Posted by SmokeyTheBalrog
Hey gxyooj,
You paid 36k for a used Rx-8?

I'm sorry to say I think you got ripped off.

If they have a list of after market parts they put on then maybe we can give you an idea by how much.
foreals... but it depends, the whole kit itself is around $2900+ (front bumper, side skirts, rear diffuser, and spoiler), rims by itself for 4 (just for aluminum ms rims) is about $1600, the Forged Mag rims are about $4500 (just for the rims), flywheel goes about $500 from dealership, exhaust and cold air intake (though the mazdaspeed's dont come with the cold air) will be about $7-800, springs and shocks run about $600+, sway bars (front and rear) run about $300+, the strut bars (front and rear) run about $300+, the Mazdaspeed guages run about $1000+, B-pillars run about $120+, the interior trim all together run about $300+ i beleive. All the prices here are brought to you by memory and me be a little off. Who wants to do the math on how much these would cost together, and you can choose which rims to put on the 8. also, add the prices to a base 6-speed rx8 and add a little extra money for the labor work or dealership prices. All you have to do is ask the dealership for each part and its MSRP and add what the dealer gives you. You know those prices from the dealership are ridiculous.
Old 10-02-2006 | 10:04 PM
  #63  
Mazdaspeed RX8 ver2's Avatar
Registered
 
Joined: Sep 2005
Posts: 2,373
Likes: 51
From: Hayward, CA
Originally Posted by murix
That is the NR-A you are describing, which is a racing upgrade.
the upgrades also came stock on Mazdaspeed RX8 Ver2 from japan. I beleive there are only a few hundred of those that where released in Japan.
Old 10-02-2006 | 10:08 PM
  #64  
murix's Avatar
Registered
 
Joined: Aug 2003
Posts: 740
Likes: 0
From: La La Land
Nope.

http://rotarynews.com/node/view/428
Old 10-02-2006 | 10:25 PM
  #65  
Mazdaspeed RX8 ver2's Avatar
Registered
 
Joined: Sep 2005
Posts: 2,373
Likes: 51
From: Hayward, CA
Originally Posted by murix
haha, i didnt read what you meant until now, wrong info, no roll cages for the mazdaspeed production model. hmm, im going to see if i can get a hold of some version 2 suspension parts. anyways i know the version 1 had a longer final gear and shorter gear ratios. The version 2 on the other hand i know has a longer final gear. also, though, the version 1 came with the rims and racing seats and also the ms mirrors, the version 2 doesnt come with the mirrors, rims and racing seats. i didnt fully state that, sorry.

thanks for the little info on the roll cage. i just knew they sold it, i wrongfuly assumed it was on the production models.

thanks murix for pointing those out to me
Old 10-03-2006 | 01:54 AM
  #66  
murix's Avatar
Registered
 
Joined: Aug 2003
Posts: 740
Likes: 0
From: La La Land
Saying that, it sucks Japans gets a full racing model and we get interior updates.
Old 10-03-2006 | 11:47 AM
  #67  
RENESIS_NEENJA's Avatar
Blackbelt Thread Hijacker
 
Joined: Nov 2004
Posts: 549
Likes: 0
From: Dallas, Texas!
Lol. This Thread is awesome.
Old 10-03-2006 | 02:07 PM
  #68  
BlueRenesis82's Avatar
Registered Tracker
 
Joined: Feb 2004
Posts: 3,295
Likes: 0
From: Chicago
Originally Posted by RENESIS_NEENJA
Lol. This Thread is awesome.
good to see that somebody finally gets the humor
Old 10-03-2006 | 02:15 PM
  #69  
8at18's Avatar
8at18
 
Joined: Dec 2005
Posts: 51
Likes: 0
From: Monroe, Mi
dude seriouly I hate your uncle because I was going to buy that exact car and he got to the guys house an hour before me. I know a lot about the car because I actually took a ride in the car and the guy who was selling it told me about it. No it is not a Mazda Speed Rx-8 but it has every single available part that mazda speed offers exept any engine mods. When he bought it, North of Detroit the car had a big crack across the windsheild right. Your Uncle almost made me cry when he bought it I wanted it soooooooooooo bad.
Old 10-03-2006 | 02:16 PM
  #70  
BlueRenesis82's Avatar
Registered Tracker
 
Joined: Feb 2004
Posts: 3,295
Likes: 0
From: Chicago
This thread delivers!
Old 10-03-2006 | 02:23 PM
  #71  
NoTears316's Avatar
Shock and Awe
 
Joined: Oct 2004
Posts: 3,871
Likes: 4
From: North Carolina
Originally Posted by 8at18
dude seriouly I hate your uncle because I was going to buy that exact car and he got to the guys house an hour before me. I know a lot about the car because I actually took a ride in the car and the guy who was selling it told me about it. No it is not a Mazda Speed Rx-8 but it has every single available part that mazda speed offers exept any engine mods. When he bought it, North of Detroit the car had a big crack across the windsheild right. Your Uncle almost made me cry when he bought it I wanted it soooooooooooo bad.
Dont be too upset, I'll sell you mine for $36k! 2004 VR "Mazdaspeed" (snicker), even comes with a 75 shot of nitrous! How can you pass on such a deal?

You can see it here...
https://www.rx8club.com/vbgarage.php?do=view&id=13961
Old 10-03-2006 | 02:25 PM
  #72  
8at18's Avatar
8at18
 
Joined: Dec 2005
Posts: 51
Likes: 0
From: Monroe, Mi
oh yea and your uncle is a liar he didn't pay 36k he paid at most $24,000 and he had trouble getting that money. The guy said that he had trouble getting financing so call him out on it. He's trying to make it look like hes loaded. The car was "worth" 36,000 with all of the parts that it had on it but I know he didn't pay that. It actually had $13,000 of ms parts.
Old 10-03-2006 | 02:55 PM
  #73  
CarAndDriver's Avatar
2005 Black RX-8 GT 6M
 
Joined: Jul 2006
Posts: 6,350
Likes: 0
From: San Jose Area
I'm so glad I got in on the action early.
Old 10-03-2006 | 02:59 PM
  #74  
Mazdaspeed RX8 ver2's Avatar
Registered
 
Joined: Sep 2005
Posts: 2,373
Likes: 51
From: Hayward, CA
Originally Posted by CarAndDriver
I'm so glad I got in on the action early.
haha, look at this guy right here... well, new info for japan mazdaspeed rx8's, your able to get the roll cage added to the package on the mazdaspeed rx8's. But yeah, your uncle just has every little mazdaspeed part available from the dealership, im currently in the process of trying to get the mazdaspeed rx8 ver2 adjustable springs and shock, final gear (thinking about the closer gear ratios) and guages... the rims are awesome but they're not compatible with tmps so i found rays rims that are and i'll just powder coat them and then slap on a nice looking mazdaspeed sticker. haha
Old 10-03-2006 | 03:01 PM
  #75  
NoTears316's Avatar
Shock and Awe
 
Joined: Oct 2004
Posts: 3,871
Likes: 4
From: North Carolina
So... still want to buy my 8?


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 01:21 AM.