Wheel and Tire Auto-x Setup?
#1
![Question](https://www.rx8club.com/images/icons/icon5.gif)
Forgive my "newness", I am sure that this has been covered in other threads. I just purchased an 05 and am in the market for a good wheel/tire setup that will allow me to stay in B-stock. I am currently running an 04 MS miata. I have had decent success this year with it, but having driven both cars now, the rx8 seems to be the better of the two. Thank you in advance for your input.
Chuck
Chuck
#3
After the Dunlops get a little wear in them, I plan on putting MX's on for the street. On the miata, I run Hoosier, but the Khumo 710's seem to be pretty good. Havn't checked the sizes yet though...
#6
Originally Posted by Imp
245/35-18 V710 for BS. No other tire comes close at this time.
Also... learn the search funtion here.. the natives can be pretty brutal.
Also... learn the search funtion here.. the natives can be pretty brutal.
#7
05-08 SCCA BS Natl Champ
iTrader: (1)
Originally Posted by whiterex
Sorry, not trying to seem lazy or cause confusion. The latest edition of Sportscar Magazine has the national results and B-stock seemed to be run over with rx8's... Just wondered what the majority setup for suspention/wheels/tires was. I plan on searching for the answer, just wanted more input.(which wheels, offset, tires, ect..) Having read some of the threads, the people on this forum seem to know what they are talking about. Didn't mean to be unclear... my appologies.
245-35-18 Kumho V710
Koni shocks
#12
05-08 SCCA BS Natl Champ
iTrader: (1)
Originally Posted by Sparky
I'm pretty sure we haven't heard about this one. Anyone care to educate us?
#13
05-08 SCCA BS Natl Champ
iTrader: (1)
Originally Posted by TeamRX8
how about the one that consistently ran the fastest times :fawk:
![Wavey](https://www.rx8club.com/images/smilies/wavey.gif)
![Wavey](https://www.rx8club.com/images/smilies/wavey.gif)
![Bsmeter](https://www.rx8club.com/images/smilies/bsmeter.gif)
![Wavey](https://www.rx8club.com/images/smilies/wavey.gif)
#16
Originally Posted by ULLLOSE
SSR Comp wheels. 18X8
245-35-18 Kumho V710
Koni shocks
245-35-18 Kumho V710
Koni shocks
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Chuck
#17
Yada, yada, yada...
Join Date: Jan 2004
Location: Indianapolis, IN
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Same questions here about the front sway bar. I have noticed too much under steer and I was wondering if this mod will make the car more neutral or emphasize more over steer?
Great info here so far. Thanks!
Great info here so far. Thanks!
#19
Yada, yada, yada...
Join Date: Jan 2004
Location: Indianapolis, IN
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I would start with the driver (jaja!) What I can tell you is that almost every time I am pushing the car while cornering, the car under steers a lot. I can't get the back loose.
I even noticed this on the first RX8 I test drove. So, it may be the driver...
I even noticed this on the first RX8 I test drove. So, it may be the driver...
#20
Registered
Join Date: Oct 2005
Location: Mason City, Iowa
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Just picked up my base RX8 on Saturday. I had to drive a ways to get it, so it is all broken in. Can't wait to get it set up for next year.
Is everyone running SSR Comps or are there alternatives? I have looked, and there does not seem to be anything close to them, but was wondering. I watched you guys run at nationals and I can't remember any other type of wheels. Even the custom wheels out there (e.g., Kodiak) seem to weigh more for a higher price.
Koni's are the only way to go at this point? I am tempted to go with the D-spec Tokico's because of the apparent ease of adjustment, but it seems that everyone is rather dubious about how good they will be.
Where do you get the Team RX-8 bar?
Thanks.
Is everyone running SSR Comps or are there alternatives? I have looked, and there does not seem to be anything close to them, but was wondering. I watched you guys run at nationals and I can't remember any other type of wheels. Even the custom wheels out there (e.g., Kodiak) seem to weigh more for a higher price.
Koni's are the only way to go at this point? I am tempted to go with the D-spec Tokico's because of the apparent ease of adjustment, but it seems that everyone is rather dubious about how good they will be.
Where do you get the Team RX-8 bar?
Thanks.
#22
Registered
iTrader: (25)
I don't recommend changing from the OE endlinks unless you have a coilover setup and are doing corner balancing, then you need adjustable endlinks. The OE endlinks are fine unless you go to an extremely stiff bar setup.
The drilled hole isn't worth much, maybe 10% at best, which in swaybar rate terms is almost nothing. It's better than nothing I suppose, but IMO not anywhere near what the car responds best too when fully setup. The Mazdaspeed bar is only a bit stiffer than the drilled hole, still too soft IMO and the RB bar is way stiffer than OE which IMO is way too stiff for most conditions.
The TeamRX8 bar is max strength/min weight tubular chromemoly, pwdercoated black to have an OE appearance, has 5 adjustment positions and comes with sturdy alignment collars and greasable urethane bushings with plated brackets. It fills a good part of the gap between the MS and RB bars. Unfortunately it's been pure h-ll getting them built. Thought they would finally be done several weeks ago and they boffed the adjustment hole locations. Another delay while they redo the entire order.
I refuse to compromise on the intended quality, so they won't be out until they're right. It will be a short run, only 25 bars. I don't intend to have any more made after that.
The drilled hole isn't worth much, maybe 10% at best, which in swaybar rate terms is almost nothing. It's better than nothing I suppose, but IMO not anywhere near what the car responds best too when fully setup. The Mazdaspeed bar is only a bit stiffer than the drilled hole, still too soft IMO and the RB bar is way stiffer than OE which IMO is way too stiff for most conditions.
The TeamRX8 bar is max strength/min weight tubular chromemoly, pwdercoated black to have an OE appearance, has 5 adjustment positions and comes with sturdy alignment collars and greasable urethane bushings with plated brackets. It fills a good part of the gap between the MS and RB bars. Unfortunately it's been pure h-ll getting them built. Thought they would finally be done several weeks ago and they boffed the adjustment hole locations. Another delay while they redo the entire order.
![Squint](https://www.rx8club.com/images/smilies/squint.gif)
#24
What's next?
Join Date: Feb 2004
Location: SE Mass
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Chuck... use this secret link. (But you didn't get it from me, you never heard of me, this conversation never happened....)
#25
Registered
iTrader: (25)
it won't work without the decoder ring and combination though
![Wallbash](https://www.rx8club.com/images/smilies/wallbash.gif)
I would prefer that people email me with swaybar questions: TeamMazdaRX8@aol.com
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
![Wallbash](https://www.rx8club.com/images/smilies/wallbash.gif)
I would prefer that people email me with swaybar questions: TeamMazdaRX8@aol.com
![Wavey](https://www.rx8club.com/images/smilies/wavey.gif)
Last edited by TeamRX8; 11-02-2005 at 02:23 PM.