Photonn, LEBREN's latest offering
#28
@ Rotary-RX8 Fogs were removed, side markers were painted, and running were removed as well. The Photonn was installed in using the fog harness.
@rodjonathan For this reason, the time frame is important so not to cut any corners. I'm not going to lie, the project will take some effort to install while the end result will be great for SE3P owners! I have a list of other vehicles in mind should this mod be a success!
@rodjonathan For this reason, the time frame is important so not to cut any corners. I'm not going to lie, the project will take some effort to install while the end result will be great for SE3P owners! I have a list of other vehicles in mind should this mod be a success!
#30
Registered
All the high class vehicles are doing the signature LED thing now. Mercs have the lines on either side, Audis have them in the headlights... it is almost like an update for the rx8. Would buy one if the install isn't too intensive.
#31
Registered
iTrader: (15)
@ Rotary-RX8 Fogs were removed, side markers were painted, and running were removed as well. The Photonn was installed in using the fog harness.
@rodjonathan For this reason, the time frame is important so not to cut any corners. I'm not going to lie, the project will take some effort to install while the end result will be great for SE3P owners! I have a list of other vehicles in mind should this mod be a success!
@rodjonathan For this reason, the time frame is important so not to cut any corners. I'm not going to lie, the project will take some effort to install while the end result will be great for SE3P owners! I have a list of other vehicles in mind should this mod be a success!
and as for the tail light LEDs... hope you dont mean we have to bake them for the install, that would be unsettling
![Uhh](https://www.rx8club.com/images/smilies/uhh.gif)
#35
Ok lets see...
No problem with HID's, the Photonn uses very little current your vehicle won't even see extra load.
Tails (hint) won't need baking but some other tools are required. Can't reveal too much yet...
The Photonn replaces the front accent, uses a smoked lens and is very stealth for those wanting that stock look.
Installation will be VERY easy, on a scale of 1 to 5 with 1 being plug in and 5 being drilling/cutting this installation is a 2. With very little effort you can achieve a similar look to Audi, Mercedes, etc. At a fraction of the cost on the car you love!
Eren D
LEBREN
No problem with HID's, the Photonn uses very little current your vehicle won't even see extra load.
Tails (hint) won't need baking but some other tools are required. Can't reveal too much yet...
The Photonn replaces the front accent, uses a smoked lens and is very stealth for those wanting that stock look.
Installation will be VERY easy, on a scale of 1 to 5 with 1 being plug in and 5 being drilling/cutting this installation is a 2. With very little effort you can achieve a similar look to Audi, Mercedes, etc. At a fraction of the cost on the car you love!
Eren D
LEBREN
#37
Hey guys, it's not looking good for the Group Buy
so I'll be offering these to anyone interested directly. As promised, The Photonn is NOW available so just contact me directly for your order! lebren@gmail.com I'll be taking day shots so you can see the awesomeness during the daytime.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#40
I HATE SPEEDBUMPS!
Thanks for the compliments guys, as far as tails go I'm not inclined to let the cat out the bag yet but Tail Lights will be round and have a unique look for sure! Expect more info around march/april!
I'll have more daytime pictures up this weekend of the Photonn.... Stay tuned!
I'll have more daytime pictures up this weekend of the Photonn.... Stay tuned!
Hurry up...cannot wait any more
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#41
Just a question that I'm sure has been covered. But since a lot of Lebren LED owners are in here, where better to ask?
Do both the rear and front lights require the OEM chrome rotor accent? I think I read above the front does not, but what about the rear?
Thanks, have been looking at options for the rear recently. Might as well do this too!
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Do both the rear and front lights require the OEM chrome rotor accent? I think I read above the front does not, but what about the rear?
Thanks, have been looking at options for the rear recently. Might as well do this too!
#45
Registered
iTrader: (15)
Just a question that I'm sure has been covered. But since a lot of Lebren LED owners are in here, where better to ask?
Do both the rear and front lights require the OEM chrome rotor accent? I think I read above the front does not, but what about the rear?
Thanks, have been looking at options for the rear recently. Might as well do this too!
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Do both the rear and front lights require the OEM chrome rotor accent? I think I read above the front does not, but what about the rear?
Thanks, have been looking at options for the rear recently. Might as well do this too!
rear .. yes
#46
Ok Gents, soon as I get home ill re-install the modified prototype and get some day shots. I've been pondering a clear lens if anyone wants insane light output!
UPDATE!! As promised, the much delayed daytime photos, some with upper LED's disabled which is an option with the Photonn!
![Name: IMG_4967.jpg
Views: 50
Size: 95.2 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248178d1501266278-photonn-lebrens-latest-offering-img_4967.jpg)
![Name: IMG_4973.jpg
Views: 67
Size: 73.3 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248179d1501266278-photonn-lebrens-latest-offering-img_4973.jpg)
![Name: IMG_4981.jpg
Views: 50
Size: 100.2 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248180d1501266278-photonn-lebrens-latest-offering-img_4981.jpg)
![Name: IMG_4996.jpg
Views: 79
Size: 90.2 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248181d1501266278-photonn-lebrens-latest-offering-img_4996.jpg)
![Name: IMG_5028.jpg
Views: 68
Size: 148.3 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248182d1501266278-photonn-lebrens-latest-offering-img_5028.jpg)
Thanks!
UPDATE!! As promised, the much delayed daytime photos, some with upper LED's disabled which is an option with the Photonn!
![Name: IMG_4967.jpg
Views: 50
Size: 95.2 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248178d1501266278-photonn-lebrens-latest-offering-img_4967.jpg)
![Name: IMG_4973.jpg
Views: 67
Size: 73.3 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248179d1501266278-photonn-lebrens-latest-offering-img_4973.jpg)
![Name: IMG_4981.jpg
Views: 50
Size: 100.2 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248180d1501266278-photonn-lebrens-latest-offering-img_4981.jpg)
![Name: IMG_4996.jpg
Views: 79
Size: 90.2 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248181d1501266278-photonn-lebrens-latest-offering-img_4996.jpg)
![Name: IMG_5028.jpg
Views: 68
Size: 148.3 KB](https://www.rx8club.com/attachments/rx-8-multimedia-photo-gallery-6/248182d1501266278-photonn-lebrens-latest-offering-img_5028.jpg)
Thanks!
Last edited by Lebren; 03-01-2011 at 10:41 PM. Reason: Added Photos
#48
Registered
iTrader: (15)
nice!
so let me get this straight.
its powered through the fog light harness, so it would go on when the fogs are on?
also do you have pics of the Photonn with the so called lens? day and night pics?
considering this Photonn is tough, because i would have to stick with the stock bumper rather than an aftermarket in the future.
so let me get this straight.
its powered through the fog light harness, so it would go on when the fogs are on?
also do you have pics of the Photonn with the so called lens? day and night pics?
considering this Photonn is tough, because i would have to stick with the stock bumper rather than an aftermarket in the future.