S1 CAN PIDs
#2
What am I doing here?
Join Date: Mar 2006
Location: 2017 Miata RF Launch Edition
Posts: 3,606
Received 649 Likes
on
510 Posts
I may be able to work on this in a month or two. I have the parts to build an Arduino CAN logger but I lack the time.
If you use OBD Fusion on your mobile device, you can buy the $10 add-on pack to get access to all of Mazda's private PIDs. They're listed by name so you'll have to jump through some packet sniffing hoops to match up names to actual PIDs
If you use OBD Fusion on your mobile device, you can buy the $10 add-on pack to get access to all of Mazda's private PIDs. They're listed by name so you'll have to jump through some packet sniffing hoops to match up names to actual PIDs
#3
Modulated Moderator
iTrader: (3)
What are you trying to do? I have some of the CAN stuff.. Dash and wheel speed and stuff to make the power steering work. and have a CAN sniffer.... but don't have a functional car right now to do any logging
I hope to use a buddies car and do some logs at some point 5o see if I can figure out more stuff
I hope to use a buddies car and do some logs at some point 5o see if I can figure out more stuff
#6
Registered
iTrader: (25)
I’m sure many are common, but there are a few unique ones for RX8 not on here; they got a few from this forum:
https://forum.miata.net/vb/showthread.php?t=631418
https://forum.miata.net/vb/showthread.php?t=631418
#7
Registered
Thread Starter
I’m sure many are common, but there are a few unique ones for RX8 not on here; they got a few from this forum:
https://forum.miata.net/vb/showthread.php?t=631418
https://forum.miata.net/vb/showthread.php?t=631418
The following users liked this post:
Nadrealista (03-30-2021)
#10
Registered
This link has proven to be accurate for my purposes:
Mazda CAN Bus ? Madox.NET
I don't have a Renesis or stock ECU, but I'm logging the individual wheel speeds to my RaceCapture. I'm also using the RaceCapture to send CAN data to the OEM gauge cluster via a Lua script - https://www.rx8club.com/series-i-eng...luster-268611/
Throttle position appears to be 0x201 byte 6. Scale is divide by 2.
Mazda CAN Bus ? Madox.NET
I don't have a Renesis or stock ECU, but I'm logging the individual wheel speeds to my RaceCapture. I'm also using the RaceCapture to send CAN data to the OEM gauge cluster via a Lua script - https://www.rx8club.com/series-i-eng...luster-268611/
Throttle position appears to be 0x201 byte 6. Scale is divide by 2.
#12
Registered
Thread Starter
I don't think the S1 ECU will communicate that (steering and break pressure) data over CAN. I am going to see about RPM, Brake (just on or off) and Throttle tonight.
#13
Registered
iTrader: (25)
Well maybe you’re confused; the only CAN data in a displayable format are the items listed in the Mazda PID/DATA list per the Definition and Unit/Condition parameters as indicated in my posts above.
Which neither of those are listed or formatted for what you’re seeking. You’d have to install the devices and setup the software parameters for both on your own to have that data.
Which neither of those are listed or formatted for what you’re seeking. You’d have to install the devices and setup the software parameters for both on your own to have that data.
Last edited by TeamRX8; 05-30-2019 at 04:48 PM.
#14
Registered
Pages 20 and 22 of the electrical FSM show the steering angle sensor connected to the CAN bus on DSC cars. I have a non-DSC car, so I can't test it. But the link I shared above ID's the steering angle data @ 0x4DA bytes 0 and 1. I would bet that it's available there.
Just because data is not available via OBD, that doesn't mean that it's not floating around on the CAN-bus somewhere.
Just because data is not available via OBD, that doesn't mean that it's not floating around on the CAN-bus somewhere.
#15
Registered
iTrader: (25)
Well that’s assuming angle is actually being measured rather than some other value. It still might serve as a reference value, hard to say without the actual data. I’m aware of it for the ND MX5; not the NC/RX8, but then I don’t claim to be fully informed on the subject.
I’ll concede that it’s more likely for there to be a steering angle value than brake pressure value by virtue of the devices being used. It’s possible that some of the data didn’t exist until later in the production cycle, either during the S2 or after RX8 production ceased. The NC thread stated that they couldn’t get those to work.
I’ll concede that it’s more likely for there to be a steering angle value than brake pressure value by virtue of the devices being used. It’s possible that some of the data didn’t exist until later in the production cycle, either during the S2 or after RX8 production ceased. The NC thread stated that they couldn’t get those to work.
Last edited by TeamRX8; 05-31-2019 at 11:58 AM.
#16
Registered
I have a RaceCapture Pro Mk3, and I have the throttle position sensor mapped. If you like, I can send you the channel info when i get home tonight.
Incidentally, I've had nothing but trouble getting OBDII channels working. If i map even one, it messes with the car. Are you mapping any OBDII?
#17
Registered
Thread Starter
I didn't see this thread.
I have a RaceCapture Pro Mk3, and I have the throttle position sensor mapped. If you like, I can send you the channel info when i get home tonight.
Incidentally, I've had nothing but trouble getting OBDII channels working. If i map even one, it messes with the car. Are you mapping any OBDII?
I have a RaceCapture Pro Mk3, and I have the throttle position sensor mapped. If you like, I can send you the channel info when i get home tonight.
Incidentally, I've had nothing but trouble getting OBDII channels working. If i map even one, it messes with the car. Are you mapping any OBDII?
OBDII maping works if the PIDs are in passive mode. I presume you had the gnarly engine cut outs above 8k?
Would love to see what you have for throttle trace on CAN.
#18
Registered
iTrader: (25)
I didn't see this thread.
I have a RaceCapture Pro Mk3, and I have the throttle position sensor mapped. If you like, I can send you the channel info when i get home tonight.
Incidentally, I've had nothing but trouble getting OBDII channels working. If i map even one, it messes with the car. Are you mapping any OBDII?
I have a RaceCapture Pro Mk3, and I have the throttle position sensor mapped. If you like, I can send you the channel info when i get home tonight.
Incidentally, I've had nothing but trouble getting OBDII channels working. If i map even one, it messes with the car. Are you mapping any OBDII?
need to improve those GoogleFu skills:
https://forum.autosportlabs.com/view...fb7e14105f3335
.
#19
Registered
1. On that forum, Dadspeed is me.
2. It did not work, and Brent has spent the last year and a half not solving the problem.
I actually forgot entirely that I posted on that forum. I didn’t find it useful.
2. It did not work, and Brent has spent the last year and a half not solving the problem.
I actually forgot entirely that I posted on that forum. I didn’t find it useful.
#20
Registered
Thread Starter
#21
Registered
#22
Registered
Thread Starter
That's fantastic. I had a thought that maybe some kind of math channel for steering angle could be made by calculating the difference between the two front wheels.
#23
Registered
Interesting, this document shows what CAN PIDs AiM can log with their devices:
https://www.aimtechnologies.com/supp...08_105_eng.pdf
I wish I could get those parameters. I would really like to be able to display fuel level grrrrrrrr.
#24
Registered
Thread Starter
Steering angle has got to be available via CAN.
Interesting, this document shows what CAN PIDs AiM can log with their devices:
https://www.aimtechnologies.com/supp...08_105_eng.pdf
I wish I could get those parameters. I would really like to be able to display fuel level grrrrrrrr.
Interesting, this document shows what CAN PIDs AiM can log with their devices:
https://www.aimtechnologies.com/supp...08_105_eng.pdf
I wish I could get those parameters. I would really like to be able to display fuel level grrrrrrrr.
The following users liked this post:
Mr. Pockets (06-03-2019)
#25
Registered