Autoexe carbon Fibre front Splitter installed on my 8
06-10-2007 | 01:14 PM
#34
That is my favorite kit for the 8. Keeps it clean and stock with just enough extra to set it apart, and although it might not do much, I'm sure that lip does more than most aftermarket fronts.
06-11-2007 | 12:42 AM
#36
Don't own an Rx-8.
Joined: Jul 2006
Posts: 314
Likes: 0
From: Atlanta, GA
That kit kicks ***. If you had a small CF "sitting-on-top-of-the-trunk" or maybe a 1 to 3 inch high wing/spoiler, it'd really tie it all together as a good looking, functional light racing aero-kit.
06-11-2007 | 12:56 AM
#37
Registered User
Joined: Nov 2006
Posts: 276
Likes: 0
From: san antonio
http://japanparts.com/db/partslist.p...dle=2&small=11
here for $582
here for $582
06-11-2007 | 01:08 AM
#38
Thread Starter
Nightmares be gone...!!!
Joined: Aug 2006
Posts: 648
Likes: 0
From: K.L, Malaysia
Oh well.....its cheaper there....BUT, customs here charge 40% duty over the purchase price.......
I think i'll make my future purchases via Japanparts anyways........ Depending on availability over here in Malaysia of course...... If Japanparts.com could deliver faster, than by all means i'll buy it thrugh them.
I think i'll make my future purchases via Japanparts anyways........ Depending on availability over here in Malaysia of course...... If Japanparts.com could deliver faster, than by all means i'll buy it thrugh them.
Last edited by effie; 06-11-2007 at 01:11 AM.
06-11-2007 | 02:06 AM
#40
Thread Starter
Nightmares be gone...!!!
Joined: Aug 2006
Posts: 648
Likes: 0
From: K.L, Malaysia
I took those stripes off the same day i took those pics......
I'm still deciding on what to do bout the sides..... Maybe RE-Amemiya sides or INGS sides.....
As for the rear, KENSTYLE perhaps..... still need to make my mind up......
02-11-2008 | 12:14 PM
#43
Thread Starter
Nightmares be gone...!!!
Joined: Aug 2006
Posts: 648
Likes: 0
From: K.L, Malaysia
02-11-2008 | 01:04 PM
#44
S-Turns + RX8 = Zoom-Zoom
Joined: Mar 2006
Posts: 178
Likes: 0
From: somewhere in NJ
Very Nice
I love that AutoExe CF front Splitter
How much clearance off the ground do you get with that front?
Is the clearance that big of a difference from the appearance pac. front?
If not i might be very tempted to join this rare club
I love that AutoExe CF front Splitter
How much clearance off the ground do you get with that front?
Is the clearance that big of a difference from the appearance pac. front?
If not i might be very tempted to join this rare club
02-12-2008 | 01:13 AM
#46
Registered User
Joined: Mar 2004
Posts: 365
Likes: 0
From: Tokyo JAPAN
Japanparts replies
Oh yeah....1 comment bout the AutoEXE lip......
Fitment was PERFECT...... only took me 15mins to install..... Mounts into stock bumper lower wheel-well bumper inner wheel cover mounts (need to replace plastic clip with bolt 'n' nut)....... Whole lip just slides on with no distortion at all....
Gotta hand it to the guys from AutoEXE..... Quality is TOP NOTCH !!!!
Fitment was PERFECT...... only took me 15mins to install..... Mounts into stock bumper lower wheel-well bumper inner wheel cover mounts (need to replace plastic clip with bolt 'n' nut)....... Whole lip just slides on with no distortion at all....
Gotta hand it to the guys from AutoEXE..... Quality is TOP NOTCH !!!!
http://www.japanparts.com/db/partsli...ey=146-209-001
We can supply this Part anywhere in the World; and we offer a 10% Discount off our website parts pricing to Forum members
PM me to followup!
GW
JapanpartsLLC
*Since 1996*
Last edited by Japanparts.com; 02-12-2008 at 01:17 AM.
02-12-2008 | 03:32 AM
#47
Spastic Monkey
Joined: Mar 2006
Posts: 414
Likes: 0
From: Kirkland
My 2005 that had the full AutoExe CF kit is now totaled and (hopefully) resting peacefully somewhere. Suddenly it's that much more rare on this forum. I'm being "lame" and going with the Mazdaspeed kit on my 2008.
02-12-2008 | 11:03 PM
#49
S-Turns + RX8 = Zoom-Zoom
Joined: Mar 2006
Posts: 178
Likes: 0
From: somewhere in NJ
It's about the same. You just need to be aware that it sticks out further so approaching those big driveway curbs has to be done at an angle or you'll shred it.
My 2005 that had the full AutoExe CF kit is now totaled and (hopefully) resting peacefully somewhere. Suddenly it's that much more rare on this forum. I'm being "lame" and going with the Mazdaspeed kit on my 2008.
My 2005 that had the full AutoExe CF kit is now totaled and (hopefully) resting peacefully somewhere. Suddenly it's that much more rare on this forum. I'm being "lame" and going with the Mazdaspeed kit on my 2008.
i'll have to keep the driveway thing in mind before i do get the autoexe cf splitter
So Sorry to hear about your 1st 8
and the MS kit is still a very nice looking kit.
02-12-2008 | 11:25 PM
#50
It's about the same. You just need to be aware that it sticks out further so approaching those big driveway curbs has to be done at an angle or you'll shred it.
My 2005 that had the full AutoExe CF kit is now totaled and (hopefully) resting peacefully somewhere. Suddenly it's that much more rare on this forum. I'm being "lame" and going with the Mazdaspeed kit on my 2008.
My 2005 that had the full AutoExe CF kit is now totaled and (hopefully) resting peacefully somewhere. Suddenly it's that much more rare on this forum. I'm being "lame" and going with the Mazdaspeed kit on my 2008.
i had seibon replica and i managed to split mine in half on a parking stop, but regular scrapes on the road from driveways and speed bumps were not really a problem, it did scratch up the bottom a little but the lip remained intact, just dont hit it with anything straight on or the it'll crack in half between the V on your bumper and whatever your hitting