rx8 turbo in-car video buttonwillow 4-12-08
#8
Sparky!
iTrader: (3)
Join Date: Sep 2004
Location: East Jesus (Murphy, TX)
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
Nice videos. Can I offer a few suggestions?
- Work on keeping both hands on the wheel. There are several instances where you've got your right hand on the shifter for an extended period of time. Watch video of good, experienced drivers, and you will notice that they only take their right hand off the wheel to shift, and then that hand goes right back to the wheel.
- Learn to carry more speed through the corner. Your car is faster than most in a straight line, but you're braking too hard entering most turns. Don't use horsepower to make up for poor mid-corner speed.
- I don't know WTF is dangling from your mirror, but lose it. Not only is it a safety hazard, but its annoying. Its also a distraction.
#10
#12
road warrior
Join Date: Feb 2006
Location: Oakland and Los Angeles, CA
Posts: 1,861
Likes: 0
Received 3 Likes
on
3 Posts
That's a protection charm. I personally wouldn't drive with it as I clear my car of all items, but that thing could hit you at 1,000 mph and it wouldn't do a lick of damage. It's just a soft poach.
#13
Sparky!
iTrader: (3)
Join Date: Sep 2004
Location: East Jesus (Murphy, TX)
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
I'm not concerned about it doing any damage directly, but if it comes loose and flies towards his helmet his natural reaction is going to be to flinch... and flinching in the middle of a 110 mph sweeper usually doesn't turn out so well.
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: Los Angeles
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Nice videos. Can I offer a few suggestions?
- Work on keeping both hands on the wheel. There are several instances where you've got your right hand on the shifter for an extended period of time. Watch video of good, experienced drivers, and you will notice that they only take their right hand off the wheel to shift, and then that hand goes right back to the wheel.
- Learn to carry more speed through the corner. Your car is faster than most in a straight line, but you're braking too hard entering most turns. Don't use horsepower to make up for poor mid-corner speed.
- I don't know WTF is dangling from your mirror, but lose it. Not only is it a safety hazard, but its annoying. Its also a distraction.
we were running at the beginner group.
i am still learning this track. after watching these video a few times, i know i can do better next time, especially some of those mid-high speed turns. i usually keep my both hands on the wheel, don't know why i didn't do that during that session??
i think i will take that charm off next time.
Last edited by sammytcl; 04-15-2008 at 01:54 PM.
#21
Sparky!
iTrader: (3)
Join Date: Sep 2004
Location: East Jesus (Murphy, TX)
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
thanks for your suggestions.
we were running at the beginner group.
i am still learning this track. after watching these video a few times, i know i can do better next time, especially some of those mid-high speed turns. i usually keep my both hands on the wheel, don't know why i didn't do that during that session??
i think i will take that charm off next time.
we were running at the beginner group.
i am still learning this track. after watching these video a few times, i know i can do better next time, especially some of those mid-high speed turns. i usually keep my both hands on the wheel, don't know why i didn't do that during that session??
i think i will take that charm off next time.
Overall, I'd say you were doing very well. You've got good technique, just keep getting more seat time!
#23
Registered
iTrader: (3)
For that track Sammy you need better gearing? With the power you now have it seems that a slightly lower gear could put into using 4th more and not having to shift as much. Of course i dont know what rpms you mainly stay at---but nice vids man and i really enjoyed them. Keep them coming!
I hope I can get some from my Roebling event next month.
olddragger
I hope I can get some from my Roebling event next month.
olddragger
#25
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: Los Angeles
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
For that track Sammy you need better gearing? With the power you now have it seems that a slightly lower gear could put into using 4th more and not having to shift as much. Of course i dont know what rpms you mainly stay at---but nice vids man and i really enjoyed them. Keep them coming!
I hope I can get some from my Roebling event next month.
olddragger
I hope I can get some from my Roebling event next month.
olddragger
actually, i think the final gear ratio is fine. i just had too much braking/downshift on some of the turns. i shifted at around 8500rpm, and most of the time, it was at 5500-8500 rpm.