FS: Greddy Turbo Kit, Autopower Roll Cage, More
05-20-2009, 09:21 AM
#1
Registered
Thread Starter
Join Date: May 2005
Location: Houston
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
FS: Greddy Turbo Kit, Autopower Roll Cage, More
Turbo Kit Sold, many parts still available:
Autopower Roll Cage = $475 delivered in Houston, Austin, San Antonio, Dallas. [or meet halfway elsewhere]. I paid $500+ and approx $200 shipping.
Roll Cage Details
I bought this kit from VividRacing in February of 2008. It is the Street Sport with bolt-in harness bar.
I wrapped it upon arrival, and the black paint on the roll bar is still immaculate.
This fits better in a non-sunroof 8, but fit in my sunroofed 8, minus the dome light and with a crimped head liner.
Magnecor Spark Plug Wires: $80 Shipped
Less than 1000 miles on them.
Coil packs with <1000 miles on them. $80 Shipped
E-Manage Ultimate [no harness, just the USB output cable] $300 Shipped
Oil Catch Can: $40 Shipped
Sparco Seat Brackets [NEW IN WRAPPING] [2] These Retail for $99. I will throw in the hardware for free, $180 shipped for Driver + Passenger.
Hardware for Brackets
G-Force Harnesses [NIB] [2] and Accessories
These retail for $195 per set. I will sell them together for $350.
Camlock. Black.
I am currently done with the RX-8, and have parts lying everywhere. I will update this thread with more parts when I get the opportunity.
Interested Parties, please post questions in this thread, as many of you will have the same questions. Paypal verified only for payment, unless you are paying via bank check in person.
Thanks!
Michael
Autopower Roll Cage = $475 delivered in Houston, Austin, San Antonio, Dallas. [or meet halfway elsewhere]. I paid $500+ and approx $200 shipping.
Roll Cage Details
I bought this kit from VividRacing in February of 2008. It is the Street Sport with bolt-in harness bar.
I wrapped it upon arrival, and the black paint on the roll bar is still immaculate.
This fits better in a non-sunroof 8, but fit in my sunroofed 8, minus the dome light and with a crimped head liner.
Magnecor Spark Plug Wires: $80 Shipped
Less than 1000 miles on them.
Coil packs with <1000 miles on them. $80 Shipped
E-Manage Ultimate [no harness, just the USB output cable] $300 Shipped
Oil Catch Can: $40 Shipped
Sparco Seat Brackets [NEW IN WRAPPING] [2] These Retail for $99. I will throw in the hardware for free, $180 shipped for Driver + Passenger.
Hardware for Brackets
G-Force Harnesses [NIB] [2] and Accessories
These retail for $195 per set. I will sell them together for $350.
Camlock. Black.
I am currently done with the RX-8, and have parts lying everywhere. I will update this thread with more parts when I get the opportunity.
Interested Parties, please post questions in this thread, as many of you will have the same questions. Paypal verified only for payment, unless you are paying via bank check in person.
Thanks!
Michael
Last edited by Michael; 06-07-2009 at 04:02 PM.
05-20-2009, 09:28 AM
#2
Registered
Thread Starter
Join Date: May 2005
Location: Houston
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Video of the kit installed on my car. Camera car is a 349awhp Evo VIII.
http://www.youtube.com/watch?v=iZNyePMGhoo
http://www.youtube.com/watch?v=iZNyePMGhoo
05-21-2009, 10:29 AM
#8
Registered
Thread Starter
Join Date: May 2005
Location: Houston
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
On the non-upgraded turbo, the car made ~240 but boost dropped off around 7k rpm.
Naturally I wasn't happy with the tune, so I had it re-tuned in Dallas at Rotary Performance after upgrading the turbo. Rotary Performance did not provide me with a dyno. They tuned with my intent to track the car in mind, with stock boost settings, conservatively.
The car was caged with no rear seats/interior at that time, and weighed less than our Boxster S track car [when the rear rotor lost compression and I didn't want to risk driving the car, we used our car trailer to trailer it back to Houston, and the trailer sat higher (less weight) than the Porsche]
I can get a mod list and pictures of Evo if need be [best friend's car]. Basics would be Evo 8 with cam gears, new manifold, Evo 9 turbo, full 4" and catless, 265's all the way around.
Dibs have been called on strakes pending payment, with one person waiting in line.
Offer has been made on Turbo kit + oilpan, minus some of the upgrades. I will provide details on what is left if money changes hands.
Thanks!
Michael
Naturally I wasn't happy with the tune, so I had it re-tuned in Dallas at Rotary Performance after upgrading the turbo. Rotary Performance did not provide me with a dyno. They tuned with my intent to track the car in mind, with stock boost settings, conservatively.
The car was caged with no rear seats/interior at that time, and weighed less than our Boxster S track car [when the rear rotor lost compression and I didn't want to risk driving the car, we used our car trailer to trailer it back to Houston, and the trailer sat higher (less weight) than the Porsche]
I can get a mod list and pictures of Evo if need be [best friend's car]. Basics would be Evo 8 with cam gears, new manifold, Evo 9 turbo, full 4" and catless, 265's all the way around.
Dibs have been called on strakes pending payment, with one person waiting in line.
Offer has been made on Turbo kit + oilpan, minus some of the upgrades. I will provide details on what is left if money changes hands.
Thanks!
Michael
05-21-2009, 03:56 PM
#12
Registered
Thread Starter
Join Date: May 2005
Location: Houston
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Street Sport. It has the removable harness bar [the "street" does not] but does NOT have the cross bar like the "race."
You can see the legs and harness bar in the floor in the picture, along with the main loop.
I can deliver to San Antonio this week if need be...have a suburban, and can guarantee that gas will be cheaper than shipping.
You can see the legs and harness bar in the floor in the picture, along with the main loop.
I can deliver to San Antonio this week if need be...have a suburban, and can guarantee that gas will be cheaper than shipping.
05-21-2009, 05:28 PM
#14
4 Cylinder Rotary
iTrader: (4)
Join Date: May 2007
Location: San Antonio, TX
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
i would want but...u can get from here for 485+shipping
http://www.good-win-racing.com/Mazda...61-0178SS.html
was yours made for a sunroof
http://www.good-win-racing.com/Mazda...61-0178SS.html
was yours made for a sunroof
05-22-2009, 02:29 AM
#15
Registered
Thread Starter
Join Date: May 2005
Location: Houston
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
i would want but...u can get from here for 485+shipping
http://www.good-win-racing.com/Mazda...61-0178SS.html
was yours made for a sunroof
http://www.good-win-racing.com/Mazda...61-0178SS.html
was yours made for a sunroof
However, it fit in my sunroofed 8 with the dome light removed.
Shipping was $200-220, and I'm offering to deliver. Keep that in mind.
05-28-2009, 05:46 PM
#19
Registered
Thread Starter
Join Date: May 2005
Location: Houston
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
First post updated. Still have Corbeau 3 point harnesses and a midpipe I have yet to have a chance to photograph that will be posted this week.
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 09:00 AM
yurcivicsux
Series I Major Horsepower Upgrades
192
09-12-2017 10:54 PM
