FS: Mazdatrix Lightweight Aluminum Flywheel
#1
FD owner
Thread Starter
Join Date: Aug 2007
Location: Bay Area CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
![CA](https://www.rx8club.com/images/icons/ca.jpg)
Hi. Selling a slightly used Mazdatrix Lightweight Aluminum Flywheel. The RX8 uses the same flywheel as the 93-95 RX7 Twin Turbo (FD) and the 88-91 RX7 Turbo II (FC). Link to Mazdatrix flywheel info:
http://mazdatrix.com/8flywheel.htm
http://mazdatrix.com/flywheel.htm
The flywheel has less than 4,000 miles on it on an FD that was basically stock. It is in excellent condition.
This flywheel has a replaceable friction disc. It is very similar to the Racing Beat flywheel in design.
The price for this new is $415. My price = $210 shipped in the lower 48 US states.
PM if interested. Pics will be up soon. FYI - I have excellent references on rx7club. My user name there is gracer7-rx7.
Thanks.
http://mazdatrix.com/8flywheel.htm
http://mazdatrix.com/flywheel.htm
The flywheel has less than 4,000 miles on it on an FD that was basically stock. It is in excellent condition.
This flywheel has a replaceable friction disc. It is very similar to the Racing Beat flywheel in design.
The price for this new is $415. My price = $210 shipped in the lower 48 US states.
PM if interested. Pics will be up soon. FYI - I have excellent references on rx7club. My user name there is gracer7-rx7.
Thanks.
#7
Hi. Selling a slightly used Mazdatrix Lightweight Aluminum Flywheel. The RX8 uses the same flywheel as the 93-95 RX7 Twin Turbo (FD) and the 88-91 RX7 Turbo II (FC). Link to Mazdatrix flywheel info:
http://mazdatrix.com/8flywheel.htm
http://mazdatrix.com/flywheel.htm
The flywheel has less than 4,000 miles on it on an FD that was basically stock. It is in excellent condition.
This flywheel has a replaceable friction disc. It is very similar to the Racing Beat flywheel in design.
The price for this new is $415. My price = $210 shipped in the lower 48 US states.
PM if interested. Pics will be up soon. FYI - I have excellent references on rx7club. My user name there is gracer7-rx7.
Thanks.
http://mazdatrix.com/8flywheel.htm
http://mazdatrix.com/flywheel.htm
The flywheel has less than 4,000 miles on it on an FD that was basically stock. It is in excellent condition.
This flywheel has a replaceable friction disc. It is very similar to the Racing Beat flywheel in design.
The price for this new is $415. My price = $210 shipped in the lower 48 US states.
PM if interested. Pics will be up soon. FYI - I have excellent references on rx7club. My user name there is gracer7-rx7.
Thanks.
Hey! I will buy it. PM me!
#8
FD owner
Thread Starter
Join Date: Aug 2007
Location: Bay Area CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Counterweight new from Mazdatrix: http://mazdatrix.com/getprice.asp?partnum=11-52X0-N3Z2
You may also want to try Ray Crowe from Malloy Mazda for it. His phone is 888-533-3400
I'm sure its cheaper to buy it used or check on ebay for one.
Specs on the flywheel copied and pasted from Mazdatrix's website for those that asked:
"These have a bolted on, tuftrided steel friction surface for long life (also replaceable), steel ring gear is heat shrunk and bolted in place, bolts included to attach flywheel to rear counterweight, needed hardware for clutch mounting supplied, price includes rear counterweight. Weight, including rear counterweight, is approximately 12 pounds. This is a significant savings of weight over the stock flywheel, and the weight is concentrated more towards the center. This will significantly decrease inertia, resulting in improved acceleration through the gears."
W/o the counterweight, its 9.5lbs
You may also want to try Ray Crowe from Malloy Mazda for it. His phone is 888-533-3400
I'm sure its cheaper to buy it used or check on ebay for one.
Specs on the flywheel copied and pasted from Mazdatrix's website for those that asked:
"These have a bolted on, tuftrided steel friction surface for long life (also replaceable), steel ring gear is heat shrunk and bolted in place, bolts included to attach flywheel to rear counterweight, needed hardware for clutch mounting supplied, price includes rear counterweight. Weight, including rear counterweight, is approximately 12 pounds. This is a significant savings of weight over the stock flywheel, and the weight is concentrated more towards the center. This will significantly decrease inertia, resulting in improved acceleration through the gears."
W/o the counterweight, its 9.5lbs
Thread
Thread Starter
Forum
Replies
Last Post
{WTB/WTT} WTB Right Undertray Riser and Guard
archon
RX-8 Parts For Sale/Wanted
3
10-01-2015 06:08 AM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM