Building the RX-8 Motor - AutoWeek
03-06-2003 | 10:33 PM
#26
Registered User
Joined: Dec 2002
Posts: 97
Likes: 0
It's interesting that the Renesis is hand assembled.. Would you say this will make it a better quality product or less?
03-08-2003 | 01:11 AM
#27
Registered User
Joined: Sep 2002
Posts: 363
Likes: 0
From: Illinois
Balanced engine
I bet that an Inline 6 or either configuration of V12 would do it, 60 or 180 degree.
Spinning an engine isn't the same as placing load on it. V6 engines spin freely with minimal vibration under no load, but loaded up is another matter.
There isn't any inherent balance to the Wankel engine. Two counterweights are used to offset the rotors. Making sure the center of mass of the rotor is actually in the center isn't something new.
Spinning an engine isn't the same as placing load on it. V6 engines spin freely with minimal vibration under no load, but loaded up is another matter.
There isn't any inherent balance to the Wankel engine. Two counterweights are used to offset the rotors. Making sure the center of mass of the rotor is actually in the center isn't something new.
03-11-2003 | 11:53 AM
#28
RX-8: Hmmmmmmmmmmmmm.....
Joined: Feb 2003
Posts: 799
Likes: 0
From: Toronto, Canada
Originally posted by Quick_lude
In Canada we have a show on TSN called Motoroing. For the longest time during Test Drives, Graham Fletcher would do the loonie test.. he would stand up a loonie coin on the engine while at idle. Now I'm sure if he revved the engine to 5K rpm, most would not pass that.. not too many piston engines would. The rotary definitely wins in the smoothness department, this is one of the reasons I'm dying to test drive one asap.
In Canada we have a show on TSN called Motoroing. For the longest time during Test Drives, Graham Fletcher would do the loonie test.. he would stand up a loonie coin on the engine while at idle. Now I'm sure if he revved the engine to 5K rpm, most would not pass that.. not too many piston engines would. The rotary definitely wins in the smoothness department, this is one of the reasons I'm dying to test drive one asap.
But guys, I'm too a big Rotary Engine fan and knows all the benefits of the Rotary engine design, but come on, you have to admit, there are some pretty sweet pistons engine out there.
Take the Lexus V8, many times they did the champaign glass pyramid test with the engine going at 6,000+ RPM. That is some fine fine Japanese engine for sure. You gotta appreciate that if you even remotely like cars.
03-11-2003 | 07:57 PM
#29
uhhhhh....hello?
Joined: Dec 2002
Posts: 1,024
Likes: 0
yeah, that engine is freking great. and those commercials used to be sooooooo cool.
________
Ford specs
________
Ford specs
Last edited by P00Man; 04-16-2011 at 06:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post