{ FS } Greddy Turbo Kit w/ Cobb ACP, AEM, HKS BOV, and more...everything you need!
04-18-2012, 01:05 AM
#1
Greddy Turbo Kit w/ Cobb ACP, AEM, HKS BOV, and more...everything you need!
Category: Engine - Power Adders
Price: $2600
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): CA
Item Condition: Used
I've decided to revert my RX-8 back to stock, and as such, I am parting out my entire Greddy turbo kit and accessories to help recoup some money.
My car is currently at Mazdatrix's shop in Long Beach, so I don't have the ability to post any current pictures...
Here's a few random past pictures, though...
Basically, it's a used Greddy turbo kit. I apologize, I don't know the exact mileage on the kit. The kit has no known "mods" or "upgrades" that I am aware of...but basically here's what you're getting:
1.) Used Greddy Turbo Kit w/ all parts, pipings, couplers, and necessary install hardware.
2.) HKS Blow-Off Valve
3.) Cobb Accessport (currently has some MazdaManiac turbo tunes on it)
4.) AEM UEGO wide-band sensor gauge/kit
5.) AEM TruBoost electronic boost controller.
6.) Dual A-Pillar Pod Gauge w/ pre-drilled A-Pillar (so you can save yours!)
Basically, if you buy this all from me, you're getting 100% everything you need to bolt up, wire up, plug up, and go!
Definitely looking to sell everything ASAP, so please don't hesitate to ask any questions!
PRICE: $2,600
LOCATION: San Diego, CA 92108 - Mission Valley
Text'ing me is the fastest way to reach me! PM's are fine too, though!
Thanks for your time, everyone!
- Mike
678-464-4317
Last edited by YoshiFD3S; 04-18-2012 at 01:18 AM.
04-18-2012, 03:32 AM
#3
Registered
iTrader: (2)
Join Date: May 2010
Location: Barksdale AFB, LA
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Wow, pretty good deal man especially with those gauges tossed in.
I don't think the MM AP tunes will work with another ECU though. If I'm not mistaken you will probably have to unmarry it from yours.
GLWS
I don't think the MM AP tunes will work with another ECU though. If I'm not mistaken you will probably have to unmarry it from yours.
GLWS
04-18-2012, 09:12 AM
#5
Yes, I'm basically putting the car back to a stock condition.
My motor is currently blown, so I was going to have Mazdatrix do a $8,000-$10,000 full build up w/ supporting mods to keep the turbo setup, but money has dried up, so plans have changed.
I bought the car for my wife, and I finally came to the realization that although I would love for the car to be a 300+hp turbo rotary....it's really not necessary for my wife.....
That, and I still have my other 2 money pit cars to worry about. lol
My wife loves the car too much for me to just up and sell it, though...so this seemed like the next month logical choice.
For Dolpho69 and others...to my knowledge, none of the "MM fixes" have been done to this turbo kit, as far as I know.
:]
My motor is currently blown, so I was going to have Mazdatrix do a $8,000-$10,000 full build up w/ supporting mods to keep the turbo setup, but money has dried up, so plans have changed.
I bought the car for my wife, and I finally came to the realization that although I would love for the car to be a 300+hp turbo rotary....it's really not necessary for my wife.....
That, and I still have my other 2 money pit cars to worry about. lol
My wife loves the car too much for me to just up and sell it, though...so this seemed like the next month logical choice.
For Dolpho69 and others...to my knowledge, none of the "MM fixes" have been done to this turbo kit, as far as I know.
:]
04-18-2012, 08:45 PM
#9
Thanks for the free bump.
:]
I'll part them out only if the buyer of the turbo kit itself chooses that they don't want those particular items, sure...otherwise, no, I won't part them out before selling the Greddy kit itself.
Just easier to sell everything together, you know?
:]
Just easier to sell everything together, you know?
Last edited by YoshiFD3S; 04-18-2012 at 09:00 PM.
04-19-2012, 09:28 AM
#11
I talked to John @ Mazdatrix yesterday and asked them to start tearing everything off the car.
He said he would talk to Kyle about trying to take some pictures of the parts for you guys.
I'll call them back today or tomorrow and ask if they've started taking everything off yet.
He said he would talk to Kyle about trying to take some pictures of the parts for you guys.
I'll call them back today or tomorrow and ask if they've started taking everything off yet.
04-20-2012, 01:12 PM
#15
Just got off the phone with John @ Mazdatrix.
All the turbo stuff except the intercooler have been removed from the car and are sitting off to the side.
He said he would try and have Kyle e-mail me some pictures ASAP.
lol man, I'm all excited. I wanna get the stuff sold ASAP so I can pay them to put the car back to stock and get it running again!
:D
All the turbo stuff except the intercooler have been removed from the car and are sitting off to the side.
He said he would try and have Kyle e-mail me some pictures ASAP.
lol man, I'm all excited. I wanna get the stuff sold ASAP so I can pay them to put the car back to stock and get it running again!
:D
04-23-2012, 05:54 PM
#18
Haltech > Cobb > Greddy E-Manage
And you are correct, yes, the buyer needs to coordinate installation and tuning o on their own, to prevent driving around on an un-tuned turbo setup.
05-01-2012, 12:57 PM
#24
Turbo kit and Cobb Accessport are SOLD SOLD SOLD!!
I still have the AEM TruBoost Electronic Boost Controller, AEM UEGO Wideband AFR Gauge, and the dual pod-gauge available though, if anyone wants/needs em'.
Post/PM me some offers.
I still have the AEM TruBoost Electronic Boost Controller, AEM UEGO Wideband AFR Gauge, and the dual pod-gauge available though, if anyone wants/needs em'.
Post/PM me some offers.
