RX-8 Track test , report and pics .
#1
![Smile](https://www.rx8club.com/images/icons/icon7.gif)
Hi All ,
l have posted pics and the full write up on our Mazdarotaryclub.com forum of an article theat came out yesterday in an English Mag called Autocar of the RX-8 on track in Japan , there is also a tech side bar on the engine . Sorry l didn't put them up in here , not that good on these pewtery things in fact l gave up trying on our site and got a mate to install em for me !!
All the Best Clive@mazdarotaryclub.com
l have posted pics and the full write up on our Mazdarotaryclub.com forum of an article theat came out yesterday in an English Mag called Autocar of the RX-8 on track in Japan , there is also a tech side bar on the engine . Sorry l didn't put them up in here , not that good on these pewtery things in fact l gave up trying on our site and got a mate to install em for me !!
All the Best Clive@mazdarotaryclub.com
#2
Certifiable car nut
Join Date: Apr 2002
Location: Toronto, Canada
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Direct link: http://www.mazdarotaryclub.com/forum...p?threadid=174
I haven't had time to read it yet, but I'm not holding out much hope - they are showing the old yellow car in the article!
I haven't had time to read it yet, but I'm not holding out much hope - they are showing the old yellow car in the article!
#3
I hate to say it but it looks like they were driving the concept. The seats, design of the front and the led lights on the sideview mirrors just scream concept. On positive note the car sounds like itsvery refined and quiet which is a sign that some of us can mod for more performance at the cost of a loud sounding engine by adding free intakes and exhaust systems
#5
"At high revs, attained with eerie ease it must be noted, the only thing that deters you from revving past the red line and up to 9000 rpm and beyond is an annoying - but necessary - ringing sound..." :D
#7
Administrator
i took some time yesterday and posted the newer pics (turn signals, bigger ducts etc.) over at mazdarotaryclub.com so they could see the difference. most of the posts so far have been about the plastic over the engine
#8
Certifiable car nut
Join Date: Apr 2002
Location: Toronto, Canada
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Some good hard data can be found in this article. Even though they show the old car, it sounds like what they drove was the new one. Excellent find. Most note-worthy:
Turns lock-to-lock: 3.0 . That's a bit high, I would have prefered 2.5-2.7 turns. Oh well, BMW uses 3.4 turns lock-to-lock, and it's steering feel plenty precise, so I am probably nit-picking. At least @3.0 turns lock-to-lock it won't feel as darty as my current car on the freeway.
Weight: 1300 kg estimated (2860 lb.) If this is correct, the car has lost a bit of weight (130 lb.)! Always good news!
Fuel economy, combined driving: 28-30 MPG. Methinks this is a little overly optimistic. :D One can hope though. I wonder where they got this number from?
It does say at the bottom of the data box is small print "All figures manufacturer's claims" so either Mazda has come out with some crazy breakthrough or its a misprint.
Brakes: 4 piston calipers, ventilated discs, 323 mm front, 302 mm rear
The link to the third page is wrong. Use this link: http://www.mazdarotaryclub.com/forum...autocar_03.JPG
Interestingly, this article also suggests the rear seat is cramped for full-size adults.
"Steering wheel adjusts in both planes" - does this mean it tilts and telescopes?
Power steering assist is electric, as in the S2000! Didn't know they were going to forego the usual hydraulic pump! (Maybe I missed that somehow over the past few months.) The author liked the steering feel a lot.
I suggest making this thread a sticky.
Turns lock-to-lock: 3.0 . That's a bit high, I would have prefered 2.5-2.7 turns. Oh well, BMW uses 3.4 turns lock-to-lock, and it's steering feel plenty precise, so I am probably nit-picking. At least @3.0 turns lock-to-lock it won't feel as darty as my current car on the freeway.
Weight: 1300 kg estimated (2860 lb.) If this is correct, the car has lost a bit of weight (130 lb.)! Always good news!
Fuel economy, combined driving: 28-30 MPG. Methinks this is a little overly optimistic. :D One can hope though. I wonder where they got this number from?
![Confused](https://www.rx8club.com/images/smilies/confused.gif)
Brakes: 4 piston calipers, ventilated discs, 323 mm front, 302 mm rear
The link to the third page is wrong. Use this link: http://www.mazdarotaryclub.com/forum...autocar_03.JPG
Interestingly, this article also suggests the rear seat is cramped for full-size adults.
"Steering wheel adjusts in both planes" - does this mean it tilts and telescopes?
Power steering assist is electric, as in the S2000! Didn't know they were going to forego the usual hydraulic pump! (Maybe I missed that somehow over the past few months.) The author liked the steering feel a lot.
I suggest making this thread a sticky.
#9
Originally posted by Grimace
Some good hard data can be found in this article. Even though they show the old car, it sounds like what they drove was the new one. Excellent find. Most note-worthy:
Turns lock-to-lock: 3.0 . That's a bit high, I would have prefered 2.5-2.7 turns. Oh well, BMW uses 3.4 turns lock-to-lock, and it's steering feel plenty precise, so I am probably nit-picking. At least @3.0 turns lock-to-lock it won't feel as darty as my current car on the freeway.
Weight: 1300 kg estimated (2860 lb.) If this is correct, the car has lost a bit of weight (130 lb.)! Always good news!
Fuel economy, combined driving: 28-30 MPG. Methinks this is a little overly optimistic. :D One can hope though. I wonder where they got this number from?
It does say at the bottom of the data box is small print "All figures manufacturer's claims" so either Mazda has come out with some crazy breakthrough or its a misprint.
Brakes: 4 piston calipers, ventilated discs, 323 mm front, 302 mm rear
The link to the third page is wrong. Use this link: http://www.mazdarotaryclub.com/forum...autocar_03.JPG
Interestingly, this article also suggests the rear seat is cramped for full-size adults.
"Steering wheel adjusts in both planes" - does this mean it tilts and telescopes?
Power steering assist is electric, as in the S2000! Didn't know they were going to forego the usual hydraulic pump! (Maybe I missed that somehow over the past few months.) The author liked the steering feel a lot.
I suggest making this thread a sticky.
Some good hard data can be found in this article. Even though they show the old car, it sounds like what they drove was the new one. Excellent find. Most note-worthy:
Turns lock-to-lock: 3.0 . That's a bit high, I would have prefered 2.5-2.7 turns. Oh well, BMW uses 3.4 turns lock-to-lock, and it's steering feel plenty precise, so I am probably nit-picking. At least @3.0 turns lock-to-lock it won't feel as darty as my current car on the freeway.
Weight: 1300 kg estimated (2860 lb.) If this is correct, the car has lost a bit of weight (130 lb.)! Always good news!
Fuel economy, combined driving: 28-30 MPG. Methinks this is a little overly optimistic. :D One can hope though. I wonder where they got this number from?
![Confused](https://www.rx8club.com/images/smilies/confused.gif)
Brakes: 4 piston calipers, ventilated discs, 323 mm front, 302 mm rear
The link to the third page is wrong. Use this link: http://www.mazdarotaryclub.com/forum...autocar_03.JPG
Interestingly, this article also suggests the rear seat is cramped for full-size adults.
"Steering wheel adjusts in both planes" - does this mean it tilts and telescopes?
Power steering assist is electric, as in the S2000! Didn't know they were going to forego the usual hydraulic pump! (Maybe I missed that somehow over the past few months.) The author liked the steering feel a lot.
I suggest making this thread a sticky.
Besides 98% of the time I'll be driving alone, and as long as people can come with me I really don't care much for their comfort :P
#12
Registered User
Join Date: Sep 2002
Location: North Central WV
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I guess I'm just in a pessemistic mood tonight, but in the article the author said that he kept swinging past the redline and as a result, the "rotor tip seals" broke. I know that he was probably really pushing the car to test its performance but isn't it still a bad sign that he managed to damage the engine in just 4 laps? Seeing as the peak horsepower of the car is way up in the high rev range wouldn't it be easy for anyone to fly past the redline? I know that if I do get this car, I'll probably never try to push it right to its limits but seeing as I could easily make a few mistakes, what are the chances of me damaging the engine?
#14
It appears that the author who wrote the section:
"...and several times during my test drive the needle sailed past 9000 before my resolve and the engine's rotor tip seals broke."
really didn't know what he was talking about. Since the article is from Autocar UK, it may be a slang or translation problem to the "English" that I understand. Does anyone from the UK understand what that means?
He clearly could not have broken the apex seals several times or even once.
Brian
"...and several times during my test drive the needle sailed past 9000 before my resolve and the engine's rotor tip seals broke."
really didn't know what he was talking about. Since the article is from Autocar UK, it may be a slang or translation problem to the "English" that I understand. Does anyone from the UK understand what that means?
He clearly could not have broken the apex seals several times or even once.
Brian
Last edited by Buger; 11-13-2002 at 11:25 PM.
#15
Registered User
Join Date: Oct 2002
Location: Minnesota
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
yea i dont know what i was talking about i thought i put a question mark at the end of my sentence
so to repost
the guy who tested it sent the needle past 9000 and broke the rotor tip seals ?
so to repost
the guy who tested it sent the needle past 9000 and broke the rotor tip seals ?
![Confused](https://www.rx8club.com/images/smilies/confused.gif)
#16
Originally posted by Hercules
They also say it's cramped in a 3 series BMW, but I fit back there okay... granted it's not a full-size sedan but it serves its purpose.
Besides 98% of the time I'll be driving alone, and as long as people can come with me I really don't care much for their comfort :P
They also say it's cramped in a 3 series BMW, but I fit back there okay... granted it's not a full-size sedan but it serves its purpose.
Besides 98% of the time I'll be driving alone, and as long as people can come with me I really don't care much for their comfort :P
l sat in the toy yellow show car back in July and was real impressed by the leg room front and back, the way they appear to have achived is constucting very thin front seats.
Hope this helps.
All the Best Clive@mazdarotaryclub.com
#17
Certifiable car nut
Join Date: Apr 2002
Location: Toronto, Canada
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Buger
It appears that the author who wrote the section:
"...and several times during my test drive the needle sailed past 9000 before my resolve and the engine's rotor tip seals broke."
really didn't know what he was talking about. Since the article is from Autocar UK, it may be a slang or translation problem to the "English" that I understand. Does anyone from the UK understand what that means?
He clearly could not have broken the apex seals several times or even once.
Brian
It appears that the author who wrote the section:
"...and several times during my test drive the needle sailed past 9000 before my resolve and the engine's rotor tip seals broke."
really didn't know what he was talking about. Since the article is from Autocar UK, it may be a slang or translation problem to the "English" that I understand. Does anyone from the UK understand what that means?
He clearly could not have broken the apex seals several times or even once.
Brian
#18
Originally posted by Grimace
Turns lock-to-lock: 3.0 . That's a bit high, I would have prefered 2.5-2.7 turns. Oh well, BMW uses 3.4 turns lock-to-lock, and it's steering feel plenty precise, so I am probably nit-picking. At least @3.0 turns lock-to-lock it won't feel as darty as my current car on the freeway.
Turns lock-to-lock: 3.0 . That's a bit high, I would have prefered 2.5-2.7 turns. Oh well, BMW uses 3.4 turns lock-to-lock, and it's steering feel plenty precise, so I am probably nit-picking. At least @3.0 turns lock-to-lock it won't feel as darty as my current car on the freeway.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#19
Moderator
Join Date: Jul 2002
Location: London (England)
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
English translation alert...
They guy meant that he got over 9000RPM several times before he chickened out because he was WORRIED that he MIGHT break somthing... It doesn't suggest that he DID brake somthing.... Infact it suggests that he had a good try and nothing did break.
Edit: - Didn't they say that the production version would redline at 9000 and the buzzer would be at 9500... I really doubt that they would let you take it anywhere near the speed that could hurt it... I'd guess that the buzzer also has a rev limit on it... or at least that there is a rev limit below 10K.
They guy meant that he got over 9000RPM several times before he chickened out because he was WORRIED that he MIGHT break somthing... It doesn't suggest that he DID brake somthing.... Infact it suggests that he had a good try and nothing did break.
Edit: - Didn't they say that the production version would redline at 9000 and the buzzer would be at 9500... I really doubt that they would let you take it anywhere near the speed that could hurt it... I'd guess that the buzzer also has a rev limit on it... or at least that there is a rev limit below 10K.
Originally posted by Takumi
the guy who tested it sent the needle past 9000 and broke the rotor tip seals ?
the guy who tested it sent the needle past 9000 and broke the rotor tip seals ?
![Confused](https://www.rx8club.com/images/smilies/confused.gif)
Last edited by BlueAdept; 11-14-2002 at 09:47 AM.
#20
Certifiable car nut
Join Date: Apr 2002
Location: Toronto, Canada
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by fuz
My car is 2.7 turns. It's been changed on all BMWs for 2002+. :p I like it this fast, though it feels a bit oversensitive for countersteering. Not that you should be drifting anyway.
My car is 2.7 turns. It's been changed on all BMWs for 2002+. :p I like it this fast, though it feels a bit oversensitive for countersteering. Not that you should be drifting anyway.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
But many of the cars in the test were well over 3 turns lock-to-lock, so I'm not worried. Every recent review of the 8 that has been popping up raves about the steering feel.
#21
Registered User
Join Date: Sep 2002
Location: Cupertino, CA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BlueAdept
Edit: - Didn't they say that the production version would redline at 9000 and the buzzer would be at 9500... I really doubt that they would let you take it anywhere near the speed that could hurt it... I'd guess that the buzzer also has a rev limit on it... or at least that there is a rev limit below 10K.
Edit: - Didn't they say that the production version would redline at 9000 and the buzzer would be at 9500... I really doubt that they would let you take it anywhere near the speed that could hurt it... I'd guess that the buzzer also has a rev limit on it... or at least that there is a rev limit below 10K.
Based on that, I'd guess that there is considerable room designed in above the redline, and brief or accidental excursions beyond the redline should not cause any damage.
Edit: Here is the link to the thread, if you are interested:
http://www.rx7club.com/forum/showthr...ighlight=owned
Last edited by RedRotaryRocket; 11-18-2002 at 03:06 PM.
#23
Registered User
Join Date: Sep 2002
Location: Cupertino, CA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by pelucidor
A very dumb newbie question here - can rotaries have a rev-limiter (instead of buzzer)?
A very dumb newbie question here - can rotaries have a rev-limiter (instead of buzzer)?
#25
Registered User
Join Date: Sep 2002
Location: Cupertino, CA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Aesculapius
Isn't a rev limiter just a fuel cut off switch attached to a data feed from the tach?
Isn't a rev limiter just a fuel cut off switch attached to a data feed from the tach?