Notices
RX-8 Racing Want to discuss autocrossing, road-racing and drag racing the RX-8? Bring it here. This is NOT a kills/street racing forum.

My 1/4 mile adventure!!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-01-2005 | 02:25 AM
  #1  
RX8INCH's Avatar
Thread Starter
RX8INCH
 
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
Question My 1/4 mile adventure!!

OK so I went to the track tonight (LACR) www.lacr.net ...and I was unhappy with my results!


I had 5 runs. these were my best 2.

Rear tires were @ 20 psi

ACTUAL ADJUSTED (sea level)

15.568 @ 88.840mph 15.101 @ 91.505mph
15.581 @ 89.805mph 15.114 @ 92.499mph

I’m running a canzoomer and a midpipe...I really don’t think I was launching well at all..besides reaction time.. I was told that it didn’t matter if you got a .133 or a .599 when you start moving is what counts right?? Or does my reaction time cut into my ET so I should be .5sec quicker??? This was my first time ever running at a track and it kinda sucked.. The track felt allot more slick then the road!!! Big time!! And I think I was spinning my wheels too much.. I was launching between 5-7K and dumping the clutch.. Anyways on my way home there was a Z350 he pulled up next to me and got even with me and rolled down his window.. So I rolled my down too.. Then he leaped forward so I got on the gas.. he pulled away pretty good.. then my street was coming up and I got in the right lane(from the middle) and what do ya know... the light turned red... I HAD TO.. so I got back in the middle lane.. I asked him if he was stock? he said yea.. He either had rims or powder coated his stockers black.. I told him I had chip and midpipe.. Then after a few seconds the light turned red.. I launched about 5K. got a little sideways and I was off. He got a good launch too and jumped ahead. My nose was just behind his front wheel. then he shifted and I jumped ahead. he was about @ my front wheels and I was pulling ever so slightly.. :D I was in 3rd for a few seconds then I let off because I didn’t want to go any faster.. .. LOL so I don’t under stand why I’m running 15's @ the track but I can beat a Z350... (barely) any ways I turned around and came home..

So I don’t understand why im running so slow? a Z runns in the low 14's

2004 Nissan 350Z 5.3 13.77 (M.T. Mar '04)
2005 Nissan 350Z 35th Anniversary Edition 6 Speed 5.8 14.3 (C&D Apr '05)

I had a good time anyways!
Attached Thumbnails My 1/4 mile adventure!!-dsc01259.jpg   My 1/4 mile adventure!!-dsc01254.jpg   My 1/4 mile adventure!!-dsc01256.jpg  
Old 10-01-2005 | 02:38 AM
  #2  
Rotary Rasp's Avatar
503wtq Boosted Bimmer
iTrader: (2)
 
Joined: Oct 2004
Posts: 3,038
Likes: 0
From: Los Angeles, California
Are you running stock tires?
Old 10-01-2005 | 02:49 AM
  #3  
XDEEDUBBX's Avatar
RX8 HA HA
 
Joined: Aug 2003
Posts: 11,772
Likes: 5
From: Gardena Cali 310
you might want to delete that part about street racing or this thread will be closed...
Old 10-01-2005 | 03:03 AM
  #4  
Rotary Rasp's Avatar
503wtq Boosted Bimmer
iTrader: (2)
 
Joined: Oct 2004
Posts: 3,038
Likes: 0
From: Los Angeles, California
Give him a break... the topic of this thread is not about street racing.
Old 10-01-2005 | 03:45 AM
  #5  
kw1k's Avatar
Banned
 
Joined: Jun 2005
Posts: 660
Likes: 0
From: cali baby
WTF! 15.5? thats terrible!
Old 10-01-2005 | 09:46 AM
  #6  
RotaryManiac's Avatar
1st time rotorhead
 
Joined: May 2005
Posts: 449
Likes: 0
From: Closter, NJ
yea thats sad.
Old 10-01-2005 | 10:47 AM
  #7  
Nemesis8's Avatar
Bigus Rotus
iTrader: (3)
 
Joined: Jun 2004
Posts: 8,573
Likes: 1
From: Missouri
The car is built for a road course not a drag strip
Old 10-01-2005 | 11:13 AM
  #8  
Rotary Rasp's Avatar
503wtq Boosted Bimmer
iTrader: (2)
 
Joined: Oct 2004
Posts: 3,038
Likes: 0
From: Los Angeles, California
I don't get it, I'd love to drive/ride his car and see if it is any slower than mine because I swear I'm running mid 14's.
Old 10-01-2005 | 12:25 PM
  #9  
RX8INCH's Avatar
Thread Starter
RX8INCH
 
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
come to the track with me and run my car.. I dont have a problem with that.. Yea Im not posting a kill or anything.. i just dident get why i beat a z350 but im running 15's.. I know i need to work on my launch.. i am spinning too much... It was my first time @ a track tho.

And yes Im running stock tires Dunlop Sp8080 i think they are
Old 10-02-2005 | 01:06 AM
  #10  
XDEEDUBBX's Avatar
RX8 HA HA
 
Joined: Aug 2003
Posts: 11,772
Likes: 5
From: Gardena Cali 310
Originally Posted by Rotary Rasp
Give him a break... the topic of this thread is not about street racing.
just letting him know whats up...i've been warned numerous times and have had a few threads deleted cause of it...
Old 10-02-2005 | 02:10 AM
  #11  
RX8INCH's Avatar
Thread Starter
RX8INCH
 
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
OK well thanks for the heads up!
Old 10-02-2005 | 10:24 AM
  #12  
dmp's Avatar
dmp
RX8 and a Truk....
 
Joined: Nov 2004
Posts: 4,658
Likes: 7
From: OKC
again 92mph trap speeds are NOT what a 238 hp, 3000lbs car should hit. :-/

How many miles are on your car?
Old 10-02-2005 | 10:26 AM
  #13  
dmp's Avatar
dmp
RX8 and a Truk....
 
Joined: Nov 2004
Posts: 4,658
Likes: 7
From: OKC
Originally Posted by RX8INCH
2004 Nissan 350Z 5.3 13.77 (M.T. Mar '04)
2005 Nissan 350Z 35th Anniversary Edition 6 Speed 5.8 14.3 (C&D Apr '05)
Car and Driver when 14.5 in their long-term test RX8 - nearly .5 faster at 40K miles than they went when the car was new.
Old 10-02-2005 | 03:13 PM
  #14  
RX8INCH's Avatar
Thread Starter
RX8INCH
 
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
I have about 3K on the odo.
Old 10-02-2005 | 05:11 PM
  #15  
IZoomZoomI's Avatar
Boost needed
 
Joined: Dec 2003
Posts: 2,557
Likes: 0
From: San Jose, CA
350z misshifted... Or you were racing an automatic.

R/T has nothing to do with e.t
Old 10-02-2005 | 07:40 PM
  #16  
RX8INCH's Avatar
Thread Starter
RX8INCH
 
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
no it was a manual.. thats why I posted manual time for the 1/4 mi on the 350... and he dident miss any gears that i know of my windows were down and i could hear his engine right next to me...
Old 10-02-2005 | 09:10 PM
  #17  
JeRKy 8 Owner's Avatar
Stuck in a love triangle
 
Joined: Aug 2003
Posts: 2,201
Likes: 3
From: Miami, FL
The funny part is, this is the same guy whose GTech told him he was doing 0-60 in 5.5 seconds.

LOL. I hate to be the one to say it, but I told you so. Guess you can GTrash it now. :D
Old 10-03-2005 | 06:39 AM
  #18  
Tigster's Avatar
RX8 ADDICTED!!!
 
Joined: Aug 2003
Posts: 1,108
Likes: 0
I think it sounds like you need to perfect your launch. Your car as stated will get a little faster with some age to it. I personally have never launched my car but if I was going to play at the drag strip I personally would upgrade my clutch before I did a bunch of 5-7K drops. It was your first time at the strip just keep practicing your technique.

As for the z he probally didn't have a very good launch if he launched at all.

Also can I ask when you use your Gtech what weight are you entering for the car? Are you accounting for yourself, gas, etc. Also do you configure it everytime before using it? It is very easy to get incorrect data from a Gtech if you are not accurate with what you enter.
Old 10-03-2005 | 12:02 PM
  #19  
Ike's Avatar
Ike
Blue By You
 
Joined: Jun 2003
Posts: 8,717
Likes: 0
From: Milwaukee
Originally Posted by JeRKy 8 Owner
The funny part is, this is the same guy whose GTech told him he was doing 0-60 in 5.5 seconds.

LOL. I hate to be the one to say it, but I told you so. Guess you can GTrash it now. :D

Haha, I hadn't realized. This is my favorite quote...

"If you knew anything about a Gtech u would know that it very accurate. Like dmp said, a strip cant measure 0-60 times.. but i do plan on taking it to a track... and WATCH OUT.. cuz my times will reflect the same thing."
Old 10-03-2005 | 12:23 PM
  #20  
Ike's Avatar
Ike
Blue By You
 
Joined: Jun 2003
Posts: 8,717
Likes: 0
From: Milwaukee
Also wanted to add, at least RX8INCH had the guts to post his 1/4 mile times after not getting the results he expected. That's more than a can say for a lot of people that say they're going to the strip and will post times but then never do so.
Old 10-03-2005 | 01:16 PM
  #21  
smrx8's Avatar
Registered User
iTrader: (1)
 
Joined: Jan 2004
Posts: 1,752
Likes: 0
From: WHITE HOUSE
You can do alot better then that just because you hit 15's does it mean your car slow its all in the driver and that perfect launch.I hit the same thing with a broken tranny and 19 inch rims.Hopefully before the winter comes i will be heading back to the track and try my luck.I should be able to hit 13 with no problem aaaa big should
Old 10-03-2005 | 09:51 PM
  #22  
JeRKy 8 Owner's Avatar
Stuck in a love triangle
 
Joined: Aug 2003
Posts: 2,201
Likes: 3
From: Miami, FL
I am thinking that maybe his Canzoomer is the possible problem, not the launch. It looks like his 60ft was 2.3 which ain't that bad. He should either retune the CZ, or take it off and go back to stock and see if that solves anything.

Last edited by JeRKy 8 Owner; 10-03-2005 at 09:54 PM.
Old 10-03-2005 | 09:59 PM
  #23  
carbonRX8's Avatar
U-Stink-But-I-♥-U
iTrader: (1)
 
Joined: Mar 2005
Posts: 2,004
Likes: 1
From: 12 o'clock on the Beltway.
Just to play devils advocate, but could the ECU have intervened from the time when the 5.5 0-60 was posted (which really was 5.9 when you look at the graph in that thread) to when the 16sec quarter was posted? The canzoomer isn’t the in/out override computer that the interceptor is. Maybe that would help explain the results?

EDIOT NOTE: sorry 15.5 sec quarter.
Old 10-04-2005 | 12:32 AM
  #24  
RX8INCH's Avatar
Thread Starter
RX8INCH
 
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
I was told from the guy that it was a custom map thats in the CZ.. I dont have a laptop.. im hopin for my b-day i can save up the $ to get one.. and ill dyno the car and make see what map gives me the best results.. I havent reset the computer since my midpipe install..

As for the quote about my 0-60 times being reflected in my 1/4 mile times.. I do need to reset me g-tech because the 12" rollout that someone pointed out is ****.. I thought i was getting 5.5 but i wasnt.. Im not tryin to be all hard like my cars the ****.. or brag about it.. Just honestly thought that it was cool i got a 5.5.. and I still think that G-tech is accurate tho!

As for posting my 1/4 times after i said that.. I have nothin to hide.. and i am begin to think somethin was up with that 350...
a buddy of mine has a 93ish civic HB with a B20B(CRV) engine and V-tech heads.. intake, exhaust, and LSD.. he kicked my butt in the long run.

Still love the car!!!
Old 10-04-2005 | 12:34 AM
  #25  
RX8INCH's Avatar
Thread Starter
RX8INCH
 
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
Originally Posted by RX8INCH
15.5 1/4 mile
oh yea 15.1 adjusted time (this way i dont feel horrible about it)


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: My 1/4 mile adventure!!



All times are GMT -5. The time now is 09:18 AM.