{ FS } RX-8 part out
02-07-2015 | 06:27 AM
#1
RX-8 part out
Category: Engine - Complete Motors
Price: $1
Private or Vendor Listing: Private Listing
Location (US State/Canada/Int): AL
Item Condition: Used
- Shine auto front lip FRP BNIB: $200.00 O.B.O.
- Garage-line header: $180.00 O.B.O.
- Agency power under drive pulley: $120.00 O.B.O.
- Seibon CF hood ts2-style: $700.00 O.B.O.
- Shine auto kit all carbon fiber feed sides and mud guards (used 5/10): $200
- OEM front seats withe airbags electric driver side make offer
- MSP engine blown make offer
Last edited by comebackqid; 02-03-2016 at 05:32 PM.
02-09-2015 | 02:59 AM
#7
PM's replied. I'm thinking of selling everything for 17,000 O.B.O. wanting to start from scratch.
I'm selling my 2005 Mazda RX-8 GT
I have the price set at $17,000 do to existing modifications, as well as tons of extras 3 sets of wheels body kit and many other parts.
- Has 117,000 miles original engine (still runs but low compression.)
Engine mods: AEM polished CAI, BHR ignition coils and wires, SOHN adapter, Agency power under drive pulley, garage-line header, racing beat dual resonated mid-pipe, greddy SP2 exhaust, polyurethane engine mounts.(rx8performance.com), Koyo radiator.
Suspension: Stance GR coilovers w/swift springs 11k front 9k rear, mazdaspeed carbon fiber front strut bar, beat rush rear strut bar, megan racing rear camber arms, super now tie rods and rod ends, super now rear subframe collars/spacers, (rx8performance.com) polyurethane rear differential bushings, agency power front and rear adjustable sway bars w/end links, Energy suspension polyurethane bushings in all suspension components.
Brakes: Brembo BBK front drilled rotors stainless steel lines, drilled and slotted rear rotors (R1concepts) stainless steel lines.
Exterior: Shine auto lip kit = carbon fiber front lip, side skirts, and mud guards, Carbon fiber type 2 Seibon vented hood, APR GT-200 wing with 2.5in. risers, Carbon fiber b pillars, L.E.D. lights all around. Paint is 6/10 could use a buff/polish.
Interior: Custom suede steering wheel, pioneer touch screen, infinity speakers all around, 12 in. JL subwoofer w/250w amp, Prosport halo gauges, carbon fiber interior trim, L.E.D. lights, powered by max shifter, synchro saver. Interior condition 7/10 one small dash crack and driver seat has common wear.
The car will come with the extras mentioned if the price is right.
Extras: OEM hood, OEM wing, OEM appearance package, carbon in motion RE amemiya body kit. OEM brakes drilled and slotted rotors stainless steel lines, REmedy water pump and thermostat, Nardi 330 deep corn rally wheel suede, NRG short quick release silver, Enkei RPF01 wheels 18x10 +38 offset F+R hankook RS-3 265/35/18 (perfect track setup), Avant Garde wheels lucido white 3pc. 18x11 +22 offset F+R federal 595ss 255/35/18, volk racing lug nuts, Adaptronic ECU for series 1 RX8, Autopower racing roll cage w/harness bar, custom rear diffuser, Mazdatrix motor mounts for RX8 for 13B-REW swap, Mb battle wheels matte white 18x9.5 +15 F+R with tires 225/40/18. all tires have 90% tread left on them.
Title is in hand and ready to go! Price and parts are negotiable, but don't be ridiculous.
I'm selling my 2005 Mazda RX-8 GT
I have the price set at $17,000 do to existing modifications, as well as tons of extras 3 sets of wheels body kit and many other parts.
- Has 117,000 miles original engine (still runs but low compression.)
Engine mods: AEM polished CAI, BHR ignition coils and wires, SOHN adapter, Agency power under drive pulley, garage-line header, racing beat dual resonated mid-pipe, greddy SP2 exhaust, polyurethane engine mounts.(rx8performance.com), Koyo radiator.
Suspension: Stance GR coilovers w/swift springs 11k front 9k rear, mazdaspeed carbon fiber front strut bar, beat rush rear strut bar, megan racing rear camber arms, super now tie rods and rod ends, super now rear subframe collars/spacers, (rx8performance.com) polyurethane rear differential bushings, agency power front and rear adjustable sway bars w/end links, Energy suspension polyurethane bushings in all suspension components.
Brakes: Brembo BBK front drilled rotors stainless steel lines, drilled and slotted rear rotors (R1concepts) stainless steel lines.
Exterior: Shine auto lip kit = carbon fiber front lip, side skirts, and mud guards, Carbon fiber type 2 Seibon vented hood, APR GT-200 wing with 2.5in. risers, Carbon fiber b pillars, L.E.D. lights all around. Paint is 6/10 could use a buff/polish.
Interior: Custom suede steering wheel, pioneer touch screen, infinity speakers all around, 12 in. JL subwoofer w/250w amp, Prosport halo gauges, carbon fiber interior trim, L.E.D. lights, powered by max shifter, synchro saver. Interior condition 7/10 one small dash crack and driver seat has common wear.
The car will come with the extras mentioned if the price is right.
Extras: OEM hood, OEM wing, OEM appearance package, carbon in motion RE amemiya body kit. OEM brakes drilled and slotted rotors stainless steel lines, REmedy water pump and thermostat, Nardi 330 deep corn rally wheel suede, NRG short quick release silver, Enkei RPF01 wheels 18x10 +38 offset F+R hankook RS-3 265/35/18 (perfect track setup), Avant Garde wheels lucido white 3pc. 18x11 +22 offset F+R federal 595ss 255/35/18, volk racing lug nuts, Adaptronic ECU for series 1 RX8, Autopower racing roll cage w/harness bar, custom rear diffuser, Mazdatrix motor mounts for RX8 for 13B-REW swap, Mb battle wheels matte white 18x9.5 +15 F+R with tires 225/40/18. all tires have 90% tread left on them.
Title is in hand and ready to go! Price and parts are negotiable, but don't be ridiculous.
08-04-2015 | 10:02 PM
#21
bump car is being torn down!!!
Free for all first come first serve except for the OMP that going to GK1707 if he still wants it.
All parts will be available this weekend.
Free for all first come first serve except for the OMP that going to GK1707 if he still wants it.
All parts will be available this weekend.
Last edited by comebackqid; 08-04-2015 at 10:08 PM.
08-05-2015 | 09:11 PM
#24