Packwood natl tour wtf???
#2
Registered
Join Date: Sep 2004
Location: Seattle, WA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Super Stock ran first, in cold, dirty conditions, so they're not a particularly good reference for comparison.
I know both Joe and I felt we had left a lot on the table, but yeah, Ron opened up a gigantic can of whoopass on his last run.
I know both Joe and I felt we had left a lot on the table, but yeah, Ron opened up a gigantic can of whoopass on his last run.
#4
Registered User
Join Date: May 2003
Location: Seattle
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Weather great.
Karl's crank broke in the MR2.
I had a great day one..paxing OK in the MiataR then BOOM! had a REALLY bad day2.
Miata was not geared correctly for day 2 course.(not really great gearing on day one either/10AE was near perfect gearing for both days).
Never got close to rev limiter either day but day 2 was a killer due to gearing. I don't think I got over 40 mph for the first 2/3 of the day 2 course. Too fast for first though...
Ron did put the smackdown on the class day 2 but still paxed out about a pax second short for the weekend.
Maybe the 968 tq pulled it through on day 2?
I bet a 04 up S2000 would of been awesome on the course.
Fun event. Indoor pits were nice.
No camping onsite which was a bummer cause lots of parties got split up.
One of the fun things at Bremerton is the camping/party onsite.
FM
Karl's crank broke in the MR2.
I had a great day one..paxing OK in the MiataR then BOOM! had a REALLY bad day2.
Miata was not geared correctly for day 2 course.(not really great gearing on day one either/10AE was near perfect gearing for both days).
Never got close to rev limiter either day but day 2 was a killer due to gearing. I don't think I got over 40 mph for the first 2/3 of the day 2 course. Too fast for first though...
Ron did put the smackdown on the class day 2 but still paxed out about a pax second short for the weekend.
Maybe the 968 tq pulled it through on day 2?
I bet a 04 up S2000 would of been awesome on the course.
Fun event. Indoor pits were nice.
No camping onsite which was a bummer cause lots of parties got split up.
One of the fun things at Bremerton is the camping/party onsite.
FM
#6
Thanks guys. I didn't realize that I had been faster than SS, but to be fair, Kevin ran a safe run on his 3rd run to stay clean. Stacey Molleker ran his SS Vette in ASP and ran a 46.5, so there was more time out there for SS.
In any case, both days were difficult for gearing on most cars. Both the RX-8s and the 968 were doing plenty of downshifting on day one. Joe also did on day 2, but Anna ran almost identical times using only 2nd, as did GH.
During fun runs on day 1 (yes, I said fun runs..... we were done with competition runs at 2:30 on Saturday and 1:10! on Sunday) Joe ran a 49.1 with a passenger. Not to be outdone, I ran a 48.9, albeit without a passenger.
In any case, I enjoyed Sunday a lot more.... ;-)
The next two weekends should be good. I'll be co-driving with Joe in his car for the Denver Tour this weekend, and with Keith Casey in his car for the Toledo Pro the following weekend. Should be some good comparisons to see just how the cars compare!
Ron
In any case, both days were difficult for gearing on most cars. Both the RX-8s and the 968 were doing plenty of downshifting on day one. Joe also did on day 2, but Anna ran almost identical times using only 2nd, as did GH.
During fun runs on day 1 (yes, I said fun runs..... we were done with competition runs at 2:30 on Saturday and 1:10! on Sunday) Joe ran a 49.1 with a passenger. Not to be outdone, I ran a 48.9, albeit without a passenger.
In any case, I enjoyed Sunday a lot more.... ;-)
The next two weekends should be good. I'll be co-driving with Joe in his car for the Denver Tour this weekend, and with Keith Casey in his car for the Toledo Pro the following weekend. Should be some good comparisons to see just how the cars compare!
Ron
#8
Registered
Join Date: Apr 2004
Location: Biggest Little City
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fastmike
I had a great day one..paxing OK in the MiataR then BOOM! had a REALLY bad day2.
...FM
...FM
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Fastmike, Icemastr, I wish I knew who you guys were while I was up there so I could have met you in person.
-Debbie
#9
Registered
Join Date: May 2003
Location: Redmond, WA
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
You wouldn't want to meet us we are both Miata drivers
. I didn't go to the NT anyways though because the owner of the car I was going to co-drive with decided not to go. I plan on racing a SM2 RX-7 or Vette next year or the year after though. I am still slow though.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#10
Registered User
Join Date: May 2003
Location: Seattle
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dknv
I share your pain, on Sunday I found myself facing my inexperience when I could not get the car to power out of those turns up into the sweepers.
But it was a fun and challenging course, a well-organized event, and the NW region holds nothing back in their hospitality and cameraderie.
Fastmike, Icemastr, I wish I knew who you guys were while I was up there so I could have met you in person.
-Debbie
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Fastmike, Icemastr, I wish I knew who you guys were while I was up there so I could have met you in person.
-Debbie
Shelbi and I and KevinD went to dinner with GH on Thursday night...maybe you were not there yet???
IF we have the Tour at Bremerton next year, it is a "don't miss" event.
I like being able to party onsite after racing but this is not possible at Packwood since it is private property.
I don't blame Greg for the funky short sections on course(Heck! I was course set up with him). Rumor was that Nat office wanted more room between the slalom and the rest of the course causing Greg to design around this requirement.
WAY more than what the rule book calls for.
Saturday was not as bad as Sunday IMO. It seemed to flow ok.
I had a lot of fun on Saturday running the course. Sunday was UGH.
In regards to the 968, I think that the 8 has an equal chance when it can get revved up in second gear but when you so many sections that catch the 8 at the top of first or the bottom of second too much, the 968 is going to always win due to TQ imo. Greg's 944 TQ'd me off on Sunday forsure!!LOL!
FM
#11
Registered
Join Date: Sep 2004
Location: Seattle, WA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure the RX-8's at that much of a disadvantage to the 968 when out of its powerband. The 968 is a slug off cam, and has a very pronounced surge in power at 4000 rpm. We were between gears in all the same places the RX-8 was this weekend -- I was shifting four times on Saturday's course.
I still say we should find a freeway somewhere and do some rolling acceleration comparisons between my 968 and someone's RX-8...
I still say we should find a freeway somewhere and do some rolling acceleration comparisons between my 968 and someone's RX-8...
Last edited by PedalFaster; 07-26-2005 at 02:35 AM.
#12
Originally Posted by PedalFaster
I'm not sure the RX-8's at that much of a disadvantage to the 968 when out of its powerband. The 968 is a slug off cam, and has a very pronounced surge in power at 4000 rpm. We were between gears in all the same places the RX-8 was this weekend -- I was shifting four times on Saturday's course.
I still say we should find a freeway somewhere and do some rolling acceleration comparisons between my 968 and someone's RX-8...
I still say we should find a freeway somewhere and do some rolling acceleration comparisons between my 968 and someone's RX-8...
However should not be an issue in KS.
![Cool](https://www.rx8club.com/images/smilies/cool.gif)
#13
Registered
Join Date: Sep 2004
Location: Seattle, WA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Instead of worrying about our dinky little four cylinder when the going gets tight, we should all be worrying about those 350Zs. Very few people noticed that the third-fastest BS time on Sunday was actually set by Glenn Austin in his 350Z...
#14
Registered
Join Date: Apr 2004
Location: Biggest Little City
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PedalFaster
Instead of worrying about our dinky little four cylinder when the going gets tight, we should all be worrying about those 350Zs. Very few people noticed that the third-fastest BS time on Sunday was actually set by Glenn Austin in his 350Z...
#15
Registered User
Join Date: May 2003
Location: Seattle
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PedalFaster
I'm not sure the RX-8's at that much of a disadvantage to the 968 when out of its powerband. The 968 is a slug off cam, and has a very pronounced surge in power at 4000 rpm. We were between gears in all the same places the RX-8 was this weekend -- I was shifting four times on Saturday's course.
I still say we should find a freeway somewhere and do some rolling acceleration comparisons between my 968 and someone's RX-8...
I still say we should find a freeway somewhere and do some rolling acceleration comparisons between my 968 and someone's RX-8...
I think you should use the tq if you have it..
You diff sounds weird too..Like it kinda chatters while turning and accelerating.
Maybe you should run better/different oil in it?
I don't think the shift to first in the finish on Saturday gained anything either for anyone. I just looped around it at a high speed.
You have 150lbsft of tq at 2000 rpms at the rear wheels. That is pretty good. I will compare it to the 8's which is on my home computer when I get home tonight.
When and where do you want to do this roll on?
I think the 968 is going to walk away from the 8.
Get going about 35 in second gear and punch it until whatever car hits it's revlimiter in second.
How fast does the 968 go in first and second?
8 might have some overrev in second on the 968 though.
8 will be at Everett on Saturday for ladies practice.
Doesn't have the straight pipe yet though which should help a little.
Gonna be there to help?
I might(not confirmed yet) have a 04 TurboPorsche showing up with a couple ladies that want to try out autoxing...
FM
Last edited by fastmike; 07-26-2005 at 02:57 PM.
#16
Registered
iTrader: (25)
there's no point comparing an RX-8 with a 968 in straight line speed contest, that's not where the RX-8's strength is nor is it really relative to an autox comparison
no problem shifting to first in my RX-8, it has triple synchros, practiced it plenty of times on the street but have yet to run an autox course that required doing so, my RX-8 starts coming on strong around 3500 rpm, which in 2nd gear is 25 mph on race tires
Catback straight pipe on an RX-8 will require earplugs if you intend to drive it on the street for any distance, not so much the volume (though quite loud) as the high pitched frequency buzz that drills straight into the core of your brain, I'm sure I suffered hearing damage on the trip to Wendover
no problem shifting to first in my RX-8, it has triple synchros, practiced it plenty of times on the street but have yet to run an autox course that required doing so, my RX-8 starts coming on strong around 3500 rpm, which in 2nd gear is 25 mph on race tires
Catback straight pipe on an RX-8 will require earplugs if you intend to drive it on the street for any distance, not so much the volume (though quite loud) as the high pitched frequency buzz that drills straight into the core of your brain, I'm sure I suffered hearing damage on the trip to Wendover
#17
Registered User
Join Date: May 2003
Location: Seattle
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
The course this weekend totally favored low rpm TQ which imo, does make the "roll on" a good comparison for autox between the 8 and 968.
I listened to another 8 with a straight pipe and liked the sound. Not bad at all...Did I do Fwy cruising with it? nope....Sure was a high quality job.
Place for a SS straight through muffler if needed at a later date. That thing sure sounded GOOD on course though!!!
Rumors that the 968 is misclassed come and go. Just want to add some real world tests to the debate.
My guess is that the 8 will outbrake the 968 in any test so that might be a +++ for the 8.
FM
I listened to another 8 with a straight pipe and liked the sound. Not bad at all...Did I do Fwy cruising with it? nope....Sure was a high quality job.
Place for a SS straight through muffler if needed at a later date. That thing sure sounded GOOD on course though!!!
Rumors that the 968 is misclassed come and go. Just want to add some real world tests to the debate.
My guess is that the 8 will outbrake the 968 in any test so that might be a +++ for the 8.
FM
#18
FWIW, the 968 has a Variocam or something like that which really changes it's character at higher revs. I think it's VERY worthwhile to downshift the car in most of the same instances that the 8 downshifts.
We're still fighting inside wheelspin, so 2nd gear had plenty to break that inside tire loose as it was on Sunday. 1st was just another possibility of getting it all wrong! ;-)
Ron
We're still fighting inside wheelspin, so 2nd gear had plenty to break that inside tire loose as it was on Sunday. 1st was just another possibility of getting it all wrong! ;-)
Ron
#20
Registered
iTrader: (25)
Originally Posted by fastmike
The course this weekend totally favored low rpm TQ which imo, does make the "roll on" a good comparison for autox between the 8 and 968.
I listened to another 8 with a straight pipe and liked the sound. Not bad at all...Did I do Fwy cruising with it? nope....Sure was a high quality job.
Place for a SS straight through muffler if needed at a later date. That thing sure sounded GOOD on course though!!!
Rumors that the 968 is misclassed come and go. Just want to add some real world tests to the debate.
My guess is that the 8 will outbrake the 968 in any test so that might be a +++ for the 8.
FM
I listened to another 8 with a straight pipe and liked the sound. Not bad at all...Did I do Fwy cruising with it? nope....Sure was a high quality job.
Place for a SS straight through muffler if needed at a later date. That thing sure sounded GOOD on course though!!!
Rumors that the 968 is misclassed come and go. Just want to add some real world tests to the debate.
My guess is that the 8 will outbrake the 968 in any test so that might be a +++ for the 8.
FM
eh, I'm sure you know more about it than me ... best wishes
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#21
Registered User
Join Date: May 2003
Location: Seattle
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Send me a mail when you get back Steve and we will go eat and do the test(s).
I looked at Shelbi's dyno sheets with her ghetto straight pipe and stock exhaust(straight pipe best with a little high rpm missing).
They are in MPH(4th gear I think) and not rpm(too lazy to do the conversion) but 8 has a little over 100 ft lbs going up to 133-8ftlbs(140ft lbs on it's best run) and back down to a little over 100ft lbs at rev limiter.
Hp gets up to mid 180's.
I think? the 8 is geared higher then the 968 in first and second so....any quesses to which one is going to win this "roll on" tq/gearing test?
I do think that this matters alot in autox in this years BS class.
I think that 8 is lighter than the 968(how much???) which negates "some" of the 968 advantage on certain sections of certain courses.
FM
I looked at Shelbi's dyno sheets with her ghetto straight pipe and stock exhaust(straight pipe best with a little high rpm missing).
They are in MPH(4th gear I think) and not rpm(too lazy to do the conversion) but 8 has a little over 100 ft lbs going up to 133-8ftlbs(140ft lbs on it's best run) and back down to a little over 100ft lbs at rev limiter.
Hp gets up to mid 180's.
I think? the 8 is geared higher then the 968 in first and second so....any quesses to which one is going to win this "roll on" tq/gearing test?
I do think that this matters alot in autox in this years BS class.
I think that 8 is lighter than the 968(how much???) which negates "some" of the 968 advantage on certain sections of certain courses.
FM
#22
Originally Posted by fastmike
Send me a mail when you get back Steve and we will go eat and do the test(s).
I looked at Shelbi's dyno sheets with her ghetto straight pipe and stock exhaust(straight pipe best with a little high rpm missing).
They are in MPH(4th gear I think) and not rpm(too lazy to do the conversion) but 8 has a little over 100 ft lbs going up to 133-8ftlbs(140ft lbs on it's best run) and back down to a little over 100ft lbs at rev limiter.
Hp gets up to mid 180's.
I think? the 8 is geared higher then the 968 in first and second so....any quesses to which one is going to win this "roll on" tq/gearing test?
I do think that this matters alot in autox in this years BS class.
I think that 8 is lighter than the 968(how much???) which negates "some" of the 968 advantage on certain sections of certain courses.
FM
I looked at Shelbi's dyno sheets with her ghetto straight pipe and stock exhaust(straight pipe best with a little high rpm missing).
They are in MPH(4th gear I think) and not rpm(too lazy to do the conversion) but 8 has a little over 100 ft lbs going up to 133-8ftlbs(140ft lbs on it's best run) and back down to a little over 100ft lbs at rev limiter.
Hp gets up to mid 180's.
I think? the 8 is geared higher then the 968 in first and second so....any quesses to which one is going to win this "roll on" tq/gearing test?
I do think that this matters alot in autox in this years BS class.
I think that 8 is lighter than the 968(how much???) which negates "some" of the 968 advantage on certain sections of certain courses.
FM
#23
Registered
Join Date: Sep 2004
Location: Seattle, WA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't put too much weight on dyno chart comparisons, both because conditions may have varied, and also because of the RX-8's known tendency to dyno low.
We spot you a bit over a hundred pounds. We weighed the 968 at Atwater, and while I forget its exact weight, it was around 2940 - 2950 lbs. in race trim. From what I've seen, prepped RX-8s get into the low- to mid-2800s; there was some talk earlier of sub-2800 lb. cars, but I've yet to see one myself.
I don't know whose first gear ends first, but I noticed at Packwood that Anna Goeke was riding rev limiter in first gear between the start and the first turnaround for noticeably longer than Annie or Ron. This suggests that either the RX-8's first gear is shorter, or the RX-8 launches harder.
We spot you a bit over a hundred pounds. We weighed the 968 at Atwater, and while I forget its exact weight, it was around 2940 - 2950 lbs. in race trim. From what I've seen, prepped RX-8s get into the low- to mid-2800s; there was some talk earlier of sub-2800 lb. cars, but I've yet to see one myself.
I don't know whose first gear ends first, but I noticed at Packwood that Anna Goeke was riding rev limiter in first gear between the start and the first turnaround for noticeably longer than Annie or Ron. This suggests that either the RX-8's first gear is shorter, or the RX-8 launches harder.
#24
Registered User
Join Date: May 2003
Location: Seattle
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ULLLOSE
If your dyno run was in 4th gear you need to do it over. 5th gear is 1-1 in the RX8 not 4th.
FM
#25
Registered User
Join Date: May 2003
Location: Seattle
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PedalFaster
I wouldn't put too much weight on dyno chart comparisons, both because conditions may have varied, and also because of the RX-8's known tendency to dyno low.
We spot you a bit over a hundred pounds. We weighed the 968 at Atwater, and while I forget its exact weight, it was around 2940 - 2950 lbs. in race trim. From what I've seen, prepped RX-8s get into the low- to mid-2800s; there was some talk earlier of sub-2800 lb. cars, but I've yet to see one myself.
I don't know whose first gear ends first, but I noticed at Packwood that Anna Goeke was riding rev limiter in first gear between the start and the first turnaround for noticeably longer than Annie or Ron. This suggests that either the RX-8's first gear is shorter, or the RX-8 launches harder.
We spot you a bit over a hundred pounds. We weighed the 968 at Atwater, and while I forget its exact weight, it was around 2940 - 2950 lbs. in race trim. From what I've seen, prepped RX-8s get into the low- to mid-2800s; there was some talk earlier of sub-2800 lb. cars, but I've yet to see one myself.
I don't know whose first gear ends first, but I noticed at Packwood that Anna Goeke was riding rev limiter in first gear between the start and the first turnaround for noticeably longer than Annie or Ron. This suggests that either the RX-8's first gear is shorter, or the RX-8 launches harder.
In regards to dyno'ing low, we had about 10 8's there on that dyno day and Shelbi's was pretty good but not the best and all numbers are corrected for whatever the "70F at sea-level" or whatever dynojet uses for a correction factor.
TQ is pretty pitiful for the car....I think my Miata might beat the thing in a 20-45mph second gear roll on.
It would be interesting to do a math chart of the 2 cars gearing/tire od to see what is up.
The 8 does go to near 9000 rpm so I don't know what mph that is in first. I am surprised that you guys(968) were not shifting to second at the Sunday start section???
I was in second for a good ways in the Miata.
FM
FM