What did you do with your RX8 today?
#2601
#2604
Water Foul
Not at all. It was just something I did with my car today
The overheating tendency has been an ongoing issue since it got stupid hot in SoCal this month. I keep an eye on the coolant temp via OBD2 to keep it from getting to 230F. Probably I need to check the condition of the radiator foam.
The overheating tendency has been an ongoing issue since it got stupid hot in SoCal this month. I keep an eye on the coolant temp via OBD2 to keep it from getting to 230F. Probably I need to check the condition of the radiator foam.
The main culprits typically are:
1. Faulty thermostat that does not open completely
2. Dirty radiator fins that need to be flushed with water
3. Weak or otherwise faulty fans
4. Obstruction or build-up in the system likely caused by old coolant and/or the use of Water Wetter
It is true that the 8's cooling system is not the strongest in the world, but it will function properly in triple digit heat if it is well-maintained.
#2605
///// Upscale Zoom-Zoom
Not at all. It was just something I did with my car today
The overheating tendency has been an ongoing issue since it got stupid hot in SoCal this month. I keep an eye on the coolant temp via OBD2 to keep it from getting to 230F. Probably I need to check the condition of the radiator foam.
The overheating tendency has been an ongoing issue since it got stupid hot in SoCal this month. I keep an eye on the coolant temp via OBD2 to keep it from getting to 230F. Probably I need to check the condition of the radiator foam.
The science behind it is: heat transferred = h * A * (delta T). The most important is the surface area and the H (h=heat transfer coefficient which is related to flow and surface thermal conductivity - fouling). Engines are all designed due the BAE/SAE standards to withstand a large temperature difference even in static (stop/go traffic) conditions on the hot and cold sides. FL-22 coolant (not diluted and regularly replaced) should prevent fouling. However if the previous owner didn't replace with FL-22 or used aftermarket coolant the h has changed. An aftermarket radiatior or cooling fan mafunction/change will also play a role.
More info at:
https://www.google.com/url?sa=t&rct=...24088155,d.bGs
#2607
Dark Moderator
iTrader: (18)
I modified and mounted my undertray last night. I've also tapped a new drain plug into the pan and changed out my Turbo oil drain fitting with one that has an o ring build in.
Before that i had to replace two coils (both leading).
Busy
busy
Travis
Before that i had to replace two coils (both leading).
Busy
busy
Travis
#2608
Rican
I got mine Dyno, a little disappointing, but it was a heart-breaker Mustang Dyno. Got 165whp or so, but I think it was the premix lowering the octane and the Dyno reading about 5 or 10% lower, will have to take it somewhere else to get a second opinion. For those of you that know a whole lot more than me, take a look at the chart and see what you think about the 2 dips, one at 6.5k and the second at about 8k, what do you guys think? Clutch? The car has the original clutch with 34k miles.
#2612
Modulated Moderator
iTrader: (3)
I got mine Dyno, a little disappointing, but it was a heart-breaker Mustang Dyno. Got 165whp or so, but I think it was the premix lowering the octane and the Dyno reading about 5 or 10% lower, will have to take it somewhere else to get a second opinion. For those of you that know a whole lot more than me, take a look at the chart and see what you think about the 2 dips, one at 6.5k and the second at about 8k
, what do you guys think? Clutch? The car has the original clutch with 34k miles.
Thats a pretty normal looking dyno for a stock 8. The curve is normal...the 2 dips are when the intake tract valves open. The numbers aren't even that bad for that type of Dyno
#2614
The Stink w.o The Sause
iTrader: (5)
Not at all. It was just something I did with my car today
The overheating tendency has been an ongoing issue since it got stupid hot in SoCal this month. I keep an eye on the coolant temp via OBD2 to keep it from getting to 230F. Probably I need to check the condition of the radiator foam.
The overheating tendency has been an ongoing issue since it got stupid hot in SoCal this month. I keep an eye on the coolant temp via OBD2 to keep it from getting to 230F. Probably I need to check the condition of the radiator foam.
#2617
i threw on some new tires on her. the rear driver side i was through the steel belts and into them on the passenger side.
additionally, i got the new sway bar end links installed. there was no unthreading them, as they the nut was solid rusted on. i ultimately had to cut off and grind down the nut to get them off.
additionally, i got the new sway bar end links installed. there was no unthreading them, as they the nut was solid rusted on. i ultimately had to cut off and grind down the nut to get them off.
#2618
My rx8 is at mechanic and i need same information's pls !!!!
MY ENGINE HAS A SERIOUS PROBLEM OF PRESSURE !!!!
Here in Cyprus i asked 2 mechanics that can fix it and the amount they are telling me is very high. 4000 Euros !!!!
My mazda is 2004 6 speed transmition manual.
I found an engine for an automatic RX8 in a very very good contrition only 800 euros with 11000 km only on it. ( the car crashed and the engine is actually new)
Is it suitable for my RX8 or is very different and i will have problems????
Pls tell me your opinions
Thnx in advance
Costas
Here in Cyprus i asked 2 mechanics that can fix it and the amount they are telling me is very high. 4000 Euros !!!!
My mazda is 2004 6 speed transmition manual.
I found an engine for an automatic RX8 in a very very good contrition only 800 euros with 11000 km only on it. ( the car crashed and the engine is actually new)
Is it suitable for my RX8 or is very different and i will have problems????
Pls tell me your opinions
Thnx in advance
Costas
#2619
RX8 Engine Problem
My rx8 is at mechanic and i need same information's pls !!!!
MY ENGINE HAS A SERIOUS PROBLEM OF PRESSURE !!!!
Here in Cyprus i asked 2 mechanics that can fix it and the amount they are telling me is very high. 4000 Euros !!!!
My mazda is 2004 6 speed transmition manual.
I found an engine for an automatic RX8 in a very very good contrition only 800 euros with 11000 km only on it. ( the car crashed and the engine is actually new)
Is it suitable for my RX8 or is very different and i will have problems????
Pls tell me your opinions
Thnx in advance
Costas
Pls sent me personal msg thnx
MY ENGINE HAS A SERIOUS PROBLEM OF PRESSURE !!!!
Here in Cyprus i asked 2 mechanics that can fix it and the amount they are telling me is very high. 4000 Euros !!!!
My mazda is 2004 6 speed transmition manual.
I found an engine for an automatic RX8 in a very very good contrition only 800 euros with 11000 km only on it. ( the car crashed and the engine is actually new)
Is it suitable for my RX8 or is very different and i will have problems????
Pls tell me your opinions
Thnx in advance
Costas
Pls sent me personal msg thnx
#2620
Registered
Join Date: Jan 2014
Location: MD Eastern Shore
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Trans and Diff fluid
Changed my transmission and differential fluid. First changed them a little over 2 years ago at 12,900 miles and yesterday again at 41,800 miles. Redline MT90 75W90 GL-4 and Redline 75W90 GL-5 from Amazon.
Some ugly pics there with the metal shavings caught by the magnet. The last picture is of the trans fluid after it was drained into the plastic pan.
The fluids have one solid season of autocrossing. I didn't really do any autocrossing last year and saw pretty much all highway commuting miles with some DC traffic. This year just been driving around town since my new job is only a few minutes from my house.
I've got an SCCA Track Night in a couple of weeks in NJ, so doing some maintenance.
Some ugly pics there with the metal shavings caught by the magnet. The last picture is of the trans fluid after it was drained into the plastic pan.
The fluids have one solid season of autocrossing. I didn't really do any autocrossing last year and saw pretty much all highway commuting miles with some DC traffic. This year just been driving around town since my new job is only a few minutes from my house.
I've got an SCCA Track Night in a couple of weeks in NJ, so doing some maintenance.
#2621
1% evil, 99% hot gas.
iTrader: (21)
motohegg, that's normal metal bits on your drain plugs. The fluid in the pan looks a bit milky, like maybe there is some water contamination, but always hard to tell from a picture. If it shift fine I wouldn't sweat it.
Today I ordered new side seals for my diff. I have a leak, I think I nicked one when I swapped in the replacement diff. It's not bad, but leaks right onto the exhaust which smells wonderful after a hard run on the track...
Today I ordered new side seals for my diff. I have a leak, I think I nicked one when I swapped in the replacement diff. It's not bad, but leaks right onto the exhaust which smells wonderful after a hard run on the track...
#2622
Registered
Join Date: Jan 2014
Location: MD Eastern Shore
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Wankelbolt, cool. Thanks. Yeah, everything seems to be working smoothly. No issues that I can tell.
I like your signature. I also have a VR Sport 6MT ('11) with manual cloth seats, NO: sunroof, fancy stereo, TC, SC.
I like your signature. I also have a VR Sport 6MT ('11) with manual cloth seats, NO: sunroof, fancy stereo, TC, SC.
#2624
Replaced the A/C amplifier this afternoon.
I was having the cold-warm-cold cycling issue. The car is an early-04 VIN that fell into the 07-002/04 TSB. But since the car is out of warranty, the dealer told me it would be at least $500. So I picked up a used a/c amplifier for $50 and replaced it myself.
It has definitely made a difference. But I still have compressor cycling when fan speed is 1-3. Oddly though no cycling when on 4. But it no longer gets as warm. I'm thinking I could still have a bad sensor, or possibly the controls. Going to drive it around a few days in this lovely Arizona heat and decide if I need to dig further.
Oh and the damn part is a PITA to reach. Particularly the back screw. But then I think I'm used to that kind of thing now on the RX8.
I was having the cold-warm-cold cycling issue. The car is an early-04 VIN that fell into the 07-002/04 TSB. But since the car is out of warranty, the dealer told me it would be at least $500. So I picked up a used a/c amplifier for $50 and replaced it myself.
It has definitely made a difference. But I still have compressor cycling when fan speed is 1-3. Oddly though no cycling when on 4. But it no longer gets as warm. I'm thinking I could still have a bad sensor, or possibly the controls. Going to drive it around a few days in this lovely Arizona heat and decide if I need to dig further.
Oh and the damn part is a PITA to reach. Particularly the back screw. But then I think I'm used to that kind of thing now on the RX8.
Last edited by GM Enthusiast; 06-11-2016 at 06:30 PM.