Swap 4 Rotary into Rx 8
#27
Administrator
dk - where do you live?
how much money do you have?
i know where there are at least 2 4 rotors just sitting in a corner at a shop in the eastern US and im pretty sure i could point you to 3 on the west coast
how much money do you have?
i know where there are at least 2 4 rotors just sitting in a corner at a shop in the eastern US and im pretty sure i could point you to 3 on the west coast
#28
printf("</%i pistons",3);
Join Date: Dec 2006
Location: I'm a yankee trapped in Houston!!
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
OK DK, I'm going to give you the benifit of the doubt on all of this...
I'm going to assume...
...that your bad grammar is due to English not being your primary language
...your eagerness to do this is because you feel you've got enough time & money to accomplish it
...your lack of rotary knowledge isn't as bad as it seems
...you realize the amount of customization involved, and know good fabricators who are willing to help you.
Given all that, here's my advice to you:
- Give up looking for a 4 rotor engine. You're not going to find one. Even if you somehow do, it's going to be ungodly expensive, and there are probably only 10 mechanics on the planet that can help you with the install & tune.
- Find an empty 8 frame and start from there. A 4 rotor will never fit in the engine bay as-is. Your best bet would be to start from the ground up. Make good friends with an engineer because lots of carving will be involved, and you do NOT want to lose structural integrity with that much power.
- Research the Susuki Escudo. Somehow they mounted twin V6 turbocharged motors - one in front, one in back - to build a "V12 TT" rally car. 4rotors have never been done on street cars before, so a twin-Renisis setup might be the cheapest option. I recommend the Escudo method because you've got 2 seats and a decent trunk in the RX8 that could easily house another 13b. Trying to line up 2 motors in the front of the car would be nearly impossible, as well as SEVERELY throw off the weight balance of the car. Placing a second motor midship would comprimise handling less than any other method.
...and if you are just a kid with outrageous hopes and dreams, face the facts and realize that faith is going to accomplish nothing here.
I'm going to assume...
...that your bad grammar is due to English not being your primary language
...your eagerness to do this is because you feel you've got enough time & money to accomplish it
...your lack of rotary knowledge isn't as bad as it seems
...you realize the amount of customization involved, and know good fabricators who are willing to help you.
Given all that, here's my advice to you:
- Give up looking for a 4 rotor engine. You're not going to find one. Even if you somehow do, it's going to be ungodly expensive, and there are probably only 10 mechanics on the planet that can help you with the install & tune.
- Find an empty 8 frame and start from there. A 4 rotor will never fit in the engine bay as-is. Your best bet would be to start from the ground up. Make good friends with an engineer because lots of carving will be involved, and you do NOT want to lose structural integrity with that much power.
- Research the Susuki Escudo. Somehow they mounted twin V6 turbocharged motors - one in front, one in back - to build a "V12 TT" rally car. 4rotors have never been done on street cars before, so a twin-Renisis setup might be the cheapest option. I recommend the Escudo method because you've got 2 seats and a decent trunk in the RX8 that could easily house another 13b. Trying to line up 2 motors in the front of the car would be nearly impossible, as well as SEVERELY throw off the weight balance of the car. Placing a second motor midship would comprimise handling less than any other method.
...and if you are just a kid with outrageous hopes and dreams, face the facts and realize that faith is going to accomplish nothing here.
#29
DGAF
iTrader: (1)
Join Date: Jan 2006
Location: Austin, TX
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys
I know some of those guys can't believe what i will do for my faith, I want to success in my 8 project and let's me handle my business with 4 rotary project maybe i can talk to mazda factory or buyin from some one i don t care how far it is and i keep my lucky with me and i will keep my faith with me.
DK RX 8
I know some of those guys can't believe what i will do for my faith, I want to success in my 8 project and let's me handle my business with 4 rotary project maybe i can talk to mazda factory or buyin from some one i don t care how far it is and i keep my lucky with me and i will keep my faith with me.
DK RX 8
#30
Senior Member
iTrader: (1)
Anyways, if he has the money and time to put into this, then it'll be a very interesting process. Even if he doesnt have a place in mind to do the work, there are members here with plenty of knowledge to help. I dont know about you guys, but if he's serious about this, I'd really like to see this happen (out of interest mind you, not doubt).
btw zoom44, just for general knowledge on the forum... how much would you be looking to spend to buy one of those 4 rotor engines? Not that most of us could afford it, but just so we know...
#32
Administrator
iTrader: (7)
this would be a VERY expensive swap. I hope you know what you're getting into...
#34
Hey Guys
Alot of guys don't know about me, Well I'm a deaf guy that's why i have a bad grammar because english ain't my first language it's my second language, My first language is A.S.L. ( American Sign Language ) I'm so apologize about it.
I have alot of money to hold for 4 rotor i want 26B and i want success in my process and i'm work on to get 4 rotor if any guys can help me and find one thanks
DK RX 8
Alot of guys don't know about me, Well I'm a deaf guy that's why i have a bad grammar because english ain't my first language it's my second language, My first language is A.S.L. ( American Sign Language ) I'm so apologize about it.
I have alot of money to hold for 4 rotor i want 26B and i want success in my process and i'm work on to get 4 rotor if any guys can help me and find one thanks
DK RX 8
#37
Administrator
ding a ding a ding a ding ding ding ding unfortunately Red Devil you forgot to phrase your answer in the form of a question giving the others a chance to steal.
DK where are you located? i dont mean your street address just general locale and spit it out- how much money do you have to put into this project?
DK where are you located? i dont mean your street address just general locale and spit it out- how much money do you have to put into this project?
#38
Blue By You
Join Date: Jun 2003
Location: Milwaukee
Posts: 8,717
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys
Alot of guys don't know about me, Well I'm a deaf guy that's why i have a bad grammar because english ain't my first language it's my second language, My first language is A.S.L. ( American Sign Language ) I'm so apologize about it.
I have alot of money to hold for 4 rotor i want 26B and i want success in my process and i'm work on to get 4 rotor if any guys can help me and find one thanks
DK RX 8
Alot of guys don't know about me, Well I'm a deaf guy that's why i have a bad grammar because english ain't my first language it's my second language, My first language is A.S.L. ( American Sign Language ) I'm so apologize about it.
I have alot of money to hold for 4 rotor i want 26B and i want success in my process and i'm work on to get 4 rotor if any guys can help me and find one thanks
DK RX 8
You still haven't answered the question. Do you have over 100k to put into this build?
#39
printf("</%i pistons",3);
Join Date: Dec 2006
Location: I'm a yankee trapped in Houston!!
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
I can't for the life of me figure out how being deaf would cause someone to have bad grammar, but ok.
#40
Registered User
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
ding a ding a ding a ding ding ding ding unfortunately Red Devil you forgot to phrase your answer in the form of a question giving the others a chance to steal.
DK where are you located? i dont mean your street address just general locale and spit it out- how much money do you have to put into this project?
DK where are you located? i dont mean your street address just general locale and spit it out- how much money do you have to put into this project?
#46
Registered User
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
#48
I'm no expert by any means, in fact I'm barely able to change my own oil, but 100K for a 4rotor swap????? give me a break, just because the guy wants a 4rotor engine doesn't mean he HAS to get one of the few mazda built for the 787B. Can he just put 2 13b together like many other people have done????
Also I don't see why it wouldn't fit??? does any1 has any measurements on the 26b??? According to HurleyRotary out of the UK a 20b(or adding a 3rd rotor to a 13b) only adds less than 5in to the total length of the engine so wouldn't a 4th rotor add another 5in or 10in total(from 13b to 26b)?????
There's a few places around the world that would make you a 26b, and I can assure you none of the will ask you for 100k, I'm not saying putting a 26b on an 8 is cheap, but I really don't think it'll run all the way to 100k, I'll say 50k, 60k tops.
Like I said, I'm no expert but by reading some of the answers it sounds like it's impossible in every way imaginable.
Also I don't see why it wouldn't fit??? does any1 has any measurements on the 26b??? According to HurleyRotary out of the UK a 20b(or adding a 3rd rotor to a 13b) only adds less than 5in to the total length of the engine so wouldn't a 4th rotor add another 5in or 10in total(from 13b to 26b)?????
There's a few places around the world that would make you a 26b, and I can assure you none of the will ask you for 100k, I'm not saying putting a 26b on an 8 is cheap, but I really don't think it'll run all the way to 100k, I'll say 50k, 60k tops.
Like I said, I'm no expert but by reading some of the answers it sounds like it's impossible in every way imaginable.
#49
By the way here's the link to hurleyrotary, look all the way at the bottom, they offer a six rotor engine, that's right SIX ROTOR:
http://www.hurleyrotary.com/page.php...ntpageref=6265
Also check this one from scoot sports from japan:
http://www.youtube.com/watch?v=FBZL-GGbA4s
Also Mazsport.com out of Australia does some crazy stuff, like a 4rotor on a BMW
http://www.mazsport.com/
http://www.mazdarotary.net/queenstbmw.htm
One more out of Orlando, FL
http://www.amvracing.com/20080_397.asp
http://www.hurleyrotary.com/page.php...ntpageref=6265
Also check this one from scoot sports from japan:
http://www.youtube.com/watch?v=FBZL-GGbA4s
Also Mazsport.com out of Australia does some crazy stuff, like a 4rotor on a BMW
http://www.mazsport.com/
http://www.mazdarotary.net/queenstbmw.htm
One more out of Orlando, FL
http://www.amvracing.com/20080_397.asp
Last edited by khronus79; 10-09-2007 at 10:11 PM.
#50
Destroying Threads
in Japan, people have done a 4 rotor swap by putting 2 13B-REWs together, but they couldn't fit that into a convetional car, they did put it in an FD, bmw 335i etc etc though, plenty of vids on you tube
Khronus, we are being dead serious, get 100k+ or its not going to happen, I'm serious, because 50-60k will get you in a gigantic and fiery crash because your car will suck after that, might not even be able to go straight in a line, everything will be fucked up, you will have to strip everything, reinforce the chassis with streel braided cages and roll bars, every ******* thing, go wide body to support the weight........omfg, the list goes on and on, can't you just go buy a lambo? god
Khronus, we are being dead serious, get 100k+ or its not going to happen, I'm serious, because 50-60k will get you in a gigantic and fiery crash because your car will suck after that, might not even be able to go straight in a line, everything will be fucked up, you will have to strip everything, reinforce the chassis with streel braided cages and roll bars, every ******* thing, go wide body to support the weight........omfg, the list goes on and on, can't you just go buy a lambo? god