Notices
RX-8 Multimedia/Photo Gallery Share your pics,videos or links to them.

Stance GR+ install.. (image heavy)

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-12-2009, 09:38 AM
  #1  
Trust me, you're wrong
Thread Starter
iTrader: (1)
 
tiresmoker's Avatar
 
Join Date: Feb 2008
Location: Youngstown, Oh
Posts: 779
Likes: 0
Received 0 Likes on 0 Posts
Stance GR+ install.. (image heavy)

I really haven't posted any pictures of the car here (other then the girlfriends/wives with 8's thread) but I figured this needed posted.

This past weekend I installed a set of Stance GR+ coilovers, and I must say the car handles like a freakin dream. I can't wait to see how she'll do at autocrosses now. She's about 1 1/2" lower in the rear and about 2" in the front. Surprisingly the spring rates aren't as bad as I thought they would be. Right now the dampers are set to about half stiff, and she handles perfectly. Body roll has been eliminated and she doesn't nose dive under heavy braking conditions.

Oh, and forgive the slightly blurry pics (some of them) My girlfriend was taking them during the install and she has an injured thumb right now.

More pics will be taken once the car has been cleaned.


Durning the install:














Before:



After:














Old 05-12-2009, 10:09 AM
  #2  
mkuhnracing.com
iTrader: (3)
 
TopGear8's Avatar
 
Join Date: Jun 2007
Location: Charlotte, NC
Posts: 6,212
Likes: 0
Received 4 Likes on 4 Posts
Looks great man! The GR+ is a very nice coilover. Your stance is very nice with those stance coilovers
Old 05-12-2009, 10:11 AM
  #3  
Hit & Run Magnet
iTrader: (3)
 
kersh4w's Avatar
 
Join Date: May 2007
Location: DC Area
Posts: 6,690
Likes: 0
Received 3 Likes on 3 Posts
this would be REALLY complimented by some 15-20mm spacers.
Old 05-12-2009, 10:41 AM
  #4  
wfc#046
 
enthegen's Avatar
 
Join Date: Jan 2008
Location: Alabama
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
^+1
I agree it would really set it off to flush out the wheels. Other than that looks awesome
Old 05-12-2009, 10:44 AM
  #5  
ლ(ಠ益ಠლ)
iTrader: (4)
 
L337fpc's Avatar
 
Join Date: Sep 2008
Location: Franeke
Posts: 2,367
Received 6 Likes on 4 Posts
freaking sweet! nice work and nice drop!
Old 05-12-2009, 10:49 AM
  #6  
100% baller (finally!)
iTrader: (7)
 
dondo's Avatar
 
Join Date: Jun 2007
Location: Seattle, WA
Posts: 5,385
Received 2 Likes on 2 Posts
very nice drop. looks great man.
Old 05-12-2009, 11:55 AM
  #7  
Trust me, you're wrong
Thread Starter
iTrader: (1)
 
tiresmoker's Avatar
 
Join Date: Feb 2008
Location: Youngstown, Oh
Posts: 779
Likes: 0
Received 0 Likes on 0 Posts
Thanks guys. I've alredy been thinking about wheel spacers for some time now. The wheels are a +40 offset right now with a 225 45 18, I'm thinking another 10mm or so should do just fine.

As it sits without the rear fenders rolled I'm about 5/8" from the inside lip, so they definately are getting rolled before this Sunday's autocross. I don't think the 255 Direzzas on the track wheels are going to clear that. If they do it will be a little too close for comfort.
Old 05-12-2009, 12:19 PM
  #8  
Registered
 
alfy28's Avatar
 
Join Date: Apr 2006
Location: Austin, Texas
Posts: 5,027
Likes: 0
Received 0 Likes on 0 Posts
Nice




Attached Thumbnails Stance GR+ install..  (image heavy)-hacksaw.jpg  
Old 05-12-2009, 01:14 PM
  #9  
Bruce Van
 
bruce_van's Avatar
 
Join Date: Jan 2006
Location: the OC
Posts: 874
Likes: 0
Received 0 Likes on 0 Posts
Nice work man. Car looks very aggressive now. Post an evaluation & review of the GR+.

Having the wheels flush would really improve the looks.
Old 05-12-2009, 02:03 PM
  #10  
Grocery Getter
iTrader: (1)
 
RawrX8's Avatar
 
Join Date: Jul 2007
Location: Seattle
Posts: 1,835
Likes: 0
Received 10 Likes on 6 Posts
Those look really clean! Nice drop and clean car. Wider tires on there and your money.
Old 05-12-2009, 02:13 PM
  #11  
Registered Toker
iTrader: (2)
 
Ross_Dawg's Avatar
 
Join Date: Dec 2007
Location: Bend, OR
Posts: 5,545
Likes: 0
Received 1 Like on 1 Post
Alfy...

Nice lookin stance the c'overs gave you. Anxious to hear how you like them at the Auto-x.
Old 05-12-2009, 02:16 PM
  #12  
Registered
 
alfy28's Avatar
 
Join Date: Apr 2006
Location: Austin, Texas
Posts: 5,027
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Ross_Dawg
Alfy...

Nice lookin stance the c'overs gave you. Anxious to hear how you like them at the Auto-x.
lol glad someone noticed it. lol first thing that came to my head was hackshaw jiiiimmm dugan lol.
Old 05-12-2009, 02:17 PM
  #13  
Trust me, you're wrong
Thread Starter
iTrader: (1)
 
tiresmoker's Avatar
 
Join Date: Feb 2008
Location: Youngstown, Oh
Posts: 779
Likes: 0
Received 0 Likes on 0 Posts
Ok, my life is complete. I have been paint-chopped by Alfy Nice one




As for the wider wheels/fatter rubber, the track wheels fill out the fenders rather nicely.

17x8 Motegi Traklites with Direzza Z1 Star Spec 255 40's.

I think I'm definately gonna have to roll the fenders to clear these.




Old 05-12-2009, 02:35 PM
  #14  
Registered
 
Mr. Pockets's Avatar
 
Join Date: Mar 2008
Location: Champaign, IL
Posts: 491
Received 10 Likes on 8 Posts
It looks like you used the original bolts on the top rear mount. Is that bracket threaded now? I got a set from the first production run and the bracket was not threaded, so I had to get different bolts and nuts to fit. Getting a wrench back there on the nuts is a pain.

What springs did you get for the rear?

I had to roll my rear arches when I had 275s on the car. I have 255/40-17 Bridgestones on the car now, and the roll let me drop the rear a little more than last year.

After your first event, if you want help making changes to the car, PM me and I can help you out. I had to go through it last year. Alternately, Stance supports their customers extremely well. You can go straight to the source!

Best of luck,
Nick
Old 05-12-2009, 03:10 PM
  #15  
Trust me, you're wrong
Thread Starter
iTrader: (1)
 
tiresmoker's Avatar
 
Join Date: Feb 2008
Location: Youngstown, Oh
Posts: 779
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Mr. Pockets
It looks like you used the original bolts on the top rear mount. Is that bracket threaded now? I got a set from the first production run and the bracket was not threaded, so I had to get different bolts and nuts to fit. Getting a wrench back there on the nuts is a pain.

I can imagine that bracket would be a pain to work around. The bracket is threaded now, and that was the only issue I had with the kit though as they had them rotated 180 degrees from where they should have been so I had to loosen the (4) bolts that hold that bracket on the top of the coilover and spin it around. It was a quick fix.


Originally Posted by Mr. Pockets
What springs did you get for the rear?
7k for the rears. She seems to handle pretty well too. I remember reading your posts about you going with the 6k in the rear.

Originally Posted by Mr. Pockets
After your first event, if you want help making changes to the car, PM me and I can help you out. I had to go through it last year. Alternately, Stance supports their customers extremely well. You can go straight to the source!

Best of luck,
Nick
Sounds good. First event is this weekend. (3rd event of the year) Luckily the club I run with is trying to setup a "standard" course that they will be running once at the beginning of the year and once at the end of the year to check for improvements. Two weeks ago we ran at the lot, but it was still too dirty, so now that the street sweepers came and cleaned all the gravel and dust off we're gonna run the same course again this Sunday. It'll be nice to see improvements over from last week.

Thanks for the offer to help set up the car, I appreciate it. If I need anything I'll defiantely shoot you a pm.
Old 05-12-2009, 03:50 PM
  #16  
Irollerblade.
iTrader: (2)
 
Fortunate Few's Avatar
 
Join Date: Apr 2007
Location: Valencia, So-Cal
Posts: 1,657
Likes: 0
Received 1 Like on 1 Post
sweet, i need a drop
Old 05-12-2009, 04:54 PM
  #17  
Registered
 
Mr. Pockets's Avatar
 
Join Date: Mar 2008
Location: Champaign, IL
Posts: 491
Received 10 Likes on 8 Posts
Originally Posted by tiresmoker
7k for the rears. She seems to handle pretty well too. I remember reading your posts about you going with the 6k in the rear.
Yes, 7k springs were way too much for the car last year. I'm on very different tires this season, though, and all that I did to soften the car last year may be too much now. We'll see.

I would caution you against making too much of an assumption about how the car 'handles' before you put it through the rigors of competition. I thought my car felt great until I took it to the first event, where it tried to kill me. :P On the street I rarely, if ever, approach the 'limit' of my tires on purpose. On a course, I'm trying to do so at all times.
Old 05-12-2009, 05:48 PM
  #18  
The devil made me do it
iTrader: (1)
 
DeViLbOi's Avatar
 
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes on 2 Posts
Looks good Brian...too bad Im gonna miss Sunday.
Old 05-12-2009, 11:38 PM
  #19  
I LuV mY Rotary....
iTrader: (10)
 
lepichichi's Avatar
 
Join Date: May 2007
Location: killADelPhia
Posts: 3,408
Likes: 0
Received 0 Likes on 0 Posts
car looks good, but please dont kill the beer
[/QUOTE]
Old 05-12-2009, 11:49 PM
  #20  
The devil made me do it
iTrader: (1)
 
DeViLbOi's Avatar
 
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes on 2 Posts
It's the High Life...and knowing Brian...that Beer was long since dead. :P
Old 05-13-2009, 12:35 AM
  #21  
:D
 
dwdgsi04's Avatar
 
Join Date: Feb 2008
Location: Seoul, South Korea
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts


Is reusing that little gasket a necessity?
Old 05-13-2009, 12:49 AM
  #22  
a.k.a. WhITeRE8
iTrader: (8)
 
SiLVeRE8's Avatar
 
Join Date: Apr 2005
Location: Nor Cal *
Posts: 2,231
Likes: 0
Received 0 Likes on 0 Posts
damn you I need these! nice job!
Old 05-13-2009, 02:17 AM
  #23  
Registered
iTrader: (3)
 
trustbuddy's Avatar
 
Join Date: Apr 2006
Location: California
Posts: 416
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by dwdgsi04


Is reusing that little gasket a necessity?
I didn't re-use it when i installed mine.
i didn't think it was necessary...
Old 05-13-2009, 06:28 AM
  #24  
Registered User
 
jaudash's Avatar
 
Join Date: Jan 2009
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Awesomes
Old 05-14-2009, 08:45 AM
  #25  
Registered User
 
megz's Avatar
 
Join Date: Jul 2008
Location: Cleveland, OH
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
I'm so glad you didn't post me cleaning your wheels lol. We should have got a picture of me in the trunk with the damper adjustment extensions. The car feels completely different and looks much better now IMO. I'm definitely glad you chose the gr+'s


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Stance GR+ install.. (image heavy)



All times are GMT -5. The time now is 08:29 AM.