What bulbs w/ clear corners?
#1
What bulbs w/ clear corners?
I got my clear corners, and haven't installed them yet. But I have a question. What bulbs do I need to get to go with them? And where do I get them? I need to get the bulbs quick, because my car is going in for a new bumper on Wednesday beacause I hit a friggin' deer, so this would be a perfect time to have them put on.
Thanks.
Thanks.
#2
I hear Stealth bulbs are best or you can go with ones with the orange top on them. I forget the Number of bulb but there have been lots of threads on Clear Corners. I want to do the same but I just bought the car and I am still breaking it in.
#3
#5
yup the clear corners are 194s...if your state allows it get bright white LED's (check out my avatar pic)...if not probably go with LED amber then...the reason is:
1.they are naturally stealth
2.they will last forever
3.they will run very cool...before I had the LEDs I had stealth bulbs in there...from 2 different companies (one was expensive the other cheap) both of them melted the plastic around the bulb and it ended up sticking to the bulb...I had tear out the bulbs with a needle noise pliers as some of the plastic had melted into the base...it was horrible
1.they are naturally stealth
2.they will last forever
3.they will run very cool...before I had the LEDs I had stealth bulbs in there...from 2 different companies (one was expensive the other cheap) both of them melted the plastic around the bulb and it ended up sticking to the bulb...I had tear out the bulbs with a needle noise pliers as some of the plastic had melted into the base...it was horrible
#6
I had stealth bulbs in there...from 2 different companies (one was expensive the other cheap) both of them melted the plastic around the bulb and it ended up sticking to the bulb...I had tear out the bulbs with a needle noise pliers as some of the plastic had melted into the base...it was horrible
I ordered replacement sockets and when they arrive, I'm gonna put my original amber side markers back in. If I get clear corners again, I'll go with amber LEDs so they won't melt the plastic. Any suggestions on which ones to get? I originally ordered the incandescent bulbs from http://superlumination.com/194.htm
#7
+1 for LED bulbs. Amber or white, they are the best route to go. Go to www.v-leds.com and look for the 194 - 5 LED Refractor bulbs. While you're there, pick up an extra pair for the parking lights. I've tried quite a few different LEDs for the parking lights and have found that the refractor bulbs work best there also, I recomend the white ones.
Honestly, I wouldn't worry about getting the bulbs in time for your bumper replacement as it is super easy to swap out the amber corners for clear corners, all you need is a philips screwdriver and about 10 minutes.
Honestly, I wouldn't worry about getting the bulbs in time for your bumper replacement as it is super easy to swap out the amber corners for clear corners, all you need is a philips screwdriver and about 10 minutes.
#11
Thanks for the feedback everyone. I ordered those amber 5-way 194 refractor LEDs from V-LEDS.COM.
The only reason to remove the reflectors is aesthetic, right? I didn't bother with my first set of clear corners because I didn't think the amber reflector inside the clear corners was all that noticeable.
Appreciate your DIY (it's why it only took me 10 min to do the first install). I actually posted there 3 years ago: https://www.rx8club.com/showpost.php...&postcount=117.
Apparently some incandescent amber 194 bulbs run hotter than others... good luck with yours!
The only reason to remove the reflectors is aesthetic, right? I didn't bother with my first set of clear corners because I didn't think the amber reflector inside the clear corners was all that noticeable.
Apparently some incandescent amber 194 bulbs run hotter than others... good luck with yours!
Last edited by Deslock; 05-08-2007 at 02:54 PM.
#13
Thanks for the feedback everyone. I ordered those amber 5-way 194 refractor LEDs from V-LEDS.COM.
The only reason to remove the reflectors is aesthetic, right? I didn't bother with my first set of clear corners because I didn't think the amber reflector inside the clear corners was all that noticeable.
The only reason to remove the reflectors is aesthetic, right? I didn't bother with my first set of clear corners because I didn't think the amber reflector inside the clear corners was all that noticeable.
#15
I have the 5 LED Refractor whites in the parking lights.
Normal 6 LED's whites in the clear sides, license plate, and trunk.
Normal 6 LED's blue everywhere in the interior including the courtesy, map, footwells, and rear dome light or whatever the hell you wanna call it. I really like all of these very much and are great! All from V-LED of course!
I really want to get to the entire dash(including the stereo face), steering wheel, window switches, and center console seat warmer switches, so I guess in due time I may try to do all of these.
Normal 6 LED's whites in the clear sides, license plate, and trunk.
Normal 6 LED's blue everywhere in the interior including the courtesy, map, footwells, and rear dome light or whatever the hell you wanna call it. I really like all of these very much and are great! All from V-LED of course!
I really want to get to the entire dash(including the stereo face), steering wheel, window switches, and center console seat warmer switches, so I guess in due time I may try to do all of these.
Last edited by Mazurfer; 05-08-2007 at 05:46 PM.
#16
#17
-bigred
#19
I'm liking the LEDs as well; I have amber burning ones, and I can't see much of a difference between them my old stealth bulbs. BTW, I am selling a new pair of Stealth Bulbs #194 that I never used if you are wanting to go that route instead of LEDs ($20 shipped): https://www.rx8club.com/showthread.php?p=1869064
Last edited by maskedferret; 05-09-2007 at 01:11 AM.
#20
#21
Yeah, I know.......I was just surprised that you have blue in the side markers. Probably look pretty cool though!
#22
I just put in the leds. I was turning on he turning lights, but there wasnt any light coming on. I thought these were no modification replacements...are they not? The just fit right in the corner sockets.
Thanks again,
Alex
Thanks again,
Alex
Thread
Thread Starter
Forum
Replies
Last Post
BigOLundh
RX-8 Multimedia/Photo Gallery
54
02-24-2008 04:12 PM
momo stereo
Series I Exterior Appearance and Body Kits
9
03-11-2006 10:44 PM
Discman2
RX-8 Multimedia/Photo Gallery
29
03-17-2005 03:21 AM
whosyourbaba
Series I Exterior Appearance and Body Kits
17
03-26-2004 04:35 AM