The Official "RX8 in DSP" Thread
#577
You're only going to rev to 8600? That will likely limit you to around 60mph with the S1 diff and transmission, right?... seems like you will be riding limiter a lot, or I hope you're good at shifting lol. The last few nationals courses we've been at have resulted in riding limiter for a decent amount of time at 65-67mph for us.
#578
Awesome. Who are you going to have do the tuning? Do you have a "before" dyno result to compare to?
We will be there, and I will likely be running open with my fiance, Andrew.
Are you really wanting 18's? I think Nate is selling his RPF1's for less $ and they may also be lighter. If you're open to 17's there are some lighter and higher offset options that are just as wide AND cheaper.
We will be there, and I will likely be running open with my fiance, Andrew.
Are you really wanting 18's? I think Nate is selling his RPF1's for less $ and they may also be lighter. If you're open to 17's there are some lighter and higher offset options that are just as wide AND cheaper.
Elite Rotary Shop will likely be the tuner. Though they are an FD specialist, their tuner has been messing with RX8 tuning for awhile, and they have some RX8 specific part ideas they hinted at (though it might be all turbo related).
For that deal, I'm just passing along what I saw. I have 18x10 Forgestars that'll suffice for now.
#579
You're only going to rev to 8600? That will likely limit you to around 60mph with the S1 diff and transmission, right?... seems like you will be riding limiter a lot, or I hope you're good at shifting lol. The last few nationals courses we've been at have resulted in riding limiter for a decent amount of time at 65-67mph for us.
In fact, I hope to be using it alot. I also have the S2 trans with 4.77 rear gear.
#580
#581
What about the time you spent decelerating while over revving well past the power peak and then coasting on the limiter? It always depends on the situation too; how fast your car accelerates vs mine, the speed of your car at any given point compared to mine, where the upshift occurs vs where the downshift occurs, and so on. I also anticipate being able to flat foot shift at that time too, something I made the mistake of trying to do with an S1 trans once ... once ...
#582
What about the time you spent decelerating while over revving well past the power peak and then coasting on the limiter? It always depends on the situation too; how fast your car accelerates vs mine, the speed of your car at any given point compared to mine, where the upshift occurs vs where the downshift occurs, and so on. I also anticipate being able to flat foot shift at that time too, something I made the mistake of trying to do with an S1 trans once ... once ...
Im excited for you to get your car out. Will definitely be fun having more Rx8's in DSP!
#583
Premix allowance for 2018 came out in the July Fastrack:
Nothing yet on either radiator sizing changes or the Sohn oil injection adapter ....
#22032 Please update SP fuel section 15.10 allowances for #17062
The **** would like feedback on the following language being added to section 15.10, Engine and Drivetrain. The wording is identical to the new rule recommended in ST in the September 2016 Fastrack.
“Cars with combustion chamber oil injection systems (such as those in rotary engines) may supplement the standard engine lubrication system with additional oil supplied through the standard fuel delivery system.”
The **** would like feedback on the following language being added to section 15.10, Engine and Drivetrain. The wording is identical to the new rule recommended in ST in the September 2016 Fastrack.
“Cars with combustion chamber oil injection systems (such as those in rotary engines) may supplement the standard engine lubrication system with additional oil supplied through the standard fuel delivery system.”
#585
#586
We had a good weekend in Oscoda. Hurst was posed to take the win in Open DSP until second drivers went, and Strano got him by .001 - it doesn't get closer than that! In L1 I also ended up 2nd to Monfort, by .080, and 3rd overall to Whitener who took the win (L3 bumped to L1). Sunday afternoon in the Ladies Challenge I ended up breaking out (meaning I ran a time that would have won Ladies bump) and ended up 2nd after the skies opened up during the final round.
It was fun, close racing all weekend, at a beautiful site. We struggled a little with car setup on concrete- the car gets significantly pushier than on asphalt - but the final setup that I drove Sunday morning was pretty solid. Two more free hoosiers and a pile of Mazda money to take home made it a great weekend. Plus, having 15-20 people over to our lake front cottage to hang out by the campfire, paddle boat racing, and an RT challenge (loser drinks a terrible beer) made it a weekend to remember.
Here's my Ladies Challenge video. Never did get the back sweeper right.
It was fun, close racing all weekend, at a beautiful site. We struggled a little with car setup on concrete- the car gets significantly pushier than on asphalt - but the final setup that I drove Sunday morning was pretty solid. Two more free hoosiers and a pile of Mazda money to take home made it a great weekend. Plus, having 15-20 people over to our lake front cottage to hang out by the campfire, paddle boat racing, and an RT challenge (loser drinks a terrible beer) made it a weekend to remember.
Here's my Ladies Challenge video. Never did get the back sweeper right.
#588
Thanks!
Now time to install the long tube header I bought (and fab a new midpipe and get re-tuned) and make at least 1 more horsepower (hopefully more) so Jeff doesn't lose by .001 next time! I couldn't pass it up - got such a steal on it, used.
Also, I'm excited to see that DSP at nationals consists of nearly 1/3 RX8's now that Razny took on our friend Tim as a codriver! Razny, I heard good things about your car from Strano this weekend. I'm looking forward to seeing it in action at nats.
And lastly, SportsCar magazine did a nice writeup on how we've been developing my RX8 (okay it's mostly about me but there's a lot about the car too). Nice to see an RX8 grace the cover and hopefully it will bring some more interest/excitement to developing more of them. You guys can read it here: Sports Car - September 2017
Here's one baller shot they got of my car. Not bad looking for a $2,000 beater RX8 I think (~$12k all in now).
Now time to install the long tube header I bought (and fab a new midpipe and get re-tuned) and make at least 1 more horsepower (hopefully more) so Jeff doesn't lose by .001 next time! I couldn't pass it up - got such a steal on it, used.
Also, I'm excited to see that DSP at nationals consists of nearly 1/3 RX8's now that Razny took on our friend Tim as a codriver! Razny, I heard good things about your car from Strano this weekend. I'm looking forward to seeing it in action at nats.
And lastly, SportsCar magazine did a nice writeup on how we've been developing my RX8 (okay it's mostly about me but there's a lot about the car too). Nice to see an RX8 grace the cover and hopefully it will bring some more interest/excitement to developing more of them. You guys can read it here: Sports Car - September 2017
Here's one baller shot they got of my car. Not bad looking for a $2,000 beater RX8 I think (~$12k all in now).
The following users liked this post:
sharingan 19 (07-07-2021)
#590
#594
Thanks guys!
The header is marked "Pete's Speed". I saw a few mentions of it on this forum - sounds like it was a custom shop that made exhausts for Gram-Am and Koni Challenge cars (I think). It looked good, it was a steal, so I bought it We have a penciled in appointment for the 18th to get re-tuned, assuming we can fab up a new midpipe. We've gone to the same dyno everytime (EFI Logics in CT) so we will have a good comparison.
The header is marked "Pete's Speed". I saw a few mentions of it on this forum - sounds like it was a custom shop that made exhausts for Gram-Am and Koni Challenge cars (I think). It looked good, it was a steal, so I bought it We have a penciled in appointment for the 18th to get re-tuned, assuming we can fab up a new midpipe. We've gone to the same dyno everytime (EFI Logics in CT) so we will have a good comparison.
#595
Yes, they built the originals I believe, but it was a short tube version only. If it were me I'd cut off their extension and replace it with straight pipes into a 12 or 15 degree merge collector with full 3" outlet. Whoever modified it made a mistake choking it down like that imho ...
#596
Yes, they built the originals I believe, but it was a short tube version only. If it were me I'd cut off their extension and replace it with straight pipes into a 12 or 15 degree merge collector with full 3" outlet. Whoever modified it made a mistake choking it down like that imho ...
It has an incredibly long merge collector, so I don't think it was ever modified/extended. We are running a 2.5" exhaust anyway and don't intend to do 3" at this time.
#598
Here is what they originally look like, Speedsource sent me this pic back in 2005 or 2006
https://www.rx8club.com/rx-8-parts-s...8/#post4164551
https://www.rx8club.com/rx-8-parts-s...8/#post4164551
#600
Well maybe it's not clear to you. The collector is slip-on/removable in the SpeedSource pic. It looks to me like someone took the original short collector off and welded the longer choke collector on at that same position. Just an observation, not a criticism.