3 rotor RX8 engine bay progress
11-13-2011, 11:25 PM
#1053
angeljoelv
Thread Starter
let me know if you go. Ive been wanting to go for a while, but its so freaking far. If you go let me know. I might try to make it, a group is always better for the long trips. I have to trailer the car thought. E85 is not available everywhere.
Last edited by angeljoelv; 11-13-2011 at 11:27 PM.
11-14-2011, 06:44 AM
#1054
Registered
Join Date: Apr 2009
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
Hmmmzz... Ive been meaning to ask this...
With all that ceramic wrapping... The power and heat that u will be extracting, do u take extra care when u see puddles of water or let it cool down first before a car wash?
ie, so that u prevent the thing from cracking faster over time...
With all that ceramic wrapping... The power and heat that u will be extracting, do u take extra care when u see puddles of water or let it cool down first before a car wash?
ie, so that u prevent the thing from cracking faster over time...
11-14-2011, 02:33 PM
#1055
angeljoelv
Thread Starter
Hmmmzz... Ive been meaning to ask this...
With all that ceramic wrapping... The power and heat that u will be extracting, do u take extra care when u see puddles of water or let it cool down first before a car wash?
ie, so that u prevent the thing from cracking faster over time...
With all that ceramic wrapping... The power and heat that u will be extracting, do u take extra care when u see puddles of water or let it cool down first before a car wash?
ie, so that u prevent the thing from cracking faster over time...
Cant have to much fun in the rain.
11-14-2011, 07:10 PM
#1058
angeljoelv
Thread Starter
Im trying to get a friend of mine that has a 3 car enclosed trailer to come. He is also a rotary guy and has some toys of his own. If not Ill freaking buy a trailer..
11-15-2011, 10:20 PM
#1061
i'm in love
11-17-2011, 08:44 PM
#1062
angeljoelv
Thread Starter
update on the other two projects
100 shot for the cobra on the works
and Haltech wiring on the 3rd gen on the works. piping will be powder coated and getting wiggins clamps.
100 shot for the cobra on the works
and Haltech wiring on the 3rd gen on the works. piping will be powder coated and getting wiggins clamps.
Last edited by angeljoelv; 11-17-2011 at 09:26 PM.
speachless! absolutly amazing!!
11-23-2011, 09:14 AM
#1066
When wiring the Haltech for the rad fans you can ditch all the relays up front and use 2 bosch 5 pin relays and control the fans via the DPO outputs. You will have to pull the power source from one of the relays (blue wire 10 guage) or run a new wire from the 60 amp fuse in the fuse box on the drivers side. This will allow you to control both fans at the temps you desire and get rid of all the stock wiring. I can draw up a wiring diagram if needed.
Feel free to pm me if you have any questions about setting up the haltech in the FD. I am finishing up a PS1000 in a t04z and then my personal FD is getting the same computer to keep up w/ the S475 I am running.
Feel free to pm me if you have any questions about setting up the haltech in the FD. I am finishing up a PS1000 in a t04z and then my personal FD is getting the same computer to keep up w/ the S475 I am running.
11-23-2011, 10:33 AM
#1067
Uncontrollable drifter
11-27-2011, 10:56 PM
#1068
angeljoelv
Thread Starter
When wiring the Haltech for the rad fans you can ditch all the relays up front and use 2 bosch 5 pin relays and control the fans via the DPO outputs. You will have to pull the power source from one of the relays (blue wire 10 guage) or run a new wire from the 60 amp fuse in the fuse box on the drivers side. This will allow you to control both fans at the temps you desire and get rid of all the stock wiring. I can draw up a wiring diagram if needed.
Feel free to pm me if you have any questions about setting up the haltech in the FD. I am finishing up a PS1000 in a t04z and then my personal FD is getting the same computer to keep up w/ the S475 I am running.
Feel free to pm me if you have any questions about setting up the haltech in the FD. I am finishing up a PS1000 in a t04z and then my personal FD is getting the same computer to keep up w/ the S475 I am running.
12-08-2011, 11:19 PM
#1072
angeljoelv
Thread Starter
12-15-2011, 11:35 PM
#1073
angeljoelv
Thread Starter
Going with flat black mesh, gloss black lip, bolts are staying polished and I brushed the lug nut holes. They always get scratched so I figures its better and it will give it a little different look.
Last edited by angeljoelv; 12-15-2011 at 11:41 PM.