Pictures of my burnt clutch, and new clutch
#27
You went to AAMCO?
Of course they told you it was burnt - they wanted your money.
Your old plate was definitely NOT burned. Slightly worn, but normal.
If you had actually ever seen a bruned clutch, you would know this.
Enjoy your lightned wallet.
Of course they told you it was burnt - they wanted your money.
Your old plate was definitely NOT burned. Slightly worn, but normal.
If you had actually ever seen a bruned clutch, you would know this.
Enjoy your lightned wallet.
#28
The car didn't operate, it had to be towed. The pressure plate was also NOT normal, you have also not seen the other side of the clutch (I didn't feel like taking out out from the pressure plate, it's extremely dirty).
The pressure plate had the most damage.
The pressure plate had the most damage.
#29
What were the actual run-out numbers for the old clutch disc? How about the pressure plate?
Was the Marcel tested?
What was the machine depth on the new flywheel?
What pilot bearing did they use?
Was the Marcel tested?
What was the machine depth on the new flywheel?
What pilot bearing did they use?
#31
Originally Posted by Bart!
By the way, that's $700 with redline transmission gear oil, and a resurfaced flywheel and 50,000 mile warranty on labor.
I didn't purchase a new flywheel to avoid aftermarket parts that become essential to my warranty, hence if I needed a new transmission in the future - they could have refused to do it under warranty. Even though there is a rule stating they must prove that the damage to the transmission was done by the aftermarket product, if not they cannot refuse to replace the item.
I didn't purchase a new flywheel to avoid aftermarket parts that become essential to my warranty, hence if I needed a new transmission in the future - they could have refused to do it under warranty. Even though there is a rule stating they must prove that the damage to the transmission was done by the aftermarket product, if not they cannot refuse to replace the item.
it is not like brakes..
wait you have an aftermarket clutch in you car it voids you warranty.... i saw pics of it.
i had 4 mechs tell me i had a yeast infection and to drink cranberry juice...
as i said.
tard and his money.
beers
#33
o wait.
https://www.rx8club.com/showpost.php...5&postcount=40
wtf,
are you a tard that needs a mandatory helmet?????
wow.....
tards gone wild.
beers
https://www.rx8club.com/showpost.php...5&postcount=40
wtf,
are you a tard that needs a mandatory helmet?????
wow.....
tards gone wild.
beers
#34
Originally Posted by Bart!
... rofl your ******* retarded.
Yes I have a receipt, it was done at AAMCO. The clutch was ordered through Mazda.
Yes I have a receipt, it was done at AAMCO. The clutch was ordered through Mazda.
did not you just have a problem with this....... and i am not talking about a mm co.
beers
pick a story and stick to it..
#39
Originally Posted by swoope
are you refering to the color of the center of the disk????? that is not where the heat is....
and if you search it is that color to start.
when you burn a disk it has a very glazed over look... got shots of the pp and flywheel??????
how many miles when this happened. sorry i could search, but it is your thread.
beers
and if you search it is that color to start.
when you burn a disk it has a very glazed over look... got shots of the pp and flywheel??????
how many miles when this happened. sorry i could search, but it is your thread.
beers
1. Aren't taking your money.
2. Haven't already screwed you overlike AAMACO
3. Probably more knowledgable than the mechanics that just worked on your car from AAMACO, because obviously they messed something up in your tranny, or you wouldn't have warranty coverage trying get it fixed at Mazda.
Good Luck
#41
That clutch doesn't look burned at all - just...old and worn. If the disc shown were cleaned, it'd be easier to see how the whole thing is blue.
https://www.rx8club.com/showthread.p...ghlight=clutch
Nevermind how the clutch disc failed...note the colour?
https://www.rx8club.com/showthread.p...ghlight=clutch
Nevermind how the clutch disc failed...note the colour?
#47
Quit the flaming. The point of this forum is to help others as opposed to ridiculing them. The whole point of Swoope flaming is a futile attempt to impress other posters with his opinion of what's going on with a stranger's case. Tergiversate from your assholish ways and perhaps Bart! (probably reeling that he didn't know the information that he's being flooded with at this point before he made a purchase [not saying he shouldn't have researched it beforehand]) will learn from this.
Garner some maturity, all of you.
Peace bitches.
Garner some maturity, all of you.
Peace bitches.
Last edited by _Michael; 01-03-2006 at 10:47 AM.
#48
Maybe people should have thicker skin? That way, we could all have FUN flaming.
Know what Brett Favre said after GB won the coin-toss before the Seahawks/Packers game last sunday?
"We want the ball and we're going to score."
Hasselbeck didn't call in a moderator to 'warn' Brett...he laughed it off.
:D
Know what Brett Favre said after GB won the coin-toss before the Seahawks/Packers game last sunday?
"We want the ball and we're going to score."
Hasselbeck didn't call in a moderator to 'warn' Brett...he laughed it off.
:D
#50
Originally Posted by _Michael
Quit the flaming. The point of this forum is to help others as opposed to ridiculing them. The whole point of Swoope flaming is a futile attempt to impress other posters with his opinion of what's going on with a stranger's case. Tergiversate from your assholish ways and perhaps Bart! (probably reeling that he didn't know the information that he's being flooded with at this point before he made a purchase [not saying he shouldn't have researched it beforehand]) will learn from this.
Garner some maturity, all of you.
Peace bitches.
Garner some maturity, all of you.
Peace bitches.
it degraded after a bit, but i think this was initiated by the poster...