Rx8 Stock vs Rx8 Greddy
#27
Registered
Originally Posted by dmp
My point is, unless you pulled the motor, then dyno'd, the engine's crank HP is unknown.
IF the rx8 really makes 238hp, and dynos at 185, that's a 23% loss. If you showed 245whp on the dyno, that could be 301HP at the crank. then again...nobody really knows the drivetrain loss this car suffers.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
IF the rx8 really makes 238hp, and dynos at 185, that's a 23% loss. If you showed 245whp on the dyno, that could be 301HP at the crank. then again...nobody really knows the drivetrain loss this car suffers.
#28
Stuck in a love triangle
I don't understand why people always have the camera man in the SLOWER car when they film these videos. The slower car should not have the extra weight in it...the faster car should.
#29
Originally Posted by rotarygod
I'm glad someone brought that up. It bugs me when people try to quote a crank number from a chassis dyno. It just doesn't work and chances are doesn't even get close.
It was mesured by putting the car into neutro after the pull and let it roll until it stops, then you mesure the counter force that the transmition make and add that number to the wheel numbers.
That way you get an aprox. number on the crank. the only diference is that you don't mesure the 5th gear "weight" but it's almoust 1:1 rate. so it's not much diference than the gear box in neutro.
#30
Spin Triangles! Spin!
Join Date: Mar 2005
Location: Texas, US
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
I think it would be cool to see a nitrous 8 vs a turbo 8. That would be a nice camparison. I am curious at how far off using nitrous is than let's say a Greddy turbo kit. Doesn't seem like there would be a big difference, but I guess we'd have to see.
________
LIVE SEX WEBSHOWS
________
LIVE SEX WEBSHOWS
Last edited by dmorales; 09-09-2011 at 02:20 AM.
#31
RX8 and a Truk....
Originally Posted by dmorales
I think it would be cool to see a nitrous 8 vs a turbo 8. That would be a nice camparison. I am curious at how far off using nitrous is than let's say a Greddy turbo kit. Doesn't seem like there would be a big difference, but I guess we'd have to see.
Easy outcome - the Turbo 8 would SMOKE the N2O 8, if the race lasted more than about 90 seconds...
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#35
Registered User
i would love to see a dyno chart of that 8, but nevertheless, it pulls like a champ. i am gonna put it up on myspace page, unless of course ya have a problem with that.
www.myspace.com/zoomzoom_8
www.myspace.com/zoomzoom_8
#37
Registered User
if he is rolling out with that much to the rear wheels, the z is over in my opinion.
i have never seen a z on the "track" so not sure for me, i am probably around 245-260 rw, i am still running the emanage, interceptor is in the living room floor though, so soon enough i will have something worth tuning and dynoing. i know mine is fast as h*ll though, well was, before i busted the throttle body with a overboost
i have never seen a z on the "track" so not sure for me, i am probably around 245-260 rw, i am still running the emanage, interceptor is in the living room floor though, so soon enough i will have something worth tuning and dynoing. i know mine is fast as h*ll though, well was, before i busted the throttle body with a overboost
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#39
Banned
iTrader: (3)
Originally Posted by zoomzoom_8
... before i busted the throttle body with a overboost ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
You do realize that is the same TB that they are using on the Mustang, right?
There are people putting 20+ PSI through that thing with no issues. Of all the things you can break, the throttle body is the least likely. In fact, you are more likely to crack the upper intake manifold before you damage the TB.
So, what are the symptoms? What has led you to this conclusion? Pics? Did you strip the stepper or actually bend the butterfly?
#43
Registered User
Originally Posted by MazdaManiac
Before you did what?
You do realize that is the same TB that they are using on the Mustang, right?
There are people putting 20+ PSI through that thing with no issues. Of all the things you can break, the throttle body is the least likely. In fact, you are more likely to crack the upper intake manifold before you damage the TB.
So, what are the symptoms? What has led you to this conclusion? Pics? Did you strip the stepper or actually bend the butterfly?
You do realize that is the same TB that they are using on the Mustang, right?
There are people putting 20+ PSI through that thing with no issues. Of all the things you can break, the throttle body is the least likely. In fact, you are more likely to crack the upper intake manifold before you damage the TB.
So, what are the symptoms? What has led you to this conclusion? Pics? Did you strip the stepper or actually bend the butterfly?
idle was at 1500 and jumping to 2000, running really rich when driving, used a 1/4 of a tank of gas in about 25 miles, misses under a load, fouling plugs.
they think it jumped the stepper motor teeth, i dunno, the boost gauge only said like 9.5 psi, but it was pretty much vacuum then 9.5 psi, the turbo i am running hits full boost with the lightest pressure on the accelator.
had a thread about it, for those who blew an engine, i wondered where ya were back then, i wanted your advice
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
this make sense?
#44
Banned
iTrader: (3)
I'm always here - you can always e-mail me.
The likelyhood that 10 PSI will cram the TB butterfly is pretty slim. Maybe the IAC. I don't know. I'll have to take mine apart sometime.
However, try pushing it with your finger sometime. 10 psi is about the same as the pressure you would exert to ring a doorbell.
The likelyhood that 10 PSI will cram the TB butterfly is pretty slim. Maybe the IAC. I don't know. I'll have to take mine apart sometime.
However, try pushing it with your finger sometime. 10 psi is about the same as the pressure you would exert to ring a doorbell.
#45
Originally Posted by zoomzoom_8
i would love to see a dyno chart of that 8, but nevertheless, it pulls like a champ. i am gonna put it up on myspace page, unless of course ya have a problem with that.
www.myspace.com/zoomzoom_8
www.myspace.com/zoomzoom_8
![](http://img509.imageshack.us/img509/8240/7psisetup6kc.jpg)
#46
i don't like to post videos at high speed at open roads
if it's a problem please be free to delete it.
here is another comparo, a highly tuned WRX (unichip+boost 14psi+invidia exhaust... up pipe; downpipe, catless mid pipe, etc... note that the subaru's sound is a lot higher that the catless turbo rx8.)
before someone asks the engine check lite flashes. it reads misfire when the cars runs WOT. but no other error now.
The Wrx hits gas first. I WASNT at 9psi on this video. I've seen this subaru smoking a light Tuned Evo VII.
And someone asked if my car can keep up against an tuned Z. If it's not a Turbo/nitro etc Z .... it's simply not a race.
Video here.
if it's a problem please be free to delete it.
here is another comparo, a highly tuned WRX (unichip+boost 14psi+invidia exhaust... up pipe; downpipe, catless mid pipe, etc... note that the subaru's sound is a lot higher that the catless turbo rx8.)
before someone asks the engine check lite flashes. it reads misfire when the cars runs WOT. but no other error now.
The Wrx hits gas first. I WASNT at 9psi on this video. I've seen this subaru smoking a light Tuned Evo VII.
And someone asked if my car can keep up against an tuned Z. If it's not a Turbo/nitro etc Z .... it's simply not a race.
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
Video here.
#47
Originally Posted by kw1k
how fast were you guys going
the new video we went a little bit faster because the wrx was a match.
#49
Originally Posted by BrasilianRx8_2
on that video the Turbo has "only" 290bhp on the crank!!!!
I don't have a compraro against the 357bhp. Now i am on evo's and wrx league!![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Boring](https://www.rx8club.com/images/smilies/boring.gif)
I don't have a compraro against the 357bhp. Now i am on evo's and wrx league!
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Rock](https://www.rx8club.com/images/smilies/rock.gif)
I'm not too sure about sti's but I'm sure that a 330whp rx8 will put up a really nice fight against evo IX's with Turboback exhaust, boost controller, and tune.
There was another IX with dp, stock cat, catback, boost controller, tune that made 340whp or so. Congratulations!! That thing must be a beast.
Now its time to put my mods on...
#50
Registered
Join Date: Aug 2004
Location: Virginia/Maryland
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
That thing would whoop up on a stock sti. Stock STI's are only 300hp at the engine so I would guess 250hp at the wheels. Plus the 8's extra rev range helps since you can hold gears longer.
Last edited by rkostolni; 01-09-2006 at 01:15 PM.