Video: Grand-Am Speedsource RX-8 passes Porsche GT3 for first at Homestead
#54
Registered
Join Date: Mar 2003
Location: Santiago, Dominican Republic
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 9krpmrx8
Ah, yes, emissions. I wonder what shops around here could pull of that swap. I heard it's like $11k right?
#55
Londons Yellow Peril
if some1 uses a 3 rotor 20b in a race car, why dont they make a 3 rotor renesis for the race car, as basically the renesis is a more powerful design?
Stupid question maybe as 20b is a ready made motor and a 3 rotor renesis would have to be custom made, but still.......
Stupid question maybe as 20b is a ready made motor and a 3 rotor renesis would have to be custom made, but still.......
#56
Registered User
Thread Starter
Join Date: Oct 2005
Location: Toronto, Canada
Posts: 2,047
Likes: 0
Received 0 Likes
on
0 Posts
the 3-rotor used in the race car has peripheral port intake and exhaust, this configuration allows for the most flow.
________
California Medical Marijuana Dispensary
________
California Medical Marijuana Dispensary
Last edited by Renesis_8; 09-11-2011 at 12:39 PM.
#57
Administrator
Originally Posted by 9krpmrx8
Wow, what are the downsides to the three rotor? I wonder why it was never used in place of the Renesis or the other 13b's. Is it not streetable at that power level?
hence why they were built in the first place.
![](http://cp_www.tripod.com/rotary/images/pg20_01b.jpg)
#58
Registered User
Thread Starter
Join Date: Oct 2005
Location: Toronto, Canada
Posts: 2,047
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, I watched the race again, theres another clip about 3min long on the RX-8 chasing the Porsche from the car cam onboard the RX-8, you can hear the nice scream of the rotary engine, with good comments from the announcers. I'll upload it tonight once I finish some work at hand, if not it'll be up tomorrow for sure.
________
AnalQueen cam
________
AnalQueen cam
Last edited by Renesis_8; 09-11-2011 at 12:42 PM.
#59
SARX Legend
iTrader: (46)
Wow, 7k for the engine, does the rx8 tranny mate up and can it handle the power? Are the changes to the electronics (engine harness) extensive? So the newest 20B is from 1996?
Last edited by 9krpmrx8; 03-28-2007 at 09:58 PM.
#60
Registered
Join Date: Mar 2003
Location: Santiago, Dominican Republic
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
it is not an easy swap, you have to do a custom harness,the trans bolts up but it cant handle the power, it is better to use a 2nd gen turboII trans
7,000 is a lot you can get it cheaper
7,000 is a lot you can get it cheaper
#61
Zoom-Freakin'-Zoom
iTrader: (5)
Originally Posted by 9krpmrx8
Wow, 7k for the engine, does the rx8 tranny mate up and can it handle the power? Are the changes to the electronics (engine harness) extensive? So the newest 20B is from 1996?
you might read through this. most of what you asked or are going to ask is covered.
https://www.rx8club.com/showthread.p...ighlight=rotor
and a couple of cool videos.. i will help with one. 0 to 100mph ~ 8 seconds. on a street with traffic.
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
#63
Registered User
Thread Starter
Join Date: Oct 2005
Location: Toronto, Canada
Posts: 2,047
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by Renesis_8; 09-11-2011 at 12:42 PM.
#66
The forgestar be with you
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
Will do...In fact I talked to the guys while I was there and even asked if they were selling there shirts but I was told no!
Either way it was a blast!
![Crying](https://www.rx8club.com/images/smilies/crying.gif)
![Crying](https://www.rx8club.com/images/smilies/crying.gif)
![Crying](https://www.rx8club.com/images/smilies/crying.gif)
![Crying](https://www.rx8club.com/images/smilies/crying.gif)
![Tear](https://www.rx8club.com/images/smilies/tear.gif)
Either way it was a blast!
![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
#67
Registered User
Thread Starter
Join Date: Oct 2005
Location: Toronto, Canada
Posts: 2,047
Likes: 0
Received 0 Likes
on
0 Posts
hahaa i am very interested at the driver's suit. it'd make great pajamas.. IN THE WINTER! =)
________
Park Royal 2 Condominium Pattaya
________
Park Royal 2 Condominium Pattaya
Last edited by Renesis_8; 09-11-2011 at 12:43 PM.
#68
SARX Legend
iTrader: (46)
Originally Posted by swoope
you might read through this. most of what you asked or are going to ask is covered.
https://www.rx8club.com/showthread.p...ighlight=rotor
and a couple of cool videos.. i will help with one. 0 to 100mph ~ 8 seconds. on a street with traffic.
beers![Beer](https://www.rx8club.com/images/smilies/beer.gif)
https://www.rx8club.com/showthread.p...ighlight=rotor
and a couple of cool videos.. i will help with one. 0 to 100mph ~ 8 seconds. on a street with traffic.
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
#70
The forgestar be with you
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Renesis_8
hahaa i am very interested at the driver's suit. it'd make great pajamas.. IN THE WINTER! =)
![SHOCKED](https://www.rx8club.com/images/smilies/SHOCKED.gif)
![Yelrotflmao Vi](https://www.rx8club.com/images/smilies/yelrotflmao-vi.gif)
![Yelrotflmao Vi](https://www.rx8club.com/images/smilies/yelrotflmao-vi.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Brooklynite
NE For Sale/Wanted
4
11-10-2015 06:42 PM
Touge
Canada Forum
3
09-10-2015 08:07 AM