{WTB} Front Driver Side Wheel Hub Assembly
#1
Registered User
Thread Starter
![ON](https://www.rx8club.com/images/icons/on.jpg)
Category: Steering & Suspension
Price: $0
Private or Vendor Listing: Private Listing
Location (US State/Canada/Int): Canada
Item Condition: New
#2
Phone Booth'd
iTrader: (4)
Why would you think that your hub is warped. Unless you were in a serious accident or drilled a curb, I doubt that's the case.
What kind of noise is it. Have you checked that your pads aren't down to the warning tabs? Have you turned your rotors. Have you checked that your caliper slides aren't sticking?
Check that first before buying a new hub/knuckle assembly. At the very worst, you have to buy new pads and/or rotors. Most likely you can just have the rotors turned down.
What kind of noise is it. Have you checked that your pads aren't down to the warning tabs? Have you turned your rotors. Have you checked that your caliper slides aren't sticking?
Check that first before buying a new hub/knuckle assembly. At the very worst, you have to buy new pads and/or rotors. Most likely you can just have the rotors turned down.
#3
Registered User
Thread Starter
Rotors and pads were changed recently and yes my brother did his a curb on the front driver side and I know how easy those hubs can be bent. The noise like something being squeezed and again only happens when I apply the brake slightly, as I brake harder it goes away so it must be the wheel hub is warped slightly.
Also recently I had some front driver side wheel problems and I had to use a slide hammer to remove the press fitted hub from the assembly so im sure there was some damage done there.
Also recently I had some front driver side wheel problems and I had to use a slide hammer to remove the press fitted hub from the assembly so im sure there was some damage done there.
#4
Registered User
Join Date: Aug 2006
Location: St Louis MO
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
![MO](https://www.rx8club.com/images/icons/mo.jpg)
I've got one..... I've got a whole car im parting out. Ill sell you the unit as a whole for a measly 100 bux. car has 83,000 on it. Its on jack stands right now.
you would have to be responsible for shipping though. I am PAYPAL verified also!
Let me know if you need anything else.
you would have to be responsible for shipping though. I am PAYPAL verified also!
Let me know if you need anything else.
Thread
Thread Starter
Forum
Replies
Last Post
vapor2
RX-8 Parts For Sale/Wanted
3
10-08-2015 02:08 PM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 07:07 PM
SayDfuse
Series I Exterior Appearance and Body Kits
3
08-03-2015 10:41 PM
reverse01134
RX-8's For Sale/Wanted
0
07-16-2015 10:27 PM