{ FS } Custom top mount turbo kit
#1
Registered
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: WV
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Custom top mount turbo kit
Category: Engine - Power Adders
Price: $5500
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): WV
Item Condition: Used
More about the setup, Every tube made from 304 stainless steel and took my time with it all making sure it fit right. Almost 3 weeks of night work went into fab on the manifold and downpipe. It uses a t04b garrett built by Bryan at BNR supercars. 60mm wheel, .70A/R compressor housing, .68 t4 hot side with 3'' v-band. Ball bearing and water cooled center section. The wastegate is a v44 tial, on a tru boost AEM controller with 5psi spring. low boost is 10psi, high is around 15psi (never took it that high). VS racing intercooler fit perfectly in the front bumper due to the modified bumper support. With the purchase ill need your old cross brace and you can have the special one for the IC. All 2.5 aluminum charge pipe with a custom CNC made by my dads work, not sure if i want to part with that but if so ill put another in its place. I use a k&n MAF tube to keep stock diameter so that you can tune with the cobb. Which was data log tuned by Kane. I could go on for days about this kit but this is for serious inquires only, feel free to PM me your email or phone and I have tons of pictures and more info. This site wouldn't let me post pictures up so I prefer email. This is a ready to go setup. Only thing you would need to buy is your own cobb, oil sandwich plate for feed line, and a battery trunk mount kit if you don't already have one. Like i said there is much much more about this kit so contact me for more info. Thanks
Last edited by renesisnube; 10-05-2012 at 09:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post