My Starter appears to be broken :(
#26
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
got it started. turned the key and i heard the starter spool up. the drive gear didn't make contact with the flywheel. i turned the key again and then again one more time before the starter had a chance to come to a complete stop and it started. it's been starting easily for 2 days now. i don't get it.
#27
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
well, it's acting up again. wouldn't start. had to have it towed. gonna pick up a voltmeter and make sure the solenoid's getting power. the last time i bench-tested the solenoid, it worked and pushed the gear over. but once i put the starter back on the car it would work but then sometimes not. now, not at all. i may need you to cannibalize that extra old starter of yours. i really don't want to have to buy the upgraded starter.
#29
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
yeah, i know the starter motor is running because i can hear the gears.
#30
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
ok, removed the starter. the car is in gear. is it a bad sign if i can stick my finger through the hole and spin the ring gear on the flywheel? i think i might have alot of work to do.
#32
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Guess I didn't need to send out that solenoid today ![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Yeah... I've seen the gear ring pop-off the flywheel... not good:
Attachment 154859 Attachment 154860
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Yeah... I've seen the gear ring pop-off the flywheel... not good:
Attachment 154859 Attachment 154860
#34
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
the only other thing i can see in there is not turning when i spin the gear. how many bolts hold the gear on the flywheel? there's definitely no bolts or sheered bolts or shrapnel in the bottom of the case.
#37
Grasshopper
iTrader: (1)
Replace flywheel.
The only time I've seen that gear ring pop off (the pics above) is when the clutch failed.
Or should I say, the person allowed the disc to wear down to the rivets and and disc material just flew everywhere.
It was a bad sign when I removed the starter and a lump of "fur" jumped out at me.
Anyway... not saying your clutch disc/pressure plate is also bad because you would have noticed this days prior to this occurring, but just be aware that since you're dropping the tranny, it would be a good opportunity to replace other components (clutch, pilot bearing, release bearing).
Again, its possible that the ring just simply popped-off and everything else is OK.
The only time I've seen that gear ring pop off (the pics above) is when the clutch failed.
Or should I say, the person allowed the disc to wear down to the rivets and and disc material just flew everywhere.
It was a bad sign when I removed the starter and a lump of "fur" jumped out at me.
Anyway... not saying your clutch disc/pressure plate is also bad because you would have noticed this days prior to this occurring, but just be aware that since you're dropping the tranny, it would be a good opportunity to replace other components (clutch, pilot bearing, release bearing).
Again, its possible that the ring just simply popped-off and everything else is OK.
#38
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
assuming the clutch is still good, if the flywheel has simply come loose, can it just be pressed back on or will i possibly still need pilot bearings or release bearings? i don't have extra cash to blow on aftermarket parts if i don't really need them.
#39
Grasshopper
iTrader: (1)
If you have a decent press, you may by able to get it back on.
Normally they would heat the gear (extreme heat) to expand it and put it on the flywheel so it'll cool and contract around it.
My concern with simply pressing it on is that it probably won't hold and just come off again.
And thinking back to when I encountered this, I'm pretty sure the gear was still on the flywheel "lip" where it normally sits, so it was already on the flywheel where it should be.
If you don't want to spend the extra cash, look around the FS threads and buy a used OEM one for cheap.
Normally they would heat the gear (extreme heat) to expand it and put it on the flywheel so it'll cool and contract around it.
My concern with simply pressing it on is that it probably won't hold and just come off again.
And thinking back to when I encountered this, I'm pretty sure the gear was still on the flywheel "lip" where it normally sits, so it was already on the flywheel where it should be.
If you don't want to spend the extra cash, look around the FS threads and buy a used OEM one for cheap.
#40
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
that's exactly where i think it is too. i'm able to wiggle it about 1mm for and aft so now i'm almost positive the flywheel will need replacing because i think the center of it has worn big.
#41
Grasshopper
iTrader: (1)
Yeah... you should be able to see the pressure plate bolted to the flywheel, so if that isn't moving when you spin it, the gear definitely popped-off.
Many people upgrade their clutch and flywheel so you should be able to find some used ones in the FS section.
You really can't see the center of the flywheel because the pressure plate is covering it... so not sure what you're seeing there.
Many people upgrade their clutch and flywheel so you should be able to find some used ones in the FS section.
You really can't see the center of the flywheel because the pressure plate is covering it... so not sure what you're seeing there.
#42
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
isn't there a flywheel nut that holds the flywheel tight and a collet under the flywheel? isn't it possible that i just need that nut tightened? maybe the collet replaced and the nut tightened.
#43
Grasshopper
iTrader: (1)
There is a large 54mm nut, no collet... just threads onto the shaft.
The shaft is keyed, so the flywheel would have to come out quite a bit to come off the shaft.
If you've ever removed that nut and flywheel, you'll know that its pretty tough to come off.
Again, the pressure plate is bolted to the flywheel.
So if the gear is spinning and the flywheel and pressure plate isn't, there is nothing else it could be.
The shaft is keyed, so the flywheel would have to come out quite a bit to come off the shaft.
If you've ever removed that nut and flywheel, you'll know that its pretty tough to come off.
Again, the pressure plate is bolted to the flywheel.
So if the gear is spinning and the flywheel and pressure plate isn't, there is nothing else it could be.
#45
Xboxgametag:Chafed Banana
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
what's wierd is that for the last 2 months it has given me trouble starting alot. i would hear the gears but i knew the crankshaft wasn't being turned. if it didn't catch on the first try it would usually by the 3rd. and that's how it was half the time until just the other day when it finally just would not start.
#46
Grasshopper
iTrader: (1)
Makes sense... the ring was slightly loose, but enough to start spinning the shaft.
Its easier to keep a shaft spinning than to initially start it (especially if the ring isn't a tight fit).
Now its to the point where the ring is too loose to get the flywheel/shaft spinning.
Its easier to keep a shaft spinning than to initially start it (especially if the ring isn't a tight fit).
Now its to the point where the ring is too loose to get the flywheel/shaft spinning.
#47
Registered Zoom Zoomer
iTrader: (2)
^ Exactly right. That's why electric motors have a "locked rotor" rating which is essentially electrical inertia (keep in mind that electric motors have max torque at rest - which is why they're excellent as prime propulsion systems). It's also why batteries have a peak amperage rating. It's always easier to keep something moving then to start it moving. Inertia 101.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#49
Holy thread revival. Make sure you've connected it properly and the bolts and spade connector are secured on. Unless you have connected something improperly, It's unlikely to be a fuse. the starter should be engaging.
#50
Metatron
iTrader: (1)
Turn on your headlights, then try to start the car.
If the headlights go 'out', then it's your battery terminals loose, fo sho.
If you just get a click or clunk, but the lights stay bright, it's a bad starter, or loose connection at the starter.
If the lights stay bright and you hear nothing, it's fuse time.
Let us know how it goes......
If the headlights go 'out', then it's your battery terminals loose, fo sho.
If you just get a click or clunk, but the lights stay bright, it's a bad starter, or loose connection at the starter.
If the lights stay bright and you hear nothing, it's fuse time.
Let us know how it goes......
Thread
Thread Starter
Forum
Replies
Last Post
Red Black
Series I Trouble Shooting
11
06-02-2013 11:53 AM