Notices
RX-8 Discussion General discussion about the RX-8 that doesn't fit in one of the specialty forums.
Sponsored by:
Sponsored by: CARiD

Painting my engine cover and sway bar

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 03-23-2010 | 07:59 AM
  #1  
littlenastymf5's Avatar
Thread Starter
Registered
 
Joined: May 2009
Posts: 100
Likes: 0
Painting my engine cover and sway bar

Im pretty sure theres a forum for this, Can anyone point me in that direction? I checked the DIY forums but didnt find anything so if u can just send me the link then that would be cool.

I wanted to paint my plastic engine cover and also wanted to paint my sway bar, both are to be painted red. Im pretty sure i have to use a sertnt type of high heat paint but im not really sure how to go about doing this or what kind of paint to buy. Thanks for the help its much appreciated.
Old 03-23-2010 | 10:08 PM
  #2  
05shinka's Avatar
Bad Company, Till I Die
 
Joined: Jan 2008
Posts: 249
Likes: 0
From: Hopkinsville, KY
I did my sway bar a while back... Purple.. I thought it looked good with the Black Cherry...
Attached Thumbnails Painting my engine cover and sway bar-img00058.jpg  
Old 03-24-2010 | 11:34 AM
  #3  
littlenastymf5's Avatar
Thread Starter
Registered
 
Joined: May 2009
Posts: 100
Likes: 0
Originally Posted by 05shinka
I did my sway bar a while back... Purple.. I thought it looked good with the Black Cherry...
Thats hot, Did u just sand it down and spray over it? What kind of paint did u use
Old 03-24-2010 | 11:37 AM
  #4  
Bigbacon's Avatar
2006 WB AT
iTrader: (4)
 
Joined: Apr 2009
Posts: 1,578
Likes: 2
From: NOVA
Originally Posted by littlenastymf5
Im pretty sure theres a forum for this, Can anyone point me in that direction? I checked the DIY forums but didnt find anything so if u can just send me the link then that would be cool.

I wanted to paint my plastic engine cover and also wanted to paint my sway bar, both are to be painted red. Im pretty sure i have to use a sertnt type of high heat paint but im not really sure how to go about doing this or what kind of paint to buy. Thanks for the help its much appreciated.
I used caliper paint (Dupli-Color spray paint) on my engine cover and strut bar and it has held up perfectly.

you could probably use any high heat engine enamel I bet.
Old 03-24-2010 | 11:54 AM
  #5  
littlenastymf5's Avatar
Thread Starter
Registered
 
Joined: May 2009
Posts: 100
Likes: 0
Originally Posted by Bigbacon
I used caliper paint (Dupli-Color spray paint) on my engine cover and strut bar and it has held up perfectly.

you could probably use any high heat engine enamel I bet.
Wow urs came out sick also. My ride is nordic green i was thinking about hooking up under the hood red and black. I got the red LEDs also
Old 03-24-2010 | 05:48 PM
  #6  
05shinka's Avatar
Bad Company, Till I Die
 
Joined: Jan 2008
Posts: 249
Likes: 0
From: Hopkinsville, KY
Originally Posted by littlenastymf5
Thats hot, Did u just sand it down and spray over it? What kind of paint did u use
Its call Multi-cast... made by duplicolor... got it at autozone... its a 2 phase paint. I sanded it to rough it up.. cleaned up all the dust.. then sprayed the first couple of coats which looks like a silver... let that dry completely.. then spayed the clear purple... the silver shines through... i thought it turned out pretty well...

Just take your time and add light coats a little at a time.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Solidtrance
Series I Wheels, Tires, Brakes & Suspension
22
09-04-2015 01:47 PM
ShadowDragon78
RX-8 Discussion
14
08-21-2015 04:29 PM
ShadowDragon78
RX-8 Parts For Sale/Wanted
7
08-11-2015 07:42 AM
MolecularConcept
New Member Forum
7
07-26-2015 10:09 PM
AussieGray
RX-8's For Sale/Wanted
0
07-16-2015 04:58 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Painting my engine cover and sway bar



All times are GMT -5. The time now is 11:42 AM.