FS: Titanium Gray aero flares
#1
FS: Titanium Gray aero flares
I tried selling these a while back, no one was that interested, so they are up for sale again (just taking up room in the garage) at a lower price.
For Sale: One set (right and left) Appearance Package Titanium Gray Metallic Clearcoat (29Y) side aero flares for RX-8. These came off my 8 with around 48,000 miles of use. They are in excellent condition for the mileage.
However, these are used, so they aren't perfect. The passenger side flare is in good shape, with some minor chips on the front edge of the flare.
The drivers side flare has some curbing along the bottom edge running roughly half the length of the flare. The curbing is on the bottom side so you can't see the curbing at all once the flare is installed on the vehicle.
The flares were dealership installed so I don't have any instructions for them, unfortunately. You will need to drill four (4) holes in the side of the car for install, the bottom hooks into your factory rock guard.
I am missing three (3) of the white plastic clips on the side, as well as one (1) of the screw and nut assemblies that attaches at the back. You will also need some sort of of adhesive to install them to the body I would recommend 3M DuraMix 40/40)
Pictures:
Drives side flare damage:
Passenger side flare:
Chips in the passenger side front:
The paint is in excellent condition on both flares. The curbing on the drivers side flare is hardly visible when install, since it is on the bottom edge.
Asking 125 OBO SHIPPED
Make an offer!
For Sale: One set (right and left) Appearance Package Titanium Gray Metallic Clearcoat (29Y) side aero flares for RX-8. These came off my 8 with around 48,000 miles of use. They are in excellent condition for the mileage.
However, these are used, so they aren't perfect. The passenger side flare is in good shape, with some minor chips on the front edge of the flare.
The drivers side flare has some curbing along the bottom edge running roughly half the length of the flare. The curbing is on the bottom side so you can't see the curbing at all once the flare is installed on the vehicle.
The flares were dealership installed so I don't have any instructions for them, unfortunately. You will need to drill four (4) holes in the side of the car for install, the bottom hooks into your factory rock guard.
I am missing three (3) of the white plastic clips on the side, as well as one (1) of the screw and nut assemblies that attaches at the back. You will also need some sort of of adhesive to install them to the body I would recommend 3M DuraMix 40/40)
Pictures:
Drives side flare damage:
Passenger side flare:
Chips in the passenger side front:
The paint is in excellent condition on both flares. The curbing on the drivers side flare is hardly visible when install, since it is on the bottom edge.
Asking 125 OBO SHIPPED
Make an offer!
Thread
Thread Starter
Forum
Replies
Last Post