Need help with back glass
11-04-2010, 01:33 PM
#152
Anybody see todays Dilbert? ( http://www.dilbert.com/strips/ ) It just happens to be related to the project I am working on this week. Everybody wants a 2nd monitor on their desk.
11-05-2010, 08:18 AM
#157
I don't have a full time job. I am doing contract work. In my state, anything over 40 hrs/wk is overtime. After today I will be at 54 hrs since Saturday.
On an other topic, my morning commute took a little bit longer this morning. There were 3 state police along the route. Two of them provided me with an escort for about 4 miles.
On an other topic, my morning commute took a little bit longer this morning. There were 3 state police along the route. Two of them provided me with an escort for about 4 miles.
It never snows down here. although we could have had a snow fall last year, we stayed in freezing temps for 5 days straight.
11-08-2010, 09:27 AM
#168
The only reason I would give for choosing a dealership over another shop is if you are concerned about paint matching. Given the nature of the complex paint of the WWP, I went with a dealer owned body shop when my 8 needed repair from the tire tread damage a couple years ago.
Sure every body shop says they can match any paint, but unless you know their work directly, I'd prefer a shop that has the actual factory colors on hand.
Sure every body shop says they can match any paint, but unless you know their work directly, I'd prefer a shop that has the actual factory colors on hand.
11-08-2010, 10:05 AM
#169
On Sunday, I replaced the neutral switch on the transmission. It takes a 27mm wrench to do it. I initially bought a combination wrench for the job, but it turned out that there wasn't enough room to use it between the trans and the tunnel. I got the old one out by cliping the wires off and using a newly purchased socket. The problem was getting the new one installed with the wires intact. I used a dremmel and cut a slot 
in the new socket to give the wires a place to go. It worked fantastic. No more CEL.
in the new socket to give the wires a place to go. It worked fantastic. No more CEL.
