alloyicon

I went for a ride with my friend in his new 08 Mazda 3 5door and when we pulled into the gas station where on the other side of the fuel pump was a brand new mazda 5 without plates. So i'm standing in the middle of two brand new Mazdas & figured I'll kill some time talking to this guy about how he likes his Mazda 5.
As it turns out he works for Mazdaspeed in Irvine. I tried to gleam from him anything I could. But he said he was unable to speak about internal projects. When I asked about a future RX-7, he said there would not be another. (So I'd like to think that if there is a future Rotary powered sports car, it may be known by a new RX-#) I asked if there was a 1.6 liter Rotary in the works and he confirmed there is such an engine and it is called the 16c.
Also if you autocross your Mazda twice, you are eligible to purchase parts from the dealer at dealer cost. He said something about you have to register online with Mazda.

thecow135

Also if you autocross your Mazda twice, you are eligible to purchase parts from the dealer at dealer cost. He said something about you have to register online with Mazda.

whoa whoa whoa... what is this all about here?

Renesis_8

must've been excited to hear 16c is in the works from him.
________
AVANDIA LAWSUITS

Cody Red

basically you can go to mazdaspeedmotorsports.com and you register with this site to join the Mazda Support Team Program.

you get a 10% discount off of mazdaspeed products.

you can also just order oem replacement stuff, or 'collision repair' products from there.

I flipped out when I saw an ad for this (Grassroots Motorsports magazine) but I basically have the mods I would have purchased from Mazdaspeed anyways. I'm still considering the struts and the lsd, but that won't be for a while.

16c seems very exciting if true.

nycgps

iTrader: (1)

I know the next next version of the engine will be called "19d"

Tamas

iTrader: (1)

...because it will be a 1.9 liter Diesel

lesper4

iTrader: (3)

cool story, too bad he couldnt tell you more.

swoope

iTrader: (5)

met a girl that new the guy that invented "my little pony"

cool huh?

beers

cavemancan

Actually, no I met him too. Check it out...

https://www.rx8club.com/showthread.php?t=105067

alnielsen

iTrader: (4)

And he could have been just an average Mazda owner, that doesn't know anymore than you and I, that is just blowing smoke up your .......
Sorry, but getting information from some unknown guy at the gas station doesn't go too far with me.

Floyd

Well, the fact that he quoted 16c interests me. It shows atleast a basic familiarity with rotor nomanclature, which is not really a common knowledge/random person at a gas pump knowing all about it sort of thing.

rotarygod

Mazda has had the autocross deal for at least a decade as far as I know. It used to be through Mazdacomp but I guess it's just Mazdaspeed now. You need to autocross or enter a "driving school" which is nothing more than a way to get your car on a roadcourse, at least twice in 1 year to be eligible for the discount. You need to send in your track results as proof along event with info they can look up to verify your actual participation so that you aren't sending in some made up form. They've done this for a long time.

I still doubt a 1.6L but you never know.

pfloydss

Acctualy my cusins friends Dad invented my lil pony.

RoXanneBlack8

mazdacompetition used to be very secretive, not even a website about it, anyone who reads grassroots motorsports knows about mazdaspeed motorsports. all u gotta do is prove u race and they give u discounts on stuff.....and then when u go in for warranty probs on ur trans they say F you bc u got an intake...wtf


i agree.....i work at a mazda dealer ship and the salesmen are such morons they misquote stuff all the time....until i corrected them they were callin the rx8 engine genesis....imagine if that leaked out, thered be a thread here....NEW GENESIS ENGINE IN 08 RX8!.....i dont believe what ANYONE says about ANYTHING. especially when it comes to this mazdaspeed, rx8, rx9 rx7 turbo 16d bullshit....

2010 everyone......untill then, shut up.

sosonic

What you should of done was slap the sh*t out of him and demand to know why there is no Mazdaspeed RX-8.

I also would not be surprised that if you start talking to some of the Mazdaspeed personnel, that they do not really like rotary engines. They rather play with turbo and safe design "off the shelf" piston engines.

Brettus

iTrader: (2)

how about this - called into my local Mazda dealer recently to buy some parts . In talking with the parts guy he comes out with " they don't make the RX8 anymore"
which flooerd me coming from a Mazda staff member .
So this weekend I'm talking with the Mazda service manager for NZ who happens to be at the track where they are testing the new MS3 for this years production car series.
He tells me they are not even bringing RX8's into the country anymore .
Seems that anyone with 1/2 a brain is buying them straight out of Japan 2nd hand .
New in NZ : $65,000
near new ex japan : $35,000
You can see why ......

Razz1

Your pretty funny!

zoom44

well- John Doonan of Mazdaspeed Motorsports is in cali. actually i think he has a new title now- Mazdaspeed Developement Manager or something like that. we'll see him at SSX this weekend

cavemancan

I'm detecting sarcasm...

sosonic

The new Mazdaspeed Development Manager (or whatever) needs to be put on trial for his sins and those of his predecessors for there being no Mazdaspeed RX-8.

If he fails to repent and request development of a Mazdaspeed RX-8 from Mazda rotary-hating top brass, than he should be publicly stoned immediately and forced to resign.

ULLLOSE

iTrader: (1)

Well if you read GRM you have seen the Mazdaspeed ad that has ran for the last year with an RX-8 racing in it. That is our car, and the dealer has never turned down any of our warranty work. A lot of it is just how you talk to people.

I do know of one racer, not me, that did get a trans done under warranty just a few weeks ago.