Shifter Vibration
#26
He's as bad as Can
Video of the Shifter
I thought a video might help. RIGHT CLICK / SAVE AS Will need Quicktime.
First 45 seconds is at idle, then I take it up to 3,000 RPM. The ticking sound during the 1st 20 seconds was from the mini tripod. As of three weeks ago my motor mounts are fine. I never found this to be a problem, in fact I think for a sports car it adds character.
First 45 seconds is at idle, then I take it up to 3,000 RPM. The ticking sound during the 1st 20 seconds was from the mini tripod. As of three weeks ago my motor mounts are fine. I never found this to be a problem, in fact I think for a sports car it adds character.
Last edited by expo1; 09-06-2008 at 04:57 PM.
#27
Registered
iTrader: (1)
i missed this my long l0st C&D friend ! congrats on the purchase!!
On the warranty issue, keep in mind our cars powertrain warranties were extended to 5 years. The shifter vibration is normal since the shifter is mounted directly on the tranny rather then mounted on the chassis and connected by levers/cables... in fact you can pull the shifter out and fill your tranny fluid up through the hole.
Also remember with having a rotary - keep an eye on the oil level since its injected by design and avoid shutting the car off before the engine warms up to prevent flooding... and remember to redline it often
On the warranty issue, keep in mind our cars powertrain warranties were extended to 5 years. The shifter vibration is normal since the shifter is mounted directly on the tranny rather then mounted on the chassis and connected by levers/cables... in fact you can pull the shifter out and fill your tranny fluid up through the hole.
Also remember with having a rotary - keep an eye on the oil level since its injected by design and avoid shutting the car off before the engine warms up to prevent flooding... and remember to redline it often
![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
Last edited by r0tor; 05-03-2007 at 06:49 PM.
#28
Registered
Thread Starter
Join Date: Apr 2007
Location: Revere, MA
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the welcome into the family, guys. r0tor, glad to see you're here. Even more glad to see that you still have the Rex.
Below are some pics that I took late last night. I'll try to take better pics later.
![](http://i5.photobucket.com/albums/y154/bassy09/IMG_5345.jpg)
There was only 8520 miles on the clock when I picked her up:
![](http://i5.photobucket.com/albums/y154/bassy09/IMG_5354.jpg)
Below are some pics that I took late last night. I'll try to take better pics later.
![](http://i5.photobucket.com/albums/y154/bassy09/IMG_5345.jpg)
There was only 8520 miles on the clock when I picked her up:
![](http://i5.photobucket.com/albums/y154/bassy09/IMG_5354.jpg)
![](http://i5.photobucket.com/albums/y154/bassy09/IMG_5347.jpg)
#29
Skeet skeet skeet
Join Date: Jun 2006
Location: making my way to the ATL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by expo1
These photos are not the best but here goes. Our 8 has as a front engine / rear drive configuration with the transmission right behind the engine. The shifter is directly on top of the trans so vibrations are transmitted right up the shifter.
On a front wheel drive car the trans is to the left / right of the engine. The shifter connects to the trans by means of a cable or linkage. Vibrations are less because the shifter is not directly connected to the trans.
On a front wheel drive car the trans is to the left / right of the engine. The shifter connects to the trans by means of a cable or linkage. Vibrations are less because the shifter is not directly connected to the trans.
Thanks expo. understood
Thread
Thread Starter
Forum
Replies
Last Post